Search results

Thermopile infrared (IR) detectors are one of the most important IR devices. Considering that the surface area of conventional four-end-beam (FEB)-based thermopile devices cannot be effectively used and the performance of this type of devices is relatively low, this paper aims to present a double-end-beam (DEB)-based thermopile device with high duty cycle and performance. The paper aims to discuss these issues.

Numerical analysis was conducted to show the advantages of the DEB-based thermopile devices.

Structural size of the DEB-based thermopiles may be further scaled down and maintain relatively higher responsivity and detectivity when compared with the FEB-based thermopiles. The authors characterized the thermoelectric properties of the device proposed in this paper, which achieves a responsivity of 1,151.14 V/W, a detectivity of 4.15 × 108 cm Hz1/2/W and a response time of 14.46 ms sensor based on DEB structure.

The paper proposed a micro electro mechanical systems (MEMS) thermopile infrared sensor based on double-end-beam structure.

The shape of a product plays a crucial role in shaping consumer behavior. Despite the voluminous research on factors influencing consumers’ shape preferences, there remains a limited understanding of how the busy mindset, a mentality increasingly emphasized by marketing campaigns, works. This study aims to fill this gap by exploring the relationship between a busy mindset and the preference for angular-shaped versus circular-shaped products and brand logos.

This research consists of seven experimental studies using various shape stimuli, distinct manipulations of busy mindset, different assessments of shape preference and samples drawn from multiple countries.

The findings reveal that a busy mindset leads to a preference for angular shapes over circular ones by amplifying the need for uniqueness. In addition, these effects are attenuated when products are scarce.

This research represents one of the pioneering efforts to study the role of a busy mindset on consumers’ aesthetic preferences. Beyond yielding insights for practitioners into visual marketing, this research contributes to the theories on the busy mindset and shape preference.

This study aims to construct a double layer heat insulation coating based on hollow glass microspheres (HGMs) and to investigate the effect of particle size on barrier property and heat insulation performance.

The waterborne double layer coating was composed of an anticorrosive epoxy ester primer and an HGM-containing silicone acrylic topcoat. With varied HGM sizes (20 μm, 40 μm, 60 μm and a 1:3 w/w mixture of 20 and 60 μm particles), the coating was immersed in 3.5 wt% NaCl solution for 28 days and was then subjected to a salt spray test for 450 h. The barrier properties of the coating were evaluated through electrochemical impedance spectroscopy. Heat insulation performance was examined using a self-made device.

The addition of HGMs decreased the barrier properties of the coating by creating particle/resin interfaces for water penetration. In the HGMs-containing coatings, the use of larger HGMs showed relatively good barrier properties because of the lower particle density. The coating with smaller particles yielded a higher heat insulating capacity as indicated by lower equilibrium temperatures.

Future work will be focused on improving the barrier properties of the coating. Field exposure tests should also be performed to assess the long-term performance of the coating.

The mechanical properties of the coatings in this study also implied that HGMs can be used to develop scratch-resistant and impact-resistant coatings. Other potential applications for further studies include the uses of HGMs for coatings with improved fire retardancy and electromagnetic interference shielding.

A double layer coating was developed to provide balanced performance on both anticorrosion and heat insulation. The effects of HGM size were particularly highlighted.

Parallel factor analysis (PARAFAC) coupled with support-vector machine (SVM) was carried out to identify and discriminate between the fluorescence spectroscopies of coconut water brands.

PARAFAC was applied to reduce three-dimensional data of excitation emission matrix (EEM) to two-dimensional data. SVM was applied to discriminate between six commercial coconut water brands in this study. The three largest variation data from fluorescence spectroscopy were extracted using the PARAFAC method as the input data of SVM classifiers.

The discrimination results of the six commercial coconut water brands were achieved by three SVM methods (Ga-SVM, PSO-SVM and Grid-SVM). The best classification accuracies were 100.00%, 96.43% and 94.64% for the training set, test set and CV accuracy.

The above results indicate that fluorescence spectroscopy combined with PARAFAC and SVM methods proved to be a simple and rapid detection method for coconut water and perhaps other beverages.

The purpose of this paper is to obtain the optimal N₂/Ar ratio parameters for preparing Ta (C, N) coating. Three coatings with different N₂/Ar ratios were prepared on the TA15 substrate, and their effects on the wear properties of the coatings were discussed.

Ta(C, N) coatings with three different N₂/Ar ratios were prepared on TA15 substrates using the double cathode glow metallurgical plasma alloying technique (DGMPA) using a step-by-step diffusion method.

With the increase of N₂/Ar flow ratio, the hardness and elastic modulus of the coating first increase and then decrease. Compared with the S1 sample (N₂/Ar gas ratio 25: 75) and the S3 sample (N₂/Ar gas ratio 75: 25), the S2 sample (N₂/Ar gas ratio 50: 50) has better mechanical properties, with hardness increased by 48.45% and 6.8%, respectively, and elastic strain ratio increased by 22.8% and 28.5%, respectively. Moreover, the wear degree of the S2 sample is less than other samples. The wear rate of the S2 sample was 32.4% lower than the S3 sample at 300°C and 14.3% lower than the S3 sample at 500°C. Therefore, the S2 sample has the best mechanical properties and the best high temperature wear resistance.

Ta(C, N) coatings were prepared by DGMPA technology, and the wear mechanism of Ta(C, N) coatings with different N₂/Ar ratios was investigated to reduce the wear rate.

International relations and security studies suffer from an inadequate understanding of established theories in organizational leadership and management studies. This chapter contributes to these disciplines by drawing upon such models to analyze the changes in political leadership approaches of China and the United States in their interactions over maritime territorial disputes in the South China Sea (SCS). Using the transactional–transformational and directive–participative leadership paradigms as its foundation, the analysis argues (1) that contextual factors unique to the each country shape its political leadership styles and (2) the leadership styles within each case study have changed dramatically over the past decades in terms of their rhetoric and policies for managing the SCS disputes. Empirical evidence is based on the policies, leaders’ statements, and official documents of China, a claimant to SCS maritime territory, and the United States, an influential stakeholder in the disputes. In the two case studies, the chapter discusses the implications of the changing leadership styles for the understanding of political interaction in the region and the future of the SCS disputes.

This chapter provides research results from a study of contemporary leadership approaches (i.e., paternalistic, charismatic, transformational, aesthetic, authentic, and pragmatic leadership) in eight Chinese organizations. Data were collected from case studies in four private-owned enterprises (POEs) and four state-owned enterprises (SOEs) through both interviews and questionnaires. The main purpose of this chapter is to provide contextual analysis of these findings by applying the concept of field from Bourdieu's sociology. This research contributes to the leadership literature by generalizing Western leadership theories to the Chinese context as well as by giving an insight into contemporary leadership approaches in modern Chinese business by deeply contextualizing these leadership behaviors.