Seval Uyanik and Kubra Hatice Kaynak
Elastane yarns contribute significant elastic properties to all types of fabrics and these properties for very important for wears including tights, sportswear, under wear, casual…
Abstract
Purpose
Elastane yarns contribute significant elastic properties to all types of fabrics and these properties for very important for wears including tights, sportswear, under wear, casual wear, swimwear, corsetry, etc. in terms of appearance, comfort and duration of wear. The paper aims to discuss this issue.
Design/methodology/approach
It is investigated with this study strength, fatigue and bagging properties of plated plain knitted fabrics containing different rates of elastane.
Findings
The study showed that single jersey, not having elastane and having the lowest fabric tightness, has the lowest bursting strength, the highest fatigue loading values in high extensions, the lowest fatigue height values and the worst bagging behavior. On the contrary of single jersey, full elastane fabric has the exact opposite characteristics considering the fabric properties examined.
Originality/value
Fabric with 1×1 elastane and fabric with 2×1 elastane is similar, and these fabrics show bagging behavior better than single jersey and worse than full elastane fabric whereas the other properties of these fabrics are close to full elastane fabric.
Details
Keywords
Mehmet Topalbekiroğlu and Hatice Kübra Kaynak
Testing the effect of machine washing and drying on dimensional stability produces information about the fabric types that satisfy consumers during end use. At present, it is a…
Abstract
Purpose
Testing the effect of machine washing and drying on dimensional stability produces information about the fabric types that satisfy consumers during end use. At present, it is a known fact that the weave patterns affect the dimensional stability property of woven fabrics. But the essential requirement is to determine the magnitude of this effect for weave types and establish the proper weave types for end use in definite tolerances. The purpose of this paper is to investigate the dimensional stability properties of 100 percent cotton woven fabrics as a function of weave type.
Design/methodology/approach
In total, 12 woven fabrics with different weave derivatives are woven with 100 percent cotton and Ne 30/1 combed ring spun yarn for this investigation. These samples are then washed and dried according to domestic washing and drying standard test procedures. The shrinkage values are measured and then expressed as a percentage of the initial dimensions.
Findings
It was observed that weave pattern has a significant effect on the dimensional behavior of woven fabrics. Weave patterns with a high number of interlacings have lower shrinkage values. At the same time, lower yarn crimp values restricted the fabric shrinkage and resulted in better dimensional stability. According to one way ANOVA results, the effect of weave type on dimensional stability is found to be significant (p<0.01). In addition to these, Pearson correlation analysis showed that there is an important, positive and fair relationship between the number of washing cycles and total shrinkage.
Research limitations/implications
The study covers 100 percent cotton woven fabrics with one type of warp and weft sett. The only finishing treatment applied to the sample fabrics was desizing. No dyeing was carried out.
Originality/value
Understanding the magnitude of the effect of weave type on dimensional stability of cotton woven fabrics produces more knowledge about products which satisfy the customers with respect to dimensional stability during usage.
Details
Keywords
Yaşar Erayman Yüksel and Yasemin Korkmaz
Durability of textile materials under wet conditions has become very important in recent years. The water repellency performance of fabrics should be maintained in the seam areas…
Abstract
Purpose
Durability of textile materials under wet conditions has become very important in recent years. The water repellency performance of fabrics should be maintained in the seam areas. The purpose of this paper is to analyze the effect of water repellent agents and sewing threads on the seam and water repellency performance properties of woven fabrics.
Design/methodology/approach
100 percent polyester woven fabrics were treated with three different water repellent finishing agents (silicone, fluorocarbons with 6 and 8 carbons) and then sewn with different sewing threads (unfinished/water repellent finished polyester/cotton corespun and polyamide filament). Afterwards, mechanical properties, seam performance and water repellency properties of these materials were measured.
Findings
The effect of finishing which was statistically significant on seam strength only in warp direction was significant on seam elongation and efficiency in both warp and weft directions. Seam strength, seam efficiency, seam slippage and seam pucker of fabrics sewn with polyamide threads were higher than others. The fluorocarbons applied to the fabrics gave higher water repellency values than silicones. In addition, as the chain length increased in fluorocarbons, water repellency performance increased. Sewing process reduced water resistance of fabrics; however, water repellent finish applied to the threads increased water resistance of fabrics.
Originality/value
As a result of the literature review, it was seen that water repellency property of a wear were studied in only seamless areas of fabrics. Originality of this study is that the water repellency properties are also analyzed in the seam areas of the fabrics and evaluated together with the seam performance characteristics.
Details
Keywords
Sedat Özer, Yaşar Erayman Yüksel and Yasemin Korkmaz
Design of bedding textiles that contact the human body affects the sleep quality. Bedding textiles contribute to comfort sense during the sleep duration, in addition to ambient…
Abstract
Purpose
Design of bedding textiles that contact the human body affects the sleep quality. Bedding textiles contribute to comfort sense during the sleep duration, in addition to ambient and bed microclimate. The purpose of this study is to evaluate the effects of different layer properties on the compression recovery and thermal characteristics of multilayer bedding textiles.
Design/methodology/approach
In this study, woven and knitted multilayer bedding textiles were manufactured from fabric, fiber, sponge and interlining, respectively. Different sponge thickness, fiber and interlining weight were used in the layers of samples. Later, the pilling resistance, compression and recovery, air permeability and thermal conductivity of multilayer bedding textiles were investigated.
Findings
The results indicated that samples with the higher layer weight and thickness provide better compression recovery and lower air permeability properties. It was also found that knitted surfaces show the higher air permeability than the woven surfaces depending on the fabric porosity. Layer properties have insignificant effect on the thermal conductivity values.
Originality/value
While researchers mostly focus on thermal comfort properties of garments, there are limited studies about comfort properties of bedding textiles in the literature. Furthermore, compression recovery properties of bedding textiles have also a great importance in terms of comfort. Originality of this study is that these properties were analyzed together.