Search results

Outlines research work on the control of flexible single‐link robot arms in which the link is modelled as a beam and the end‐point position is controlled by measuring that position and using that measurement as a basis for applying a torque to the link joint. A position sensor device [PSD] is used as the measuring device. Describes how the measurement is taken and explains the measurement circuit and how the links are analyzed. Concludes that the simplicity of the general configuration of the photosensor system and the nature of the direct data obtained allows it to be used in a wide range of applications.

This work presents a robot prototype designed and built for a new aided fruit‐harvesting strategy in highly unstructured environments, involving human‐machine task distribution. The operator drives the robotic harvester and performs the detection of fruits by means of a laser range‐finder, the computer performs the precise location of the fruits, computes adequate picking sequences and controls the motion of all the mechanical components (picking arm and gripper‐cutter). Throughout this work, the specific design of every module of the robotized fruit harvester is presented. The harvester has been built and laboratory tests with artificial trees were conducted to check range‐finder’s localization accuracy and dependence on external conditions, harvesting arm’s velocity, positioning accuracy and repeatability; and gripper‐cutter performance. Results show excellent range‐finder and harvesting arm operation, while a bottleneck is detected in gripper‐cutter performance. Some figures showing overall performance are given.

The purpose of this paper is to propose a variable impedance control method of finger exoskeleton for hand rehabilitation using the contact forces between the finger and the exoskeleton, making the output trajectory of finger exoskeleton comply with the natural flexion-extension (NFE) trajectory accurately and adaptively.

This paper presents a variable impedance control method based on fuzzy neural network (FNN). The impedance control system sets the contact forces and joint angles collected by sensors as input. Then it uses the offline-trained FNN system to acquire the impedance parameters in real time, thus realizing tracking the NFE trajectory. K-means clustering method is applied to construct FNN, which can obtain the number of fuzzy rules automatically.

The results of simulations and experiments both show that the finger exoskeleton has an accurate output trajectory and an adaptive performance on three subjects with different physiological parameters. The variable impedance control system can drive the finger exoskeleton to comply with the NFE trajectory accurately and adaptively using the continuously changing contact forces.

The finger is regarded as a part of the control system to get the contact forces between finger and exoskeleton, and the impedance parameters can be updated in real time to make the output trajectory comply with the NFE trajectory accurately and adaptively during the rehabilitation.

The Group of Unmanned Assistant Robots Deployed in Aggregative Navigation by Scent (GUARDIANS) multi‐robot team is to be deployed in a large warehouse in smoke. The team is to assist firefighters search the warehouse in the event or danger of a fire. The large dimensions of the environment together with development of smoke which drastically reduces visibility, represent major challenges for search and rescue operations. The GUARDIANS robots act alongside a firefighter and guide and accompany the firefighters on the site while indicating possible obstacles and the locations of danger and maintain communications links. The purpose of this paper is to focus on basic navigation behaviours of multi‐robot or human‐robot teams, which have to be achieved without central and on‐line control in both categories of GUARDIANS robots' tasks.

In order to fulfill the aforementioned tasks, the robots need to be able to perform certain behaviours. Among the basic behaviours are capabilities to stay together as a group, that is, generate a formation and navigate while keeping this formation. The control model used to generate these behaviours is based on the so‐called social potential field framework, which the authors adapt to the specific tasks required for the GUARDIANS scenario. All tasks can be achieved without central control, and some of the behaviours can be performed without explicit communication between the robots.

The GUARDIANS environment requires flexible formations of the robot team: the formation has to adapt itself to the circumstances. Thus, the application has forced the concept of a formation to be re‐defined. Using the graph‐theoretic terminology, it can be said that a formation may be stretched out as a path or be compact as a star or wheel. The developed behaviours have been implemented in simulation environments as well as on real ERA‐MOBI robots commonly referred to as Erratics. Advantages and shortcomings of the model, based on the simulations as well as on the implementation with a team of Erratics are discussed.

This paper discusses the concept of a robot formation in the context of a real world application of a robot team (Swarm).

The purpose of this paper is to understand different preferences and important design factors for wearable soft robots (WSR) and understand how these differences affect people’s perception, attitude and behavioral intentions toward using the WSR.

An online survey was conducted to purposely sampled participants who are adults aged over 18 of both genders with movement disabilities living in the USA. The collected data were analyzed through Welch’s t-test, Welch’s analysis of variance and linear- and multi-regressions for quantitative data and major theme extractions for qualitative data.

The results identified preferred functions and designs and important design factors for WSR and how these influence to users’ perception, attitude and behaviors on WSR.

The number of people with movement disabilities is anticipated to increase worldwide and it is essential to understand users for developing wearable movement aids for people with movement disabilities. However, there is no research on what functions and designs are preferred by WSR users and what aspects designers need to consider when developing these WSR. Thus, this research will contribute to the body of knowledge in WSR design; help WSR developers, designers and researchers better incorporate users’ preferences in the design process; and ultimately enhance the quality of life of people who have movement disabilities.

Underactuated fingers are adapted to generate several grasping modes for different tasks, and coupled fingers and self-adaptive fingers are two important types of them. Aiming to expand the application and increase adaptability of robotic hand, this paper aims to propose a novel grasping model, called coupled and indirectly self-adaptive (CISA) grasping model, which is the combination of coupled finger and indirectly self-adaptive finger.

CISA grasping process includes two stages: first, coupled and then indirectly self-adaptive grasping; thus, it is not only integrated with the good pinching ability of coupled finger but also characterized with the high flexibility of indirectly self-adaptive finger. Furthermore, a CISA hand with linkage-slider, called CISA-LS hand, is designed based on the CISA grasping model, consisting of 1 palm, 5 CISA-LS fingers and 14 degrees of freedom.

To research the grasping behavior of CISA-LS hand, kinematic analysis, dynamic analysis and force analysis of 2-joint CISA-LS finger are performed. Results of grasping experiments for different objects demonstrate the high reliability and stability of CISA-LS hand.

CISA fingers integrate two grasping modes, coupled grasping and indirectly self-adaptive grasping, into one finger. And a double-linkage-slider mechanism is designed as the switch device.

Recognizing construction workers' activities is critical for on-site performance and safety management. Thus, this study presents the potential of automatically recognizing construction workers' actions from activations of the erector spinae muscles.

A lab study was conducted wherein the participants (n = 10) performed rebar task, which involved placing and tying subtasks, with and without a wearable robot (exoskeleton). Trunk muscle activations for both conditions were trained with nine well-established supervised machine learning algorithms. Hold-out validation was carried out, and the performance of the models was evaluated using accuracy, precision, recall and F1 score.

Results indicate that classification models performed well for both experimental conditions with support vector machine, achieving the highest accuracy of 83.8% for the “exoskeleton” condition and 74.1% for the “without exoskeleton” condition.

The study paves the way for the development of smart wearable robotic technology which can augment itself based on the tasks performed by the construction workers.

This study contributes to the research on construction workers' action recognition using trunk muscle activity. Most of the human actions are largely performed with hands, and the advancements in ergonomic research have provided evidence for relationship between trunk muscles and the movements of hands. This relationship has not been explored for action recognition of construction workers, which is a gap in literature that this study attempts to address.

Wireless sensor networks (WSN), as a solution for buried water pipe monitoring, face a new set of challenges compared to traditional application for above-ground infrastructure monitoring. One of the main challenges for underground WSN deployment is the limited range (less than 3 m) at which reliable wireless underground communication can be achieved using radio signal propagation through the soil. To overcome this challenge, the purpose of this paper is to investigate a new approach for wireless underground communication using acoustic signal propagation along a buried water pipe.

An acoustic communication system was developed based on the requirements of low cost (tens of pounds at most), low power supply capacity (in the order of 1 W-h) and miniature (centimetre scale) size for a wireless communication node. The developed system was further tested along a buried steel pipe in poorly graded SAND and a buried medium density polyethylene (MDPE) pipe in well graded SAND.

With predicted acoustic attenuation of 1.3 dB/m and 2.1 dB/m along the buried steel and MDPE pipes, respectively, reliable acoustic communication is possible up to 17 m for the buried steel pipe and 11 m for the buried MDPE pipe.

Although an important first step, more research is needed to validate the acoustic communication system along a wider water distribution pipe network.

This paper shows the possibility of achieving reliable wireless underground communication along a buried water pipe (especially non-metallic material ones) using low-frequency acoustic propagation along the pipe wall.

Supernumerary robotic limbs (SRLs) are a new type of wearable robot, which improve the user’s operating and perceive the user’s environment by extra robotic limbs. There are some literature reviews about the SRLs’ key technology and development trend, but the design of SRLs has not been fully discussed and summarized. This paper aims to focus on the design of SRLs and provides a comprehensive review of the ontological structure design of SRLs.

In this paper, the related literature of SRLs is summarized and analyzed by VOSviewer. The structural features of different types of SRLs are extracted, and then discuss the design approach and characteristics of SRLs which are different from typical wearable robots.

The design concept of SRLs is different from the conventional wearable robots. SRLs have various reconfiguration and installed positions, and it will influence the safety and cooperativeness performance of SRLs.

This paper focuses on discussing the structural design of SRLs by literature review, and this review will help researchers understand the structural features of SRLs and key points of the ontological design of SRLs, which can be used as a reference for designing SRLs.

Generally, humanoid robots usually suffer significant impact force when walking or running in a non-predefined environment that could easily damage the actuators due to high stiffness. In recent years, the utilization of passive compliant series elastic actuators (SEA) for driving humanoid's joints has proved the capability in many aspects so far. However, despite being widely applied in the biped robot research field, the stable control problem for a humanoid powered by the SEAs, especially in the walking process, is still a challenge. This paper proposes a model reference adaptive control (MRAC) combined with the back-stepping algorithm to deal with the parameter uncertainties in a humanoid's lower limb driven by the SEA system. This is an extension of our previous research (Lanh et al., 2021).

Firstly, a dynamic model of SEA is obtained. Secondly, since there are unknown and uncertain parameters in the SEA model, a Model Reference Adaptive Controller (MRAC) is employed to guarantee the robust performance of the humanoid's lower limb. Finally, an experiment is carried out to evaluate the effectiveness of the proposed controller and the SEA mechanism.

This paper proposes an effective control algorithm that can be widely applied for the humanoid-SEA system. Besides, the effect of the coefficients in the control law is analyzed to further improve the response's quality.

Even though the simulation shows good results with stable system response, the practical experiment has not been implemented to fully evaluate the quality of the controller.

The MRAC is applied to control the humanoid's lower limb and the back-stepping process is utilized to combine with an external SEA system but still maintain stabilization. The simplified model of the lower-limb system proposed in the paper is proven to be appropriate and can be taken for further research in the future.