Search results

The authors provide a comprehensive empirical examination on the impact of earnings quality on stock price crash risk in China.

The authors acknowledge and distinguish two-dimensional proxies for earnings quality – accounting-based (earnings management degree) and market-based (earnings transparency) known in accounting and finance literature.

The authors find that both generally indicate that better earnings quality is associated with less crashes. However, extremely high earnings transparency interacted with insider trading profit can also actually exacerbate stock price crashes.

This study is the first to highlight the pertinence of accounting-based measures to proxy for earnings quality in a fast-growing emerging market environment such as China.

In a dual-robot system, the relative position error is a superposition of errors from each mono-robot, resulting in deteriorated coordination accuracy. This study aims to enhance relative accuracy of the dual-robot system through direct compensation of relative errors. To achieve this, a novel calibration-driven transfer learning method is proposed for relative error prediction in dual-robot systems.

A novel local product of exponential (POE) model with minimal parameters is proposed for error modeling. And a two-step method is presented to identify both geometric and nongeometric parameters for the mono-robots. Using the identified parameters, two calibrated models are established and combined as one dual-robot model, generating error data between the nominal and calibrated models’ outputs. Subsequently, the calibration-driven transfer, involving pretraining a neural network with sufficient generated error data and fine-tuning with a small measured data set, is introduced, enabling knowledge transfer and thereby obtaining a high-precision relative error predictor.

Experimental validation is conducted, and the results demonstrate that the proposed method has reduced the maximum and average relative errors by 45.1% and 30.6% compared with the calibrated model, yielding the values of 0.594 mm and 0.255 mm, respectively.

First, the proposed calibration-driven transfer method innovatively adopts the calibrated model as a data generator to address the issue of real data scarcity. It achieves high-accuracy relative error prediction with only a small measured data set, significantly enhancing error compensation efficiency. Second, the proposed local POE model achieves model minimality without the need for complex redundant parameter partitioning operations, ensuring stability and robustness in parameter identification.

The purpose of this paper is to investigate how perceived supervisor support (PSS) affects employees' innovation implementation behavior (IIB), the psychological mechanisms of this relationship, and the role of perceived coworker support (PCS).

Using a three-phase survey, data were collected from 307 employees of a state-owned coal company located in the central region of China. The study tests the hypotheses by using hierarchical regression analyses. The mediating effects and the moderated mediating effects are further examined by using bias-corrected bootstrapping methods.

Affective commitment (AC) fully mediates the positive relationship between PSS and IIB, and this mediating effect can be moderated by PCS.

Companies should foster supportive supervisors and colleagues by investing in appropriate training programs. In addition, managers should emphasize the psychological changes of employees and provide more supportive feelings for them.

The study explicitly tests the entire causal chain implied by organizational support theory in predicting IIB. It specifies the different role of two similar support constructs (i.e. supervisor support and coworker support) in affecting employees' attitudes and behaviors.

The simulated temperature profile of the printed circuit board assembly (PCBA) during reflow soldering process deviates from the actual profile. To reduce this relative deviation, a new strategy based on the Kriging response surface and the Multi-Objective Genetic Algorithm (MOGA) optimizing method is proposed.

The simulated temperature profile of the PCBA during reflow soldering process deviates from the actual profile. To reduce this relative deviation, a new strategy based on the Kriging response surface and the MOGA optimizing method is proposed.

Several critical influencing parameters such as temperature and the convective heat transfer coefficient of the specific temperature zones are selected as the correction parameters. The hyper Latins sampling method is implemented to distribute the design points, and the Kriging response surface model of the soldering process is constructed. The updated model is achieved and validated by the test. The relative derivation is reduced from the initial value of 43.4%–11.8% in terms of the time above the liquidus line.

A new strategy based on the Kriging response surface and the MOGA optimizing method is proposed.

The objective of this study is to utilize empirical research and analysis to examine the coupling coordination relationship between new quality productivity and higher vocational education sustainable development.

To this end, an evaluation index system for the new quality productivity and higher vocational education sustainable development was constructed. The panel data of 30 Chinese provinces from 2016 to 2022 were then analyzed using the entropy method, the coupling coordination degree model, the Tobit regression model and Dagum’s Gini coefficient.

The findings indicate that the coupling coordination degree of new quality productivity and higher vocational education sustainable development exhibited an upward trend, though significant regional disparities were observed, with the highest coupling coordination degree recorded in the eastern region and the lowest in the northeastern region.

The study’s findings further suggest that the three factors of technological innovation level, rationalization of industrial structure and advanced industrial structure have a significant positive influence on the coupling coordination degree, while the level of government intervention has a significant negative influence on the Coupling Coordination Degree. The study posits that augmenting policy support, optimizing the government’s role, reinforcing the drive for technological innovation, and enhancing regional cooperation and exchange are imperative to foster high-quality development of the integration of industry and education between new quality productivity and higher vocational education.

Dynamic low adhesion (DLA) has become an urgent problem for the high-speed wheel-rail system because of continuous decrease of adhesion redundancy in the past decades. This article aims to provide a simulation method to reveal the mechanism of DLA under high-frequency vibrations.

A transient wheel-rail rolling contact model is developed for a typical Chinese high-speed railway system using the explicit finite element (FE) method. Instantaneous adhesion exploitation levels are studied in the time domain, for which driving cases over corrugated rails are taken as an example. A speed up to 500 km/h is considered together with different traction coefficients and corrugation dimensions. DLA is expected when the instantaneous adhesion exploitation level reaches 1.0, that is adhesion saturates and full sliding contact occurs.

The instantaneous adhesion exploitation level can be very high in the presence of corrugation, even at low traction coefficients. DLA is found to occur as great vertical unloading takes place and causes a significant increase of creepage. An approach is further developed to determine the critical depth of corrugation over which DLA occurs.

This study employs the transient wheel-rail rolling contact model to predict the instantaneous adhesion exploitation level under high-frequency vibrations. The presented results reveal a mechanism of DLA being beneficial to guidelines for future railway practice.

This paper's purpose is to suggest that manufacturers strategically place soft orders for assembly materials with suppliers in Silk Road Economic Belt countries who probably doubt the realization of the soft orders placed.

First, a two-stage Stackelberg competition is constructed, taking into account the supplier's trust level in formulating the decision process in the assembly supply chain. The authors then provide a buyback contract to coordinate the supply chain, in which the manufacturer obtains enough supplies by sharing some of the perceived risks of not fully trusted suppliers. Furthermore, the authors conduct a numerical study to investigate the influence of trust under a decentralized case and a buyback contract.

The authors found that all supply chain partners in Silk Road Economic Belt countries experience potential losses due to not fully trusting certain conditions. The study also shows that, in Silk Road Economic Belt countries, operating under a buyback contract is better than being without one in terms of assembly supply chain performance.

On the one hand, the authors only consider the asymmetry of demand information without considering that of cost structure information. On the other hand, a natural extension of the paper is to integrate single-period transactions into the multi-period transaction problem setting. As all these issues require substantial effort, the authors reserve them for future exploration.

Doing business with not-fully-trustworthy partners in Silk Road Economic Belt countries is risky, and this study reveals how trust works in global cooperation and with strategic reactions in situations of partial trust.