Search results

The purpose of this paper is to present the embossing as a replication technique for structuring fuel channels in the anode-supported solid oxide fuel cells (SOFCs).

The anode laminate, which was exposed to embossing, consisted of eight layers of isostatic pressed Ni-yttria-stabilized zirconia tapes (Ni-YSZ). Preheating the mould and soaking the laminate in the plasticizer was applied before structuring of the channels to soften the laminate. Compressing tests were carried out to investigate the embossing ability of the Ni-YSZ laminate and to find the optimal processing parameters. Embossing was carried out with a testing machine, and the samples were exposed to embossing forces in the range up 20 kN with a certain speed of compression and a dwell time.

The embossing parameters (force of compression, speed of compression and dwell time) suitable for proper fuel channels formation were established. Shapes, profiles and dimensions of the embossed channels were analysed and compared to the micromachined channels. The model of the SOFC with embossed fuel channels was completed, and its current-voltage characteristic was measured.

Experiments proved that embossing can be the alternative method for patterning fuel microchannels in SOFCs. Embossing simplifies the process of fuel channel formation and reduces the time of SOFC fabrication. It is necessary to improve the geometry and quality of the mould formation to make the fuel channels deeper and of better surface finish.

The paper aims to present the innovative design of a planar multilayered high temperature solid oxide fuel cell (SOFC), which is easy to manufacture, and features high resistance to rapid temperature changes. Temperature resistance was accomplished thanks to easy to heat, thin flat ceramic structure of the cell and elimination of metallic interconnections.

The ceramic fuel cell consists of the anode core made of six to eight layers of nickel/yttria-stabilized zirconia tapes (Ni/YSZ) isostatically pressed into a laminate. Two networks of fuel distribution microchannels are engraved on both sides of the anode laminate. The microchannels are subsequently covered with a thin layer of the functional anode tape made of Ni/YSZ and a solid electrolyte tape made of YSZ.

The single planar double-sided ceramic SOFC of dimensions 19 × 60 × 1.2 mm3 provides 3.2 Watts of electric power. The prototype of the battery which consists of four SOFCs provides an output power of > 12 W. Tests show that the stack is resistant to the rapid temperature change. If inserted into a chamber preheated to 800°C, the stack provides the full power within 5 minutes. Multiple cycling does not destroy the stack.

This anode-supported fuel cell structure is provided with thin anode functional layers suspended on a large number of fine beams. The whole anode structure is made with the same ceramic material, so the mechanical stress is minimized during the cell operation.

Although there are many journalistic accounts of ongoing political events narrating about pro-democratic or antiauthoritarian movements, such as strikes, riots, and protest letters, not many scholarly analyses devote attention to the longitudinal analysis of the preceding events that lead to a spur of protests. Not many scholars account or are able to account for the activity of political dissidents that is often hidden, purposely censored, and covered from public eye. Most frequently, until the street strike and riots, the degree of spread of dissident activity within a country is unknown to scholars. It is equally difficult to find information about the national and international networks that political activists form to gain support and acceptance of their acclamations, propositions, and calls for political or economic reforms. Furthermore, only access to dissident press allows researchers to glimpse the activity of existing organizations looking at issues censored by existing governments.