Search results

This study aims to enable robotic friction stir welding (FSW) in practice. The use of robots has hitherto been limited, because of the large contact forces necessary for FSW. These forces are detrimental for the position accuracy of the robot. In this context, it is not sufficient to rely on the robot’s internal sensors for positioning. This paper describes and evaluates a new method for overcoming this issue.

A closed-loop robot control system for seam-tracking control and force control, running and recording data in real-time operation, was developed. The complete system was experimentally verified. External position measurements were obtained from a laser seam tracker and deviations from the seam were compensated for, using feedback of the measurements to a position controller.

The proposed system was shown to be working well in overcoming position error. The system is flexible and reconfigurable for batch and short production runs. The welds were free of defects and had beneficial mechanical properties.

In the experiments, the laser seam tracker was used both for control feedback and for performance evaluation. For evaluation, it would be better to use yet another external sensor for position measurements, providing ground truth.

These results imply that robotic FSW is practically realizable, with the accuracy requirements fulfilled.

The method proposed in this research yields very accurate seam tracking as compared to previous research. This accuracy, in turn, is crucial for the quality of the resulting material.

This paper aims to present a deflection model to improve positional accuracy of industrial robots. Earlier studies have demonstrated the lack of accuracy of heavy-duty robots when exposed to high external forces. One application where the robot is pushed to its limits in terms of forces is friction stir welding (FSW). This process requires the robot to deliver forces of several kilonewtons causing deflections in the robot joints. Especially for robots with serial kinematics, these deflections will result in significant tool deviations, leading to inferior weld quality.

This paper presents a kinematic deflection model, assuming a rigid link and flexible joint serial kinematics robot. As robotic FSW is a process which involves high external loads and a constant welding speed of usually below 50 mm/s, many of the dynamic effects are negligible. The model uses force feedback from a force sensor, embedded on the robot, and predicts the tool deviation, based on the measured external forces. The deviation is fed back to the robot controller and used for online path compensation.

The model is verified by subjecting an FSW tool to an external load and moving it along a path, with and without deviation compensation. The measured tool deviation with compensation was within the allowable tolerance for FSW.

The model can be applied to other robots with a force sensor.

The presented deflection model is based on force feedback and can predict and compensate tool deviations online.

Friction stir welding (FSW) is a novel method for joining materials without using consumables and without melting the materials. The purpose of this paper is to present the state of the art in robotic FSW and outline important steps for its implementation in industry and specifically the automotive industry.

This study focuses on the robot deflections during FSW, by relating process forces to the deviations from the programmed robot path and to the strength of the obtained joint. A robot adapted for the FSW process has been used in the experimental study. Two sensor‐based methods are implemented to determine path deviations during test runs and the resulting welds were examined with respect to tensile strength and path deviation.

It can be concluded that deflections must be compensated for in high strengths alloys. Several strategies can be applied including online sensing or compensation of the deflection in the robot program. The welding process was proven to be insensitive for small deviations and the presented path compensation methods are sufficient to obtain a strong and defect‐free welding joint.

This paper demonstrates the effect of FSW process forces on the robot, which is not found in literature. This is expected to contribute to the use of robots for FSW. The experiments were performed in a demonstrator facility which clearly showed the possibility of applying robotic FSW as a flexible industrial manufacturing process.

The purpose of this study is to present a comprehensive review of the fundamental concepts and terminologies pertaining to different types of aluminium metal matrix composites, their joining techniques and challenges, friction stir welding (FSW) process, post-welding characterizations and basic control theory of FSW, followed by the discussions on the research reports in these areas.

Joining of aluminium metal matrix composites (Al-MMC) poses many challenges. These materials have their demanding applications in versatile domains, and hence it is essential to understand their weldability and material characteristics. FSW is a feasible choice for joining of Al-MMC over the fusion welding because of the formation of narrow heat affected zone and minimizing the formation of intermetallic compounds at weld interface. The goal in FSW is to generate enough thermal energy by friction between the workpiece and rotating tool. Heat energy is generated by mechanical interaction because of the difference in velocity between the workpiece and rotating tool. In the present work, a detailed survey is done on the above topics and an organised conceptual context is presented. A complete discussion on significance of FSW process parameters, control schemes, parameter optimization and weld quality monitoring are presented, along with the analysis on relation between the interdependent parameters.

Results from the study present the research gaps in the FSW studies for joining of the aluminium-based metal matrix composites, and they highlight further scope of studies pertaining to this domain.

It is observed that the survey done on FSW of Al-MMCs and their control theory give an insight into the fundamental concepts pertaining to this research area to enhance interdisciplinary technology exploration.