Search results

This paper aims to develop a new approach for aeroelastic analysis of hingeless rotor blades.

The aeroelastic approach developed here is based on the geometrically exact fully intrinsic beam equations and three-dimensional unsteady aerodynamics.

The developed approach is accurate, fast and very useful in rotorcraft aeroelastic analysis.

This beam formulation has been never combined with three-dimensional aerodynamic model to be used for aeroelastic analysis of blades. In addition, it is possible to handle the composite blades, as well as blades with initial curvatures and twist with this proposed formulation.

The purpose of this paper is to analyze the stability of aeroelastic systems using aeroelastic frequency response function (FRF).

The proposed technique determines the instability boundary of an aeroelastic system based on condition number (CN) of aeroelastic FRF matrix or directly from FRFs data.

Stability margins of typical section and hingeless helicopter rotor blade in the subsonic flow regimes (quasi‐steady and unsteady models) are determined using proposed techniques as two case studies.

The paper introduces a technique which is applicable not only when aerodynamic and structure analytical models are available but also when there are experimental models for structure and/or aerodynamics, such as impulse response functions data or FRFs data. In other words, the main advantage of the proposed method, besides its simplicity and low memory requirement, is its ability to utilize experimental data.

The purpose of this paper is to study the static buckling and free vibration of continuously graded ceramic-metal beams by employing a refined higher-order shear deformation, which is also the primary goal of this paper.

The proposed model is able to catch both the microstructural and shear deformation impacts without employing any shear correction factors, due to the realistic distribution of transverse shear stresses. The material properties are supposed to vary across the thickness direction in a graded form and are estimated by a power-law model. The equations of motion and related boundary conditions are extracted using Hamilton’s principle and then resolved by analytical solutions for calculating the critical buckling loads and natural frequencies.

The obtained results are checked and compared with those of other theories that exist in the literature. At last, a parametric study is provided to exhibit the influence of different parameters such as the power-law index, beam geometrical parameters, modulus ratio and axial load on the dynamic and buckling characteristics of FG beams.

Searching in the literature and to the best of the authors’ knowledge, there are limited works that consider the coupled effect between the vibration and the axial load of FG beams based on new four-variable refined beam theory. In comparison with a beam model, the number of unknown variables resulting is only four in the general cases, as against five in the case of other shear deformation theories. The actual model represents a real distribution of transverse shear effects besides a parabolic arrangement of the transverse shear strains over the thickness of the beam, so it is needless to use of any shear correction factors.

This study aims to propose a new airport gate assignment method to effectively improve the comprehensive operation capacity and efficiency of hub airport. Gate assignment is one of the most important tasks for airport ground operations, which assigns appropriate airport gates with high efficiency reasonable arrangement.

In this paper, on the basis of analyzing the characteristics of airport gates and flights, an efficient multi-objective optimization model of airport gate assignment based on the objectives of the most balanced idle time, the shortest walking distances of passengers and the least number of flights at apron is constructed. Then an improved ant colony optimization (ICQACO) algorithm based on the ant colony collaborative strategy and pheromone update strategy is designed to solve the constructed model to fast realize the gate assignment and obtain a rational and effective gate assignment result for all flights in the different period.

In the designed ICQACO algorithm, the ant colony collaborative strategy is used to avoid the rapid convergence to the local optimal solution, and the pheromone update strategy is used to quickly increase the pheromone amount, eliminate the interference of the poor path and greatly accelerate the convergence speed.

The actual flight data from Guangzhou Baiyun airport of China is selected to verify the feasibility and effectiveness of the constructed multi-objective optimization model and the designed ICQACO algorithm. The experimental results show that the designed ICQACO algorithm can increase the pheromone amount, accelerate the convergence speed and avoid to fall into the local optimal solution. The constructed multi-objective optimization model can effectively improve the comprehensive operation capacity and efficiency. This study is a very meaningful work for airport gate assignment.

An efficient multi-objective optimization model for hub airport gate assignment problem is proposed in this paper. An improved ant colony optimization algorithm based on ant colony collaborative strategy and the pheromone update strategy is deeply studied to speed up the convergence and avoid to fall into the local optimal solution.

Due to its high leverage nature, a bank suffers vitally from the credit risk it inherently bears. As a result, managing credit is the ultimate responsibility of a bank. In this chapter, we examine how efficiently banks manage their credit risk via a powerful tool used widely in the decision/management science area called data envelopment analysis (DEA). Among various existing versions, our DEA is a two-stage, dynamic model that captures how each bank performs relative to its peer banks in terms of value creation and credit risk control. Using data from the largest 22 banks in the United States over the period of 1996 till 2013, we have identified leading banks such as First Bank systems and Bank of New York Mellon before and after mergers and acquisitions, respectively. With the goal of preventing financial crises such as the one that occurred in 2008, a conceptual model of credit risk reduction and management (CRR&M) is proposed in the final section of this study. Discussions on strategy formulations at both the individual bank level and the national level are provided. With the help of our two-stage DEA-based decision support systems and CRR&M-driven strategies, policy/decision-makers in a banking sector can identify improvement opportunities regarding value creation and risk mitigation. The effective tool and procedures presented in this work will help banks worldwide manage the unknown and become more resilient to potential credit crises in the 21st century.

The purpose of this article is to carry out the thermal buckling analysis of power and sigmoid functionally graded material Sandwich plate (P-FGM and S-FGM) under uniform, linear, nonlinear and sinusoidal temperature rise.

Thermal buckling of FGM Sandwich plates namely, FGM face with ceramic core (Type-A) and homogeneous face layers with FGM core (Type-B), incorporated with nonpolynomial shear deformation theories are considered for an analytical solution in this investigation. Effective material properties and thermal expansion coefficients of FGM Sandwich plates are evaluated based on Voigt's micromechanical model considering power and sigmoid law. The governing equilibrium and stability equations for the thermal buckling analysis are derived based on sinusoidal shear deformation theory (SSDT) and inverse trigonometric shear deformation theory (ITSDT) along with Von Karman nonlinearity. Analytical solutions for thermal buckling are carried out using the principle of minimum potential energy and Navier's solution technique.

Critical buckling temperature of P-FGM and S-FGM Sandwich plates Type-A and B under uniform, linear, non-linear, and sinusoidal temperature rise are obtained and analyzed based on SSDT and ITSDT. Influence of power law, sigmoid law, span to thickness ratio, aspect ratio, volume fraction index, different types of thermal loadings and Sandwich plate types over critical buckling temperature are investigated. An analytical method of solution for thermal buckling of power and sigmoid FGM Sandwich plates with efficient shear deformation theories has been successfully analyzed and validated.

The temperature distribution across FGM plate under a high thermal environment may be uniform, linear, nonlinear, etc. In practice, temperature variation is an unpredictable phenomenon; therefore, it is essential to have a temperature distribution model which can address a sinusoidal temperature variation too. In the present work, a new sinusoidal temperature rise is proposed to describe the effect of sinusoidal temperature variation over critical buckling temperature for P-FGM and S-FGM Sandwich plates. For the first time, the FGM Sandwich plate is modeled using the sigmoid function to investigate the thermal buckling behavior under the uniform, linear, nonlinear and sinusoidal temperature rise. Nonpolynomial shear deformation theories are utilized to obtain the equilibrium and stability equations for thermal buckling analysis of P-FGM and S-FGM Sandwich plates.

The purpose is to explore the free vibration behaviour of elastic foundation-supported porous functionally graded nanoplates using the Rayleigh-Ritz approach. The goal of this study is to gain a better knowledge of the dynamic response of nanoscale structures made of functionally graded materials and porous features. The Rayleigh-Ritz approach is used in this study to generate realistic mathematical models that take elastic foundation support into account. This research can contribute to the design and optimization of advanced nanomaterials with potential applications in engineering and technology by providing insights into the influence of material composition, porosity and foundation support on the vibrational properties of nanoplates.

A systematic methodology is proposed to evaluate the free vibration characteristics of elastic foundation-supported porous functionally graded nanoplates using the Rayleigh-Ritz approach. The study began by developing the mathematical model, adding material properties and establishing governing equations using the Rayleigh-Ritz approach. Numerical approaches to solve the problem are used, using finite element methods. The results are compared to current solutions or experimental data to validate the process. The results are also analysed, keeping the influence of factors on vibration characteristics in mind. The findings are summarized and avenues for future research are suggested, ensuring a robust investigation within the constraints.

The Rayleigh-Ritz technique is used to investigate the free vibration properties of elastic foundation-supported porous functionally graded nanoplates. The findings show that differences in material composition, porosity and foundation support have a significant impact on the vibrational behaviour of nanoplates. The Rayleigh-Ritz approach is good at modelling and predicting these properties. Furthermore, the study emphasizes the possibility of customizing nanoplate qualities to optimize certain vibrational responses, providing useful insights for engineering applications. These findings expand understanding of dynamic behaviours in nanoscale structures, making it easier to build innovative materials with specific features for a wide range of industrial applications.

The novel aspect of this research is the incorporation of elastic foundation support, porous structures and functionally graded materials into the setting of nanoplate free vibrations, utilizing the Rayleigh-Ritz technique. Few research have looked into this complex combo. By tackling complicated interactions, the research pushes boundaries, providing a unique insight into the dynamic behaviour of nanoscale objects. This novel approach allows for a better understanding of the interconnected effects of material composition, porosity and foundation support on free vibrations, paving the way for the development of tailored nanomaterials with specific vibrational properties for advanced engineering and technology applications.

This paper aims to examine the efficiency of Islamic vs conventional banks in Malaysia by unveiling the traditional efficiency concept – black box – with a three-stage network structure of bank operations.

This paper applies data envelopment analysis (DEA) for examining bank efficiency. An adaptive three-step network DEA (NDEA) model is demonstrated for redefining the traditional black box of banking operations. Slack-based variable returns to scale approach is used. Data from all 43 commercial banks in Malaysia are examined over a six-year study period (2010-2015). Inputs and outputs of the model are selected based on CAMELS rating. Undesired output is also considered in time of examining bank efficiency in Malaysia.

The empirical results of this study signify that only a few banks in Malaysia have been performing well in converting deposits and equities into profit as well as minimizing loan loss provisions. Islamic banks in Malaysia have performed better both in production (converting deposits and equities into earning assets) and profitability (converting loans into net income). Conventional banks, however, have over scored in intermediation (converting earning assets into loans).

An adaptive NDEA approach proposed in this paper defines the core banking process instead of traditional approaches in examining bank efficiency based on individual functions (nodes in the network model). This approach has proven to provide better benchmark capacity.

Based on previous research, we choose nickel alloy 718 as the research material and use finite element analysis (FEA) to simulate the hydrogen diffusion in lattice, grain, boundary grain and dislocation in different thermal loads, aiming to understand the intricate mechanisms underlying hydrogen diffusion in nickel-based alloys, which will contribute to driving progress in the field of hydrogen diffusion for understanding and management HE.

In this research, we focus on nickel alloy 718, creating a numerical model with traps to simulate the hydrogen diffusion in lattice, grain, boundary grain and dislocation with different thermal loads, by FEA.

The results demonstrated that traps improve the hydrogen saturation in materials, and because of thermal saturation and heat flux, higher temperatures decrease the hydrogen solubility and increase hydrogen diffusion velocity, which can decrease hydrogen saturation.

Based on our previous research and publications, we developed a finite element model to define the hydrogen trapping in different microstructural features of nickel-based superalloys. The model is very complex with a very large number of elements capable of obtaining very affordable results.

In the present paper, the new concept of “memory dependent derivative” in the Pennes’ bioheat transfer and heat-induced mechanical response in human living tissue with variable thermal conductivity and rheological properties of the volume is considered.

A problem of cancerous layered with arbitrary thickness is considered and solved analytically by Kirchhoff and Laplace transformation. The analytical expressions for temperature, displacement and stress are obtained in the Laplace transform domain. The inversion technique for Laplace transforms is carried out using a numerical technique based on Fourier series expansions.

Comparisons are made with the results anticipated through the coupled and generalized theories. The influence of variable thermal, volume materials properties and time-delay parameters for all the regarded fields for different forms of kernel functions is examined.

The results indicate that the thermal conductivity and volume relaxation parameters and MDD parameter play a major role in all considered distributions. This dissertation is an attempt to provide a theoretical thermo-viscoelastic structure to help researchers understand the complex thermo-mechanical processes present in thermal therapies.