Search results

Gives a bibliographical review of the finite element methods (FEMs) applied for the linear and nonlinear, static and dynamic analyses of basic structural elements from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore aims to give the reader an encyclopaedic view on the subject. The bibliography at the end of the paper contains 2,025 references to papers, conference proceedings and theses/dissertations dealing with the analysis of beams, columns, rods, bars, cables, discs, blades, shafts, membranes, plates and shells that were published in 1992‐1995.

This study applies asymmetric rather than conventional symmetric analysis to advance theory in occupational psychology. The study applies systematic case-based analyses to model complex relations among conditions (i.e., configurations of high and low scores for variables) in terms of set memberships of managers. The study uses Boolean algebra to identify configurations (i.e., recipes) reflecting complex conditions sufficient for the occurrence of outcomes of interest (e.g., high versus low financial job stress, job strain, and job satisfaction). The study applies complexity theory tenets to offer a nuanced perspective concerning the occurrence of contrarian cases – for example, in identifying different cases (e.g., managers) with high membership scores in a variable (e.g., core self-evaluation) who have low job satisfaction scores and when different cases with low membership scores in the same variable have high job satisfaction. In a large-scale empirical study of managers (n = 928) in four (contextual) segments of the farm industry in New Zealand, this study tests the fit and predictive validities of set membership configurations for simple and complex antecedent conditions that indicate high/low core self-evaluations, job stress, and high/low job satisfaction. The findings support the conclusion that complexity theory in combination with configural analysis offers useful insights for explaining nuances in the causes and outcomes to high stress as well as low stress among farm managers. Some findings support and some are contrary to symmetric relationship findings (i.e., highly significant correlations that support main effect hypotheses).

A review is made of methods for calculating parameters characterizing crack tip behaviour in non‐linear materials. Convenient methods of calculating J‐integral type quantities are reviewed, classified broadly into two groups, as domain integrals and virtual crack extension techniques. In addition to considerations of how such quantities may be calculated by finite elements, assessment methods of conducting the actual incremental analyses are described.

This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming and powder metallurgy are briefly discussed. The range of applications of finite elements on the subjects is extremely wide and cannot be presented in a single paper; therefore the aim of the paper is to give FE users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An appendix included at the end of the paper presents a bibliography on finite element applications in material processing for the last five years, and more than 1100 references are listed.

This article seeks to apply the challenge–hindrance conceptualization of demands to a model that relates stressors to emotional exhaustion and job satisfaction. Supervisory support, a resource, is posited as a precursor to demands, and work–family conflict (WFC) and interpersonal conflict (IPC) at work are expected to mediate the demand–strain and job satisfaction relationships.

This cross‐sectional self‐report survey included a sample of 600 government employees in Canada.

In addition to directly influencing job satisfaction, supervisory support reduces strain and increases motivation by decreasing hindrances and interpersonal conflict. Also, although, challenge and hindrance demands are both positively associated with strain, task complexity is positively associated with job satisfaction, whereas role ambiguity and interpersonal conflict are negatively associated with job satisfaction. Furthermore, work–family conflict and interpersonal conflict fully mediate the effects of supervisory support, role conflict, and task complexity on strain, and they reduce the effects of ambiguity on strain. Thus, these factors have limited effects on strain by themselves; rather, they act on strain through emotional demands.

Some challenges have a strong connection with resources, yet also induce strain. Future models should incorporate the challenge‐hindrance approach to classifying demands and should examine challenge demands that motivate people to engage in stressful activities. Also, although work‐family conflict and interpersonal conflict at work concern different spheres, future research should incorporate both spheres and employ emotional demands as mediating variables.

Given that some challenges can be motivating yet stressful, the consequences of interventions can be difficult to forecast. Results point to the importance of carefully designing interventions and the role of WFC and IPC as potential levers in managing strain arising from complex jobs and other types of challenges.

This paper considers a unique model of demands, resources, and outcome variables that contributes to the knowledge about how to address stress.

This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming, powder metallurgy and composite material processing are briefly discussed. The range of applications of finite elements on these subjects is extremely wide and cannot be presented in a single paper; therefore the aim of the paper is to give FE researchers/users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An appendix included at the end of the paper presents a bibliography on finite element applications in material processing for 1994‐1996, where 1,370 references are listed. This bibliography is an updating of the paper written by Brannberg and Mackerle which has been published in Engineering Computations, Vol. 11 No. 5, 1994, pp. 413‐55.

This work addresses the computational aspects of a model for elastoplastic damage at finite strains. The model is a modification of a previously established model for large strain elastoplasticity described by Perić et al. which is here extended to include isotropic damage and kinematic hardening. Within the computational scheme, the constitutive equations are numerically integrated by an algorithm based on operator split methodology (elastic predictor—plastic corrector). The Newton—Raphson method is used to solve the discretized evolution equations in the plastic corrector stage. A numerical assessment of accuracy and stability of the integration algorithm is carried out based on iso‐error maps. To improve the stability of the local N—R scheme, the standard elastic predictor is replaced by improvedinitial estimates ensuring convergence for large increments. Several possibilities are explored and their effect on the stability of the N—R scheme is investigated. The finite element method is used in the approximation of the incremental equilibrium problem and the resulting equations are solved by the standard Newton—Raphson procedure. Two numerical examples are presented. The results are compared with those obtained by the original elastoplastic model.

The purpose of this paper is to present a methodology to assess material damage parameters for ductile crack initiation and growth ahead of a crack/notch tip in high hardening steel like AISI type 316L(N) stainless steel.

Ductile damage parameter and far field J-integral have been obtained from standard FEM analysis for a crack/notch tip undergoing large plastic deformation and resulting in crack initiation/growth. In conjunction with experimental results, the damage variable for low strength and high hardening material has been derived in terms of continuum parameters: equivalent plastic strain (ε_eq) and stress triaxiality (φ). The material parameters for damage initiation and growth in 316LN SS have been evaluated from tensile and fracture tests. With these material tensile/fracture parameters as input, elastic-plastic eXtended Finite Element Method (X-FEM) simulations were carried out on compact tension (CT) specimen geometry under varying initial stress triaxiality conditions.

The material parameters for damage initiation and growth have been assessed and calibrated by comparing the X-FEM predicted load-displacement responses with the experimental results. It is observed that the deviations in the predicted load values from the experimental data are within 6 percent for specimens with a/W=0.39, 0.55, 0.64, while for a/W=0.72, it is 17 percent.

The present study is a part of developing methods to obtain calibrated material damage parameters for crack growth simulation of components made of AISI 316L(N) stainless steel. This steel is used for fast breeder reactor-based power plant being built at Kalpakkam, India.

Crack tip stresses are used to relate the ability of structures to perform under the influence of cracks and defects. One of the methods to determine three-dimensional crack tip stresses is through the J-T_z method. The J-T_z method has been used extensively to characterize the stresses of cracked geometries that demonstrate positive T-stress but limited in characterizing negative T-stresses. The purpose of this paper is to apply the J-T_z method to characterize a three-dimensional crack tip stress field in a changing crack length from positive to negative T-stress geometries.

Elastic-plastic crack border fields of deep and shallow cracks in tension and bending loads were investigated through a series of three-dimensional finite element (FE) and analytical J-T_z solutions for a range of crack lengths ranging from 0.1⩽a/W⩽0.5 for two thickness extremes of B/(W − a)=1 and 0.05.

Both the FE and the J-T_z approaches showed that the combined in-plane and the out-of-plane constraint loss were differently affected by the T-stress and the out-of-plane size effects when the crack length changed from deep to shallow cracks. The conditions of the J-T_z dominance on the three-dimensional crack front tip were shown to be limited to positive T-stress geometries, and the J-T_z-Q^2D approach can extend the crack border dominance of the three-dimensional deep and shallow bend models along the crack front tip until perturbed by an elastic-plastic corner field.

The paper reports the limitation of the J-T_z approach, which is used to calculate the state of three-dimensional crack tip stresses in power law hardening materials. The results from this paper suggest that the characterization of the three-dimensional crack tip stress in power law hardening materials is still an open issue and requires other suitable solutions to solve the problem.

This paper demonstrates a thorough analysis of a three-dimensional elastic-plastic crack tip fields for geometries that are initially either fully constrained (positive T-stress) or unconstrained (negative T-stress) crack tip fields but, subsequently, the T-stress sign changes due to crack length reduction and specimen thickness increase. The J-T_z stress-based method has been tested and its dominance over the crack tip field is shown to be affected by the combined in-plane and the out-of-plane constraints and the corner field effects.

This bibliography is offered as a practical guide to published papers, conference proceedings papers and theses/dissertations on the finite element (FE) and boundary element (BE) applications in different fields of biomechanics between 1976 and 1991. The aim of this paper is to help the users of FE and BE techniques to get better value from a large collection of papers on the subjects. Categories in biomechanics included in this survey are: orthopaedic mechanics, dental mechanics, cardiovascular mechanics, soft tissue mechanics, biological flow, impact injury, and other fields of applications. More than 900 references are listed.