Search results

1 – 2 of 2
Per page
102050
Citations:
Loading...
Access Restricted. View access options
Article
Publication date: 13 July 2021

Mohammad Pourbagher, Changiz Ghobadi, Javad Nourinia and Rahim Naderali

To achieve right-hand circular polarization (RHCP), a 3-dB Wilkinson power divider with a λ/4 phase shifter is used. The crossed-dipoles are placed at almost λ/4 elevation on the…

115

Abstract

Purpose

To achieve right-hand circular polarization (RHCP), a 3-dB Wilkinson power divider with a λ/4 phase shifter is used. The crossed-dipoles are placed at almost λ/4 elevation on the ground plane and connected to two coaxial cables. Experiments show that the impedance bandwidth of 49.40% (913.7–1,513.1 MHz) and axial ratio bandwidth (ARBW) of 22.88% (1,145.8–1,441.8 MHz) are achieved.

Design/methodology/approach

In this study, a wideband crossed-dipole antenna with circularly polarized (CP) radiation for L-band satellite and radar applications is presented. The proposed CP antenna comprises two orthogonally placed printed dipoles, a quadrature coupler and a box-shaped ground plane.

Findings

Furthermore, by fixing the box-shaped ground plane under the radiators, 5.13 dBic RHCP peak gain at 1,300 MHz and maximum half-power beamwidth (HPBW) of 84.5° at 1,170 MHz are realized for the antenna.

Originality/value

Eight metallic walls are connected to four corners of the substrate to stabilize the radiation properties in this study. Results show that the ARBW and front-to-back ratio are improved and the maximum HPBW around 127° across the operating frequency band is achieved. The proposed CP antenna is a good candidate for Global Positioning System (GPS) L2 (1.227 GHz), GPS L5 (1.176 GHz) and air route surveillance radar system at 1,215–1,390 MHz frequency band.

Details

Circuit World, vol. 48 no. 4
Type: Research Article
ISSN: 0305-6120

Keywords

Access Restricted. View access options
Article
Publication date: 20 September 2019

Payam Beigi, Yashar Zehforoosh, Mirhamed Rezvani and Javad Nourinia

This paper aims to present a new triangular crinkle-shaped multiband antenna for multiband operation.

91

Abstract

Purpose

This paper aims to present a new triangular crinkle-shaped multiband antenna for multiband operation.

Design/methodology/approach

This paper refers to increasing the number of resonance frequency by appending triangular crinkle. Experimental frequency results of the presented antenna are 1.60/2.80/4.00/5.80/7.12/8.32/10.06 GHz.

Findings

The triangular shaped antenna is manufactured on a low-priced FR-4 substrate with small size and tested. The reported antenna with full size 14 × 14 mm2 with a half elliptical ground sheet on the bottom plane of the substrate and a triangular crinkle strip patch in the front of the substrate. The reported antenna has dual polarized, by rectangular slits on the ground sheet can produce the CP radiation on ITU band. The radiation characteristics indicate the mentioned antenna plays good task for multiband structures. Simulation and measured consequences are in desirable agreement and refer to agreeable operation for the introduced antenna.

Originality/value

Also, an evaluation is done based on multiple attribute decision-making method for comparison the proposed monopole antenna with some previously presented multiband monopole antennas.

1 – 2 of 2
Per page
102050