Search results

The purpose of this paper is to analyse the influence of various firing profiles on microstructural and dielectric properties of low-temperature, co-fired ceramic (LTCC) substrates in a GHz frequency range. According these analyses, sintering process can be controlled and modified to achieve better performance of devices fabricated from LTCC substrates.

Samples from LTCC substrates GreenTape 951 and GreenTape 9K7 were sintered by four firing profiles. Basic firing profile recommended by the manufacturer was modified by increasing the peak temperature or the dwell time at the peak temperature. The influence of firing profile on microstructural properties was analysed according to measurements by X-ray diffractometer (application of the Cu K-alpha radiation and the Bragg-Brentano method), and the influence on dielectric properties (dielectric constant and dielectric losses) was analysed according to measurements by split cylinder resonator method at 9.7 and 12.5 GHz.

Rising of the peak temperature or extension of dwell time at this temperature has influence on all analysed properties of LTCC substrates. Size of crystallites can be changed by modification of firing profile as well as microdeformation. In addition, dielectric properties can be changed too by modification of the firing profile. Correlation between microdeformation and dielectric losses was observed.

The novelty of this work lies in finding the mutual relationship between changes in microstructural (size of grains and microdeformation) and dielectric properties (dielectric constant and dielectric losses) caused by different firing profiles.

The purpose of this paper is to analyse the possibilities of mechanical switch replacement by capacitive film touch sensor in applications requiring high reliability and short response time. Advantage of replacing mechanical switch by capacitive touch sensor is no mechanical wear and possible implementation of sensor in application where the switch could not be used or where the flexibility of the sensor substrate is required. The aim of this work is to develop a capacitive touch sensor with the advantage of maximum mechanical resistance, short response time and high sensitivity.

Based on various possible sensors layouts, the authors realized 18 different (14 self-capacitance and four mutual capacitance) topologies of capacitive sensor for touch applications. Three different technologies – PCB, LTCC and polymer technology – were used to characterize sensor’s behaviour. For precise characterization of different layouts realized on various substrates, the authors used integrated circuit FDC2214 capacitance-to-digital converter.

Sensing range of the capacitive touch (proximity) sensor is affected by the per cent of area covered by the sensor, and it does not depend on topology of sensor. The highest sensing range offers PCB technology. Flexible substrates can be used as proper substituent to rigid PCB.

The novelty of this work lies in finding the touch capacitive sensors that allow shorter switching times compared to standard mechanical switches.

The purpose of this paper is to introduce modified in–phase and quadrature components (I–Q) demodulator based on low temperature co-fired ceramics (LTCC) dielectric substrate GreenTape 951PX for M-Sequence ultra-wide band (UWB) sensor system.

Microstrip low pass (LP) and band pass (BP) filters for UWB sensor systems with required properties (for both filters, minimum attenuation is −40dB in stopband, bandwidth of pass band is 6 to 8.5 GHz for BP filter and cutoff frequency is 2.5 GHz for LP filter) were designed, simulated, fabricated and measured using dielectric substrates Du Pont GreenTape 951 PX. The developed microstrip filters were integrated with all parts of I–Q demodulator on one multilayer structure based on LTCC substrate Du Pont GreenTape 951 PX.

Both type of microstrip filters integrated in the I– Q demodulator achieved better transmission characteristics in comparison with commercial available filters. It was shown that LTCC technology based on GreenTape 951PX proves good stability in gigahertz frequency and suitability for fabrication of I–Q demodulator with a multilayer approach.

The novelty of this work lies in substituting commercially available LP and BP filters used in I– Q demodulator by microstrip LP and BP filters with better performance and furthermore the I– Q demodulator is fabricated based on LTCC instead of previously used PCB.

The purpose of this paper is to create multilayer substrate (composite) from various low temperature co-fired ceramic (LTCC) substrates by their mutual combinations and to analyse influence of these multilayer substrates on dielectric properties in GHz frequency range.

GreenTape 951, GreenTape 9K7 and Murata LFC were used to create compound multilayer substrates that include three layers: middle layer is from Murata LFC, and both upper and bottom layers are either from GreenTape 951 or GreenTape 9K7. Shrinkage in all x-, y- and z-axes of all substrates including multilayer substrates were analysed, and influence of different shrinkage on dielectric properties was examined by microstrip ring resonators applied on all mentioned of substrates.

The middle layer of Murata LFC has significant influence on shrinkage value of composites which has a good repeatability and minimalizes problems with design of multilayer LTCC devices. Impact of middle layer from Murata LFC on dielectric constant is not significant, but on the other hand Q factor (loss tangent) of these composites is increased according to inhomogeneity between single LTCC layers, especially at frequency around 6 GHz.

The novelty of this work lies in creating multilayers systems from different types of LTCC substrates to find combination with the most suitable physical and dielectric properties for various purposes in GHz range applications.

The purpose of this paper is to consider the adequacy of various microstrip filters’ behaviour based on different low-temperature co-fired ceramic (LTCC) dielectrics in the high frequency (HF) area up to 13 GHz.

Low pass, band pass and band stop filters for ultra-wideband radar systems were designed, simulated, fabricated and measured using three various dielectric substrates: Dupont GreenTape 951, Dupont GreenTape 9K7 and Murata LFC.

It is not possible to unambiguously determine the most suitable LTCC dielectric for these filter design because, in general, all designed filters fulfilled requirements (attenuation, cut off frequencies) with minimal divergences, but temperature-stable dielectric and physical properties of Murata LFC make them a promising ceramic for HF application (repeatability of realised experiments).

The novelty of this work lies in unconventional usage of LTCC as material with defined dielectric properties proper for HF applications.