Search results

The purpose of this paper is to deal with the three-dimensional analysis of free vibrations in a stress-free and rigidly fixed homogeneous transversely isotropic hollow cylinder in the context of three-phase-lag (TPL) model of hyperbolic thermoelasticity.

The matrix Frobenius method of extended power series is employed to obtain the solution of coupled ordinary differential equations along the radial coordinate.

The natural frequency, dissipation factor and inverse quality factor in the stress-free and rigidly fixed hollow cylinder get significantly affected due to thermal vibrations and thermo-mechanical coupling.

The modified Bessel functions and matrix Frobenius method have been directly used to study the vibration model of a homogeneous, transversely isotropic hollow cylinder in the context of TPL model based on three-dimensional thermoelasticity.

The purpose of this paper is to study the propagation of inhomogeneous waves in a partially saturated poro-thermoelastic media through the examples of the free surface of such media..

The mathematical model evolved by Zhou et al. (2019) is solved through the Helmholtz decomposition theorem. The propagation velocities of bulk waves in partially saturated poro-thermoelastic media are derived by using the potential functions. The phase velocities and attenuation coefficients are expressed in terms of inhomogeneity angle. Reflection characteristics (phase shift, loci of vertical slowness, amplitude, energy) of elastic waves are investigated at the stress-free thermally insulated boundary of a considered medium. The boundary can be permeable or impermeable. The incident wave is portrayed with both attenuation and propagation directions (i.e. inhomogeneous wave). Numerical computations are executed by using MATLAB.

In this medium, the permanence of five inhomogeneous waves is found. Incidence of the inhomogeneous wave at the thermally insulated stress-free surface results in five reflected inhomogeneous waves in a partially saturated poro-thermoelastic media. The reflection coefficients and splitting of incident energy are obtained as a function of propagation direction, inhomogeneity angle, wave frequency and numerous thermophysical features of the partially saturated poro-thermoelastic media. The energy of distinct waves (incident wave, reflected waves) accompanying interference energies between distinct pairs of waves have been exhibited in the form of an energy matrix.

The sensitivity of propagation characteristics (velocity, attenuation, phase shift, loci of vertical slowness, energy) to numerous aspects of the physical model is analyzed graphically through a particular numerical example. The balance of energy is substantiated by virtue of the interaction energies at the thermally insulated stress-free surface (opened/sealed pores) of unsaturated poro-thermoelastic media through the bulk waves energy shares and interaction energy.

The purpose of this paper is to present a model to analyze free vibrations in a transradially isotropic, thermoelastic hollow sphere subjected to stress free, thermally insulated or stress free, isothermal and rigidly fixed, thermally insulated or rigidly fixed, isothermal boundary conditions.

The potential functions along with spherical wave solution have been used to reduce the system of governing partial differential equations to a coupled system of ordinary differential equations in radial coordinates after employing non-dimensional quantities. Matrix Frobenius method of extended power series has been employed to obtain accurate solution of coupled differential equations in terms of radial coordinates. The mathematical model of the considered problem has been solved analytically to obtain the characteristics equations after imposing the appropriate boundary conditions at the outer and inner surfaces of the hollow sphere. The characteristic equations which govern various types of vibration modes expected to exist have been derived in the compact form. The special cases of spheroidal and toroidal modes of vibrations have been deduced from the characteristic equations and discussed.

The toroidal mode has been found to be independent of temperature change. The magnitude of lowest frequency and damping factor are significantly affected in the presence of thermal field and increase with an increase in the spherical harmonics in addition to geometry of the structure.

The matrix Frobenius method has been used to develop analytical solutions and functional iteration technique to carry out numerical simulations of such structures for the first time. The simulated results are presented graphically and compared with the available literature.

The purpose of this manuscript is to study the vibration characteristics of the spherically symmetric solid and hollow spheres poised of a homogeneous thermoelastic material, based on the three dimensional coupled thermoelasticity.

In this paper, matrix Fröbenius series solution is used to derive the frequency equations, for the field functions. Results have been applied on rigidly fixed boundary conditions.

The main finding of this paper is that the frequency of vibration of spherically symmetric sphere (structure is independent of theta and phi) increases with the increase of radius, for solid spheres and for hollow spheres with thickness to mean radius ratio. Deformation in the given materials increases with thickness to mean radius ratio of the hollow sphere.

A numerical simulation has been done with the help of functional iteration method for solid and hollow thermoelastic spheres made of zinc and poly methyl meth acrylate materials for different boundary conditions. The computer simulated results in contempt of frequency, damping of vibration modes and displacement have been obtained graphically and compared with the existed results.

The purpose of this paper is to analyze the free vibrations in a stress free and thermally insulated (or isothermal), homogeneous, transversely isotropic, solid cylinder based on three‐dimensional coupled thermoelasticity, which is initially undeformed and kept at uniform temperature.

The displacement potential functions have been introduced in the equations of motion and heat conduction in order to decouple the purely shear and longitudinal motions. The system of governing partial differential equations is reduced to four second‐order coupled ordinary differential equations in radial coordinate by using the method of separation of variables. The matrix Frobenius method of extended power series is employed to obtain the solution of coupled ordinary differential equations along the radial coordinate. The convergence analysis of matrix Frobenius method has been successfully carried out.

The purely transverse mode is found to be independent of the rest of the motion and temperature change. The natural frequency, dissipation factor, inverse quality factor and frequency shift of vibrations in a stress free solid cylinder get significantly affected due to thermal variations and thermo‐mechanical coupling.

A new procedure is used and compared to other methods available in the literature.

The purpose of this paper is to study the analytical solutions of transversely isotropic thermo-piezoelectric interactions in a polygonal cross-sectional fiber immersed in fluid using the Fourier expansion collocation method.

A mathematical model is developed for the analytical study on a transversely isotropic thermo-piezoelectric polygonal cross-sectional fiber immersed in fluid using a linear form of three-dimensional piezothermoelasticity theories. After developing the formal solution of the mathematical model consisting of partial differential equations, the frequency equations have been analyzed numerically by using the Fourier expansion collocation method (FECM) at the irregular boundary surfaces of the polygonal cross-sectional fiber. The roots of the frequency equation are obtained by using the secant method, applicable for complex roots.

From the literature survey, it is evident that the analytical formulation of thermo-piezoelectric interactions in a polygonal cross-sectional fiber contact with fluid is not discussed by any researchers. Also, in this study, a polygonal cross-section is used instead of the traditional circular cross-sections. So, the analytical solutions of transversely isotropic thermo-piezoelectric interactions in a polygonal cross-sectional fiber immersed in fluid are studied using the FECM. The dispersion curves for non-dimensional frequency, phase velocity and attenuation coefficient are presented graphically for lead zirconate titanate (PZT-5A) material. The present analytical method obtained by the FECM is compared with the finite element method which shows a good agreement with present study.

This paper contributes the analytical model to find the solution of transversely isotropic thermo-piezoelectric interactions in a polygonal cross-sectional fiber immersed in fluid. The dispersion curves of the non-dimensional frequency, phase velocity and attenuation coefficient are more prominent in flexural modes. Also, the surrounding fluid on the various considered wave characteristics is more significant and dispersive in the hexagonal cross-sections. The aspect ratio (a/b) of polygonal cross-sections is critical to industry or other fields which require more flexibility in design of materials with arbitrary cross-sections.

The purpose of the study is to analytically as well as numerically investigate the weight of throughflow on the onset of Casson nanofluid layer in a permeable matrix. This study examines both the marginal and over stable kind of convective movement in the system.

A double-phase model is used for Casson nanofluid, which integrates the impacts of thermophoresis and Brownian wave, whereas for flow in the porous matrix the altered Darcy model is occupied under the statement that nanoparticle flux is disappear on the boundaries. The resultant eigenvalue problem is resolved analytically as well as numerically with the help of Galerkin process with the Casson nanofluid Rayleigh–Darcy number as the eigenvalue.

The findings revealed that the throughflow factor postpones the arrival of convective flow and reduces the extent of convective cells, whereas the Casson factor, the Casson nanoparticle Rayleigh–Darcy number and the reformed diffusivity ratio promote convective motion and also decrease the extent of convective cells.

Controlling the convective movement in heat transfer systems that generate high heat flux is a real mechanical challenge. The proposed framework proved that the use of throughflow is one of the most important ways to control the convective movement in Casson nanofluid. To the best of the authors’ knowledge, no inspection has been established in the literature that studies the outcome of throughflow on the Casson nanofluid convective flow in a porous medium layer. However, the convective flow of Casson nanofluid finds many applications in improving heat transmission and energy efficiency in a range of thermal systems, such as the cooling of heat-generating elements in electronic devices, heat exchangers, pharmaceutical practices and hybrid-powered engines, where throughflow can play a significant role in controlling the convective motion.

An electrorheological (ER) fluid consists of dielectric particles blended in a nonconducting oil. ER lubricants are often considered smart lubricants. This paper aims to examine the steady state and dynamic response of multilobe journal bearings using an ER lubricant.

Reynold’s equation has been used to describe the lubricant flow in the journal-bearing clearance space. The Bingham model is used to characterize the nonlinear behavior of the lubricant. The solution of the Reynolds equation is obtained using the Newton–Raphson method, with gaseous cavitation in the fluid film numerically addressed by applying a mass-conserving algorithm. The effects of lobe geometry and the applied electric field are investigated on film pressure profile, fluid film thickness, direct stiffness and damping parameters. The equation of motion for journal center coordinates is solved using the fourth-order Runge–Kutta method, to predict journal center motion trajectories.

Using ER lubricant combined with two-lobe journal bearing significantly improved the minimum film thickness by 49.75%, the direct stiffness parameter by 132.18% and the damping parameter by 206.3%. However, the multilobe configuration was found to negatively impact the frictional powerloss of the bearing system. In the case of multilobe configurations of journal bearings using ER lubricant, linear motion journal trajectories are observed to be reduced and exhibit increased stability.

This study presents the effect of an ER lubricant and multilobe configuration on the rotor-dynamic performance and stability analysis of hydrodynamic journal bearings.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-06-2024-0201/

The purpose of this paper is to study the effect of rotation and gravity on a homogeneous, isotropic, and generalized thermo-viscoelastic material with voids. The problem is studied in the context of the coupled theory, Lord-Shulman theory with one relaxation time, and Green-Lindsay theory with two relaxation times.

The analytical method used was the normal mode analysis technique.

Numerical results for the physical quantities were analyzed and presented graphically. The graphical results indicated that the effects of rotation and gravity were observable physical effects on the thermo-viscoelastic material with voids. Comparisons were made between the results obtained in the absence and presence of rotation and gravity.

In the present work, the authors investigated the effect of rotation and gravity on thermo-viscoelastic medium with voids. Comparisons were also made between the three theories in the absence and the presence of rotation and gravity. Such problems are very important in many dynamical systems.

This chapter contributes to the ongoing debate about how digitalisation affects the internationalisation of small- and medium-sized firms (SMEs). By applying the Uppsala Internationalisation Process model, this chapter examines the impact of e-commerce on the internationalisation of SMEs. The study uses a unique dataset, which includes 14,513 SMEs across several sectors in 34 countries. The results show that firms using the Internet as a means to provide information about the firm exhibit a higher degree of internationalisation, while using the Internet to facilitate transactions was found to have a positive impact on the ratio of foreign sales to the total sales; however, these foreign sales are likely to be concentrated in less regions/markets. Furthermore, perceived export barriers were found to be a significant moderator of the effects of e-commerce usage on international intensity and international diversification. This suggests that e-commerce does not automatically facilitate the internationalisation of SMEs.