Search results

Electromagnetic shielding (EMS) fabrics composed of cotton, polyester and other high-polymer short-staple fibers are widely utilized in various fields. However, the inevitable pores in these fabrics lead to the leakage of electromagnetic waves, which severely diminishes the fabric’s shielding effectiveness (SE). To address this issue, this paper proposes the implantation of a metamaterial structure known as the “split ring resonator (SRR)” into the fabric.

Firstly, the types and principles of SRRs are analyzed. Through electromagnetic simulation and emulation, the effectiveness of SRRs in dissipating electromagnetic waves is confirmed. By selecting different embroidery methods, various shapes of SRRs are implanted into the fabric. Subsequently, through testing and analysis of sample fabrics embroidered with SRRs, it is concluded that implanting appropriate SRRs into pure cotton fabrics and cotton/polyester/stainless steel-blended EMS fabrics can effectively impart or enhance the SE of these fabrics.

For pure cotton fabric without inherent SE, the peak SE value can reach over 30 dB within the 6.57 GHz–7 GHz frequency band, and the minimum SE is greater than 10 dB in the 7 GHz–9.99 GHz frequency band. For the cotton/polyester/stainless steel-blended EMS fabric, the improvement in SE across all frequency bands exceeds 10 dB, averaging around 15.6 dB. The circular type SRR demonstrates the most significant improvement in fabric SE. When the substrate is composed of pure cotton or a cotton/polyester/stainless steel blend, the circular SRRs provide an average enhancement of more than 4 dB and 6 dB, respectively, than other shapes. The fewer the holes created by the implantation method, the higher the SE of the fabric after SRR implantation, with the invisible embroidery technique being the most effective. It improves the fabric’s SE by an average of about 2 dB more than flat embroidery and can be up to an average of around 6 dB higher than the backstitch embroidery technique. For every 0.2 cm increase in the size of the SRRs, the average SE increases by about 4 dB, and for every 0.5 cm increase in the spacing between them, the fabric’s SE decreases by an average of more than 2.7 dB.

This paper offers a novel approach to counteract the issue of pores reducing the SE of EMS fabrics and provides a new method for developing lightweight, thin, low-cost and high-performance EMS fabric composite materials.

This study examines the impact of corporate performance and corporate size on corporate environmental information disclosure of A-share listed enterprises in Shanghai and Shenzhen during the period 2008–2017. In this study, corporate size (size) is represented by total assets, and corporate performance (Jzc) is represented by return on net assets. Environmental information disclosure quality (EID) is measured by the Environmental Information Disclosure Index (EIDI). Non-balanced panel data models are used. In order to eliminate the influence of unobservable factors during the sample period, year fixed effects and industry fixed effects are included. The results show that corporate size and performance both promote the improvement of EID quality. Measures such as improving corporate management efficiency and setting clear environmental performance indicators can help improve corporate competitiveness and core values, thus providing important support for improving EID quality. Future research is recommended to focus on the influence of internal corporate characteristics such as corporate nature (state-owned or not), equity structure, and executive background on EID quality.

In this study, we aimed at examining the unique and interactive effects of peer violence in cyberspace on adolescents’ emotion regulation and socioemotional adjustment, as well as the mediational role of resilience in the link between adolescent’s pathogenic relational experiences and behavioral outcomes. Specifically, we intended to explore emotion differentiation and regulation in reaction to bullying perpetration and victimization and in terms of positive (proud, confident, good) and negative (ashamed, excited, guilty), Passive (sad, embarrassed, humiliated) and Reactive (angry, scared) emotions and how it impacted and predicted positive and negative outcomes.

A stratified convenient sample of 494 Italian students aged 13–19 years (M = 15.27, SD = 1.23) was selected to represent all different school types in Italy and the students were administered a self-report questionnaire on school bullying involvement. General Linear Models, ANOVA, and T-tests were employed to explore gender differences, the relationships between variables, and their contribution to the predictive model. A two-step Cluster analysis was used to profile adolescents based on patterns of resilience, health outcomes, and cyberbullying involvement.

Results showed significant gender differences, with females using internet and Facebook more than males and being more resilient, positive, and prosocial, but also responding to victimization with higher levels of alienation, anger, humiliation, and psychosomatic and emotional symptoms. Males perpetrated peer violence more than females, were less likely to be victimized, and were generally less emotionally impacted by it. Victimization rates (63.7%, n = 296) were higher than perpetration rates (51.7%, n = 233) and bully-victimization was prevalent (47.1%). Victims prevalently experienced passive emotions (sadness, humiliation, embarrassment) while perpetrators experienced negative ones (guilt and shame). Cluster analysis evidenced different pathways and trajectories of resilience and cyberbullying involvement: Resilient victims (RV), Healthy uninvolved (HU), Healthy Bullies (HB), Alienated Bully-Victims (ABV), and Resilient Bully-Victims (RBV). RV, HU, and HB resulted all well-adjusted, despite the different involvement in cyberbullying, and also RBV and despite the double involvement in cyberbullying, ABV were the only maladjusted and at-risk group in our sample characterized by very low Positivity, very low Resilience, and extremely high Alienation.

This study proposes a comprehensive, developmental, ecological, relational, and self-regulatory resilience approach to cyberbullying, which represents an innovative and advanced contribution to the literature with significant implication for research and practice. Fully understanding and measuring the emotional impact of cyber peer violence and resilience following cyberbullying victimization and perpetration can help in developing targeted interventions for both victims and bullies. This study highlighted the need for a self-regulatory model of resilience for modulating emotions, arousal, and behaviors across contexts, relationships, and difficulties. It also evidenced that moderate levels of resilience and positivity are sufficient to buffer youth from involvement in cyberbullying and to predict healthy adjustment and less pathological outcomes.

By profiling adolescents based on resilience levels, health outcomes, and cyberbullying involvement, we evidenced five distinct trajectories of risk evaluation for cyberbullying beyond participating roles. Our results confirmed the fundamental importance of assessing resilience and emotion regulatory resources together with peer violence involvement in identifying and targeting adolescents at risk.

The purpose of this paper is to make sense of the slow and frustrating process of democratization in Hong Kong through understanding the pan-democrats’ struggle for realizing universal suffrage. It aims to offer possible explanations for the current political impasse between Hong Kong and mainland China over the issue of universal suffrage.

This paper seeks to construct a triangular model of institutional constraint, clashing visions of democracy and mutual political distrust for understanding the pan-democrats’ struggle for realizing universal suffrage in Hong Kong since the 1980s, the nature of current political predicament they found themselves in and the current political impasse between the pan-democrats and Beijing.

The dilemma facing Hong Kong’s pan-democrats and Beijing’s leadership is attributed to the institutional constraints of Basic Law on Hong Kong’s system of governance, the clashing visions of Beijing-led Chinese-style democracy and Western-style liberal democracy as advocated by the pan-democrats and the mutual political distrust between the two parties. The findings suggest that this triangular model will remain relevant in understanding the political predicament of the pan-democrats under Chinese rule and the political impasse between Hong Kong and mainland China over universal suffrage for the coming decades.

This paper provides a new interpretation of the current political impasse between Hong Kong and mainland China over the issue of universal suffrage. It offers new insights into the nature of current political predicament the pan-democrats found themselves in amidst their fight for realizing universal suffrage since the 1980s by constructing a triangular model of institutional constraints, clashing visions of democracy and mutual political distrust.

The purpose of this paper is to explore the Chinese and American efforts in keeping the balance of innovation and copyright protection, with an emphasis on China's strategies under Western, especially American pressure. The research findings are expected to enhance mutual efforts from the two countries to protect copyright and boost innovation and facilitate genuine communication between both sides in their decade‐long intellectual property right (IPR) disputes.

For data collection, this study adopted in‐depth interviews of 45 participants who were either copyright holders as publishers and authors, or ordinary consumers in China. Under the theoretical guidance of strategies and tactics, thematic analysis was used to reveal the emerging themes in the transcripts concerning Chinese cultural perceptions of copyright in general and the relationship between innovation incentives and copyright protection in particular.

First, both countries used strategies for the calculation and manipulation of power in the enactment and implementation of their copyright laws. Second, in order to defend their own interests and obtain national advantages, both countries made full use of various tactics. It is promising for the large developing countries like China to implement and enforce their copyright law and other IPR regulations more effectively under global bargaining and collaborating.

Since little research has been done on the hidden agenda in the USA‐China copyright disputes, this paper attempts to fill this void by exploring the genuine intentions of both the USA and China in the enactment and implementation of their respective copyright laws and the strategies taken for their communication with the relevant parties at different stages of their own IPR development.

This paper aims to establish an organizational learning system model based on both western and Chinese management thoughts.

The approach is a conceptual model which is based on research within the field.

The model consists of nine interrelated organizational learning sub‐systems including “discovering”, “innovating”, “selecting”, “executing”, “transferring”, “reflecting”, “acquiring knowledge from environment”, “contributing knowledge to environment”, and “building organizational memory” ones. The evidences in some famous Chinese traditional cultural classics (including Great Learning, Doctrine of the Mean, The Analects of Confucius, Book of Change, Tao‐Te‐Ching, The Art of War and Chuan‐Xi‐Lu) that support the rationale of the model are described and analyzed.

Several propositions are developed and it is hoped that the model is applicable in both eastern and western business environments.

The purposes of this study are to demonstrate the conditional effect of functional fit and image fit on consumer brand attitude through the altruistic attributions and identify the criteria for choosing a perfect social cause for managers.

Based on the existing research, a conceptual model is proposed, explained the moderating effect of social cause affinity on the indirect influence of functional fit and image fit on consumer brand attitude via altruistic attributions; these relationships were assessed through a bootstrap procedure. The model was estimated with a sample of 240 subjects. Two newly created, printed corporate social responsibility (CSR) information served as the basic stimulus of this article.

The main conclusions are as follows: first, social cause affinity moderates the effect of functional fit and image fit on altruistic attributions, and the combination of image fit and social cause affinity both on high levels can more easily lead to the emergence of suspicion of company's altruistic motives, contrary to functional fit. Second, contingent on social cause affinity, CSR fit has an indirect relationship with consumer brand attitude mediated by altruistic attribution. More specifically, the indirect effect will be more positive for functional fit with higher levels of social cause affinity, but for image fit with low levels of affinity.

The experiment relied on fictitious corporate name. Most of the responders were students from Changchun. This may reduce the generalizability of the results.

Besides functional fit and image fit, social cause affinity should be treated as a key criterion to choose social cause.

This work analyses and compares the indirect effect of functional fit and image fit on consumer brand attitude through altruistic attributions. The findings give some enlightenment on solutions to contradictions in existing research.

Software vulnerabilities have been the greatest threat to the software industry for a long time. Many detection techniques have been developed to address this kind of issue, such as Fuzzing, but mere Fuzz Testing is not good enough, because the Fuzzing only alters the input of program randomly, and does not consider the basic semantics of the target software. The purpose of this paper is to introduce a new vulnerability exploring system, called “SEVE” to explore the target software more deeply and to generate more test cases with more accuracy.

Symbolic execution is the core technique of SEVE. The user can just input a standard input, and the SEVE system will record the execution path, alter the critical branches of it, and generate a totally different test case which will make the software under test execute a different path. In this way, some potential bugs or defects, even the exploitable vulnerabilities will be discovered. To alleviate path explosion, the authors propose heuristic method and function abstraction, which in turn improve the performance of SEVE even further.

We evaluate SEVE system to record critical data about its efficiency and performance. We have tested some real‐world vulnerabilities, from which the underlying file‐input programs suffer. After that, the results show that SEVE is not only re‐creating the discovery of these vulnerabilities, but also at a higher performance level than traditional techniques.

The paper proposes a new vulnerability exploring system, called “SEVE” to explore the target software and generate test cases automatically and also heuristic method and function abstraction to handle path explosion.

Under fix-position preload, the high rotation speed of the angular contact ball bearing exacerbates the frictional heat generation, which causes the increase of the bearing temperature and the thermal expansion. The high rotation speed also leads to the centrifugal expansion of the bearing. Under the thermal and centrifugal effect, the structural parameters of the bearing change, affecting the mechanical properties of the bearing. The mechanical properties of the bearing determine its heat generation mechanism and thermal boundary conditions. The purpose of this paper is to study the effect of centrifugal and thermal effects on the thermo-mechanical characteristics of an angular contact ball bearing with fix-position preload.

Because of operating conditions, elastic deformation occurs between the ball and the raceway. Assuming that the surfaces of the ball and channel are absolutely smooth and the material is isotropic, quasi-static theory and thermal network method are used to establish the thermo-mechanical coupling model of the bearing, which is solved by Newton–Raphson iterative method.

The higher the rotation speed, the greater the influence of centrifugal and thermal effects on the bearing dynamic parameters, temperature rise and actual axial force. The calculation results show that the effects of thermal field on bearing dynamic parameters are more significant than the centrifugal effect. The temperature rise and actual axial force of the bearing are measured. Comparing the calculation and the experimental results, it is found that the temperature rise and the actual axial force of the bearing are closer to reality considering thermal and centrifugal effects.

In the past studies, the thermo-mechanical coupling characteristics research and experimental verification of angular contact ball bearing with fix-position preload are not concerned. Research findings of this paper provide theoretical guidance for spindle design.

The impact of environmental regulations on ecological innovation is a contested issue in current research. However, there is no uniform consensus on existing conclusions. It is commonly accepted among scholars that external environment and organizational characteristics are key factors affecting ecological innovation. However, these are often analyzed in isolation, without consideration of the interaction between leadership and external environment. So this study aims to explore the impact of environmental regulation on ecological innovation by combining internal and external factors.

Based on institutional theory and leadership theory, this paper takes environmental regulation as the independent variable, environmental leadership as the intermediary variable and intellectual property protection level as the regulating variable to explore the impact mechanism of environmental regulation on ecological innovation.

The findings indicate an inverted U-shaped relationship between environmental regulation and ecological innovation. Additionally, there is a positive correlation between environmental leadership and intellectual property protection level with ecological innovation. Furthermore, environmental leadership partially mediates the relationship between environmental regulation and ecological innovation. However, the level of intellectual property protection does not have a significant moderating effect on the relationship between environmental leadership and ecological innovation.

This paper proposes suggestions for regional ecological innovation based on the current policy and research situation to promote its development.