Search results

Detecting O₂ gas in a confined space at room temperature is particularly important to monitor the work process of precision equipment. This study aims to propose a miniaturized, low-cost, mass-scale produced O₂ sensor operating around 30°C.

The O₂ sensor based on lanthanum fluoride (LaF₃) solid electrolyte thin film was developed using MEMS technology. The principle of the sensor was a galvanic cell H₂O, O₂, Pt | LaF₃ | Sn, SnF₂ |, in which the Sn film was prepared by magnetron sputtering, and the LaF₃ film was prepared by thermal resistance evaporation.

Through pretreatments, the sensor’s response signal to 40% oxygen concentration was enhanced from 1.9 mV to 46.0 mV at 30°C and 97.0% RH. Tests at temperatures from 30°C to 50°C and humidity from 32.4% RH to 97.0% RH indicated that the output electromotive force (EMF) has a linear relationship with the logarithm of the oxygen concentration. The sensitivity of the sensor increases with an increase in both humidity and temperature in the couple mode, and the EMF of the sensor follows well with the Nernst equation at different temperatures and humidity.

This research could be applied to monitor the oxygen concentration below 25% in confined spaces at room temperature safely without a power supply.

The relationship between temperature and humidity coupling and the response of the sensor was obtained. The nano-film material was integrated with the MEMS process. It is expected to be practically applied in the future.

The purpose of this paper is to construct a multiwing chaotic system that has hidden attractors with multiple stable equilibrium points. Because the multiwing hidden attractors chaotic systems are safer and have more dynamic behaviors, it is necessary to construct such a system to meet the needs of developing engineering.

By introducing a multilevel pulse function into a three-dimensional chaotic system with two stable node–foci equilibrium points, a hidden multiwing attractor with multiple stable equilibrium points can be generated. The switching behavior of a hidden four-wing attractor is studied by phase portraits and time series. The dynamical properties of the multiwing attractor are analyzed via the Poincaré map, Lyapunov exponent spectrum and bifurcation diagram. Furthermore, the hardware experiment of the proposed four-wing hidden attractors was carried out.

Not only unstable equilibrium points can produce multiwing attractors but stable node–foci equilibrium points can also produce multiwing attractors. And this system can obtain 2N + 2-wing attractors as the stage pulse of the multilevel pulse function is N. Moreover, the hardware experiment matches the simulation results well.

This paper constructs a new multiwing chaotic system by enlarging the number of stable node–foci equilibrium points. In addition, it is a nonautonomous system that is more suitable for practical projects. And the hardware experiment is also given in this article which has not been seen before. So, this paper promotes the development of hidden multiwing chaotic attractors in nonautonomous systems and makes sense for applications.

This study aims to apply an electrochemical grinding (ECG) technology to improve the material removal rate (MRR) under the premise of certain surface roughness in machining U71Mn alloy.

The effects of machining parameters (electrolyte type, grinding wheel granularity, applied voltage, grinding wheel speed and machining time) on the MRR and surface roughness are investigated with experiments.

The experiment results show that an electroplated diamond grinding wheel of 46# and 15 Wt.% NaNO₃ + 10 Wt.% NaCl electrolyte is more suitable to be applied in U71Mn ECG. And the MRR and surface roughness are affected by machining parameters such as applied voltage, grinding wheel speed and machining time. In addition, the maximum MRR of 0.194 g/min is obtained with the 15 Wt.% NaCl electrolyte, 17 V applied voltage, 1,500 rpm grinding wheel speed and 60 s machining time. The minimum surface roughness of Ra 0.312 µm is obtained by the 15 Wt.% NaNO₃ + 10 Wt.% NaCl electrolyte, 13 V applied voltage, 2,000 rpm grinding wheel speed and 60 s machining time.

Under the electrolyte scouring effect, the products and the heat generated in the machining can be better discharged. ECG has the potential to improve MRR and reduce surface roughness in machining U71Mn.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-10-2023-0341/

To realize the operation optimizing of today’s distribution power system (DPS), like economic dispatch, contingency analysis, and reliability and security assessment etc., it is beneficial and indispensable that a faster linear load flow method is adopted with a reasonable accuracy. Considering the high R/X branch ratios and unbalanced features of DPS, the purpose of this paper is to propose a faster and non-iterative linear load flow solution for DPS.

Based on complex function theory, the derivations of the injection current linear approximation have been proposed for the balanced and the single-, double- and three-phase unbalanced loads of DPS on complex plane. Then, a simple and direct linear load flow has been developed with loop-analysis theory and node-branch incidence matrix.

The methodology is appropriate for balanced and single-, double- and three-phase hybrid distribution system with different load models. It provides a fast and robust load flow method with a satisfactory accuracy to handle the problems of DPS whenever the load flow solutions are required.

The distributed generators (DGs) with unity or fixed power factors can be easily included. But the power and voltage nodes cannot be dealt with directly and need to be further studied.

By combining the current linear approximation with the loop theory-based method, a new linear load flow method for DPS has been proposed. The method is valid and acute enough for balanced and unbalanced systems and has no convergent problems.

This paper aims to solve the problem that strong noise interference seriously affects the direction of arrival (DOA) estimation in complex underwater acoustic environment. In this paper, a combined noise reduction algorithm and micro-electro-mechanical system (MEMS) vector hydrophone DOA estimation algorithm based on singular value decomposition (SVD), variational mode decomposition (VMD) and wavelet threshold denoising (WTD) is proposed.

Firstly, the parameters of VMD are determined by SVD, and the VMD method can decompose the signal into multiple intrinsic mode functions (IMFs). Secondly, the effective IMF component is determined according to the correlation coefficient criterion and the IMF less than the threshold is processed by WTD. Then, reconstruction is carried out to achieve the purpose of denoising and calibration baseline drift. Finally, DOA estimation is achieved by the combined directional algorithm of preprocessed signal.

Simulation and field experiments results show that the algorithm has good noise reduction and baseline drift correction effects for nonstationary underwater signals, and high-precision azimuth estimation is realized.

This research provides the basis for MEMS hydrophone detection and positioning and has great engineering significance in underwater detection system.

The purpose of this paper is to examine customers’ behavioural outcomes based on the actual attitudinal responses of mobile marketing initiatives.

A total of 764 usable responses was included through a non-probability convenient sampling method. The data used in the study gathered from mobile users of 37 cities from nine states across India. The analysis of moment structures 22.0 and SmartPLS 3.0 statistical programmes were used for measurement validation and to test the structural model.

The study indicated that mobile marketing had a more significant effect on customers’ negative attitudes and followed by on positive attitudes. Despite the strong significant effect on customers’ negative attitudes, it does not display more significant effect on negative behavioural outcomes. Finally, the study suggested that customers’ positive attitudes display more favourable behavioural outcomes of mobile marketing initiatives.

The paper would help the mobile marketers and advertisers to understand the impact of mobile marketing initiatives on customers’ attitudes and behavioural outcomes and how it can be managed to ensure the higher level of adoption and acceptance.

The results of the analysis indicated that when the users have favourable attitudes of mobile marketing initiatives, it can be highly effective in triggering of favourable behavioural outcomes.

The purpose of this paper is to develop an integrated, computer vision-based system to operate a commercial wheelchair-mounted robotic manipulator (WMRM). In addition, a gesture recognition interface system was developed specially for individuals with upper-level spinal cord injuries including object tracking and face recognition to function as an efficient, hands-free WMRM controller.

Two Kinect® cameras were used synergistically to perform a variety of simple object retrieval tasks. One camera was used to interpret the hand gestures and locate the operator's face for object positioning, and then send those as commands to control the WMRM. The other sensor was used to automatically recognize different daily living objects selected by the subjects. An object recognition module employing the Speeded Up Robust Features algorithm was implemented and recognition results were sent as a commands for “coarse positioning” of the robotic arm near the selected object. Automatic face detection was provided as a shortcut enabling the positing of the objects close by the subject's face.

The gesture recognition interface incorporated hand detection, tracking and recognition algorithms, and yielded a recognition accuracy of 97.5 percent for an eight-gesture lexicon. Tasks’ completion time were conducted to compare manual (gestures only) and semi-manual (gestures, automatic face detection, and object recognition) WMRM control modes. The use of automatic face and object detection significantly reduced the completion times for retrieving a variety of daily living objects.

Integration of three computer vision modules were used to construct an effective and hand-free interface for individuals with upper-limb mobility impairments to control a WMRM.

The purpose of the paper is to investigate compensation and related welfare issues in the case of the expropriation of land for urban redevelopment in China.

A mixed methods quantitative and qualitative approach was selected to undertake the research. This involved a wide ranging qualitative review of the academic and policy literature to explore the relevant arguments and issues, combined with a quantitative regression analysis of survey data collected from research subjects.

The research identified the complex and changeable phenomena of urban village redevelopment in China, and the variable compensation arrangements used. The research found that monthly family income before land expropriation, monthly family expense before expropriation, the location of the housing expropriation and family unit size are important determinants for the property holders chosen methods of compensation. It also found that an increase in family size leads to a decreasing probability that the expropriated farmers choose the single monetary compensation relative to the alternative option of housing compensation. The degree of satisfaction with compensation, changes in monthly family income and expense are found to be significant determinants for changes in life satisfaction.

The research made the following four recommendations based upon the qualitative and quantitative analysis: that local governments should pay closer governance/ political attention to changes in the welfare of the farmers/ villagers whose property has been expropriated; that central and local government should aim to improve the compensation system for rural land and property expropriation, to make the compensation policy be perceived as fairer and more reasonable by citizens; that a broad National standard of compensation be used within a pragmatic locally focussed regime; that the Chinese Central, Provincial and Local governments can devise improved policy tools and make more effective policy interventions by learning from the experiences (both successes and failures) of other countries approaches to this topic. It also suggested that further research be undertaken investigating the multitude of local level policy experiments, as a way of developing better National compensation standards based upon those compensation standards that appear to be working – and have citizen support – at the local level.

The literature review identified recent developments in Chinese urban studies and originally synthesised both recent and longstanding work on the issue of urban villages in China. The research also suggested changes to the National and Local legal and policy framework for compensation cases in urban redevelopment expropriation scenarios.

Drawing on job crafting theory and the social cognitive theory of work satisfaction, the purpose of this study is to examine the impacts of task, relational and cognitive crafting on job satisfaction and how occupational self-efficacy (OSE) and hierarchical organizational culture affect the execution and outcome of job crafting behaviors.

Data were collected at four time points among Chinese media professionals (N = 198) during three consecutive months. Regression analysis and the bootstrap method were used for hypothesis testing.

Only cognitive crafting was found to mediate the positive relationship between OSE and job satisfaction. In a hierarchical organizational culture, the positive effects of OSE on task, relational and cognitive crafting became stronger, while the effect of task crafting on job satisfaction became negative. The authors also identified a conditional negative effect of OSE on job satisfaction via task crafting. The mediating effect of cognitive crafting was consistent despite the levels of hierarchical culture.

To retain new hires, organizations should look for efficacious individuals and encourage the individuals to cognitively craft individuals' jobs, especially in a hierarchical culture. Moreover, job crafting interventions should be carefully designed in this type of culture.

This research identifies the three dimensions of job crafting as mediators that link OSE to job satisfaction and reveals the role of hierarchical culture in moderating these relationships.

The purpose of the paper is to better measure the risks and volatility of the Bitcoin market by using the proposed novel risk measurement model.

The joint regression analysis of value at risk (VaR) and expected shortfall (ES) can effectively overcome the non-elicitability problem of ES to better measure the risks and volatility of financial markets. And because of the incomparable advantages of the long- and short-term memory (LSTM) model in processing non-linear time series, the paper embeds LSTM into the joint regression combined forecasting framework of VaR and ES, constructs a joint regression combined forecasting model based on LSTM for jointly measuring VaR and ES, i.e. the LSTM-joint-combined (LSTM-J-C) model, and uses it to investigate the risks of the Bitcoin market.

Empirical results show that the proposed LSTM-J-C model can improve forecasting performance of VaR and ES in the Bitcoin market more effectively compared with the historical simulation, the GARCH model and the joint regression combined forecasting model.

The proposed LSTM-J-C model can provide theoretical support and practical guidance to cryptocurrency market investors, policy makers and regulatory agencies for measuring and controlling cryptocurrency market risks.

A novel risk measurement model, namely LSTM-J-C model, is proposed to jointly estimate VaR and ES of Bitcoin. On the other hand, the proposed LSTM-J-C model provides risk managers more accurate forecasts of volatility in the Bitcoin market.