Search results

Medical schools aspire to graduate doctors who are competent in interpreting, conducting and publishing scientific research. Hence, the purpose of the paper is explore the impact of a structured compulsory community-oriented, project-based research program in the undergraduate medical curriculum on medical graduates’ future careers, publications and motivation for scientific research.

An online questionnaire was sent through the Alumni Association of the Arabian Gulf University (AGU) to medical graduates who have valid email addresses, seeking information on their scientific productivity along with demographic and current employment data. Responses were collated and analyzed using a standard statistical software package. The chi-square test and p-value were calculated. P-value <0.05 was considered statistically significant.

Completed forms were received from 91 medical graduates. In this sample, almost a quarter of the respondents have published a research paper out of their undergraduate research project, and about 50% have published at least one paper (as main or co-author) after graduation. Both demographic and medical specialty was not related to the doctor's perception of the benefits they have attained from the compulsory undergraduate research program. However, medical graduates who are at senior levels in their medical careers and those who are employed in secondary healthcare are significantly more likely to publish research papers.

The compulsory community-oriented, project-based research program in AGU has positively contributed to the research productivity of graduates, and it would be worthwhile to include such programs as an integral part of the undergraduate medical curriculum.

The aim of this paper is to evaluate the storage stability of improved dambu, a steamed granulated dumpling product generally made from millet, was produced from maize (Zea mays), millet (Pennisetum glaucum), sorghum (Sorghum bicolor) and acha (Digitaria exilis). It is a popular mid‐day meal of the Fulanis of Nigeria normally sprinkled into fermented skimmed milk or whole milk and sugar may be added to taste.

Improved dambu was prepared in the laboratory using decorticated clean cereal grains which were pulverished into coarse particles, mixed with spices, preservative (sorbic acid) and water and steamed for 20 min. The improved dambu products were packaged in low‐density polyethylene (LDPE), LDPE with plastic and LDPE with paperboard and stored at room temperature (25 ^○C) for six days. Analysis was carried out on the products following documented and established procedures.

Data obtained indicated that during storage, pH decrease was observed while titratable acidity increased for improved dambu products. The microbial load (cfu/g) increased with storage time for all the products packaged in LDPE, LDPE with plastic and LDPE with paperboard. Dambu has a limited storage life of one day at room temperature (25 ^○C) and four days with 0.2 per cent (w/w) sorbic acid as preservative. Micro‐organisms of significance in the products are Aspergillus sp, Penicillum sp, Candida sp, Staphylococcus aureus and Enterobacter aerogenes. The nature of the microflora suggested that dambu is a good substrate for fungal growth. In the comparative study of dambu products with and without sorbic acid, there was no significant difference in the mean scores for all the assessed parameters.

The consumption of dambu from different cereal grains is encouraged especially where a particular cereal is off season. The shelf‐life of dambu was extended to four days by using 0.2 per cent (w/w) sorbic acid as preservative and packaged in LDPE with plastic and LDPE with paperboard. Further research should be carried out to extend the shelf‐life more.

The findings have suggested that dambu is necessary to cereal industry and baby foods (weaning foods).

The results of this research contributes to the knowledge of cereal meals, especially those that are indigenous to Nigeria and West Africa.

The aim of this paper is to evaluate the nutrient and sensory properties of dambu, a steamed granulated dumpling product produced from maize (Zea mays), millet (Pennisetum glaucum), sorghum (Sorghum bicolor), and acha (Digitaria exilis), grains. It is a popular midday meal of the Fulanis of Nigeria, normally sprinkled into fermented skimmed milk or whole milk and sugar may be added to taste.

Dambu was prepared in the laboratory using decorticated clean cereal grains, which were pulverized into coarse particles, mixed with spices and water, and steamed for 20 min. Analysis was carried out on the products following document and established procedures.

Data obtained indicated that dambu contained an appreciable amount of protein (10.1‐10.7 per cent) and fat (2.2‐3.4 per cent). The moisture and ash contents were found to range from 35 to 38 per cent and 0.5 to 1.2 per cent, respectively; crude fibre ranged from 1.8 to 2.1 per cent; carbohydrate ranged from 45 to 49 per cent and the energy ranged from 247 to 264 kcal/100 g. The amino acid profiles of the dambu showed that the different dambu products contain both essential and non‐essential amino acids. The mineral contents were found to be high in potassium, phosphorus, calcium, zinc, and magnesium. The mean scores of aroma, chewiness, and overall acceptability for the products were not significantly different (p > 0.05) but difference existed in the texture and appearance.

The consumption of dambu from different cereal grains is encouraged; especially where a particular cereal is off season, the other grains could be used as a substitute and complementary.

The findings here suggested that dambu is necessary to cereal industry and baby foods (weaning foods).

The results of this research contribute to the knowledge of cereal meals, especially those that are indigenous to Nigeria and West Africa.

To enlighten the food consumers and drug users as to some of their incompatibilities.

Examples from the literature covering compositions of food‐drug, food‐drug interactions, and dietary habits were collected from former works.

Major side‐effects of some diet(food) on drugs include alteration in absorption by fatty, high protein and fiber diets. Drugs such as methateiate, pyrimethamine, isonicotinic acid and asprin alter the transportation of some nutrients. Nutrient supplementations was found to be beneficial.

Possible factors affecting the reactions need to be identified.

It helps food consumers and drug users to avoid using some of these materials and also to adopt nutrient supplementation as a better alternative where possible.

The knowledge helps food technologists, nutritionists, physicians and pharmacists to serve the public better.

The purpose of this paper was to evaluate the quality characteristics of white button mushroom powder enrichment in sponge cake. The developed product can be a promising inclusion in the convenience functional foods and would serve the purpose of improving nutritional status of consumers.

Cakes containing graded levels of agaricus bisporus (white button mushroom) powder were prepared by replacing wheat flour with 10, 20, 30, 40 and 50 per cent mushroom powder. The effect of mushroom powder supplementation on physical, nutritive and sensory quality of the cakes was evaluated and analyzed statistically using Agres-Agdata software.

Batter density and specific volume of cake samples decreased with increasing levels of mushroom powder in the formulation, which is contrary to the knowledge that they are inversely proportional. For 20 per cent enrichment, batter density and specific volume decreased by 8.23 and 5.79 per cent, respectively. There was no significant difference in individual organoleptic attributes of cake samples up to a level of 20 per cent fortification of mushroom powder, with significant nutrient enrichment (p > 0.05).

Replacing flour in cakes has been tried with many protein-rich ingredients to improve the nutritional quality of cake although with limiting success when it comes to sensorial acceptability. Mushroom powder was incorporated in the formulation to enrich sponge cakes. The processing technology will also reduce post-harvest losses in mushrooms and improve the nutritional status of society.

The purpose of this paper is to compare food utilization of quality protein maize (QPM) to other maize varieties.

Pap (ogi) – a maize starch porridge was prepared from QPM, tropical Zea mays early (TZE) and local maize (LM) using the traditional method. Physicochemical, microbiological and sensory analyses were carried out on the pap samples as indices of quality following standard methods.

The sensory evaluation preference rating for pap (ogi) prepared from QPM, TZE and LM varieties showed no significant difference (p < 0.05) in flavour, taste, colour and overall acceptability. Significant difference was however observed in the pH of the three products.

The findings suggested that QPM have the potential to replace other maize varieties as a staple diet and cheap source of quality protein.

This paper contributes knowledge to the fight against malnutrition and hunger, especially in the sub‐Saharan Africa.

This study aims to determine the probiotic potential of Lactobacillus rhamnosus GR-1 from Fiti sachets, in four widely consumed pulses, namely, black-eyed pea, pigeon pea, kabuli chickpea and desi chickpea. The secondary objective was to determine the viability of the fermented pulses during 21 days of storage at 4°C.

Each pulse sample was mixed with a Fiti sachet (one gram of freeze-dried consortium of Lactobacillus rhamnosus GR-1 and Streptococcus thermophilus C106) and fermented for up to 120 h. To assess the samples’ storage potential, they were refrigerated at 4°C for 21 days. Microbial enumerations and pH measurements were collected during fermentation and storage to determine the viability and fermentation potential of Lactobacillus rhamnosus GR-1 and Fiti, respectively.

There was a significant (p = 0.01) difference in mean microbial counts in all pulse samples throughout fermentation. At 24 h of fermentation, the mean bacterial count of Lactobacillus rhamnosus GR-1 in black-eyed pea, pigeon pea, kabuli chickpea and desi chickpea were 1.32 × 10⁹ ± 0.11, 1.01 × 10⁹ ± 0.16, 1.52 × 10⁹ ± 0.14 and 0.80 × 10⁹ ± 0.05 CFU/mL, respectively. Fermentation of pigeon pea, kabuli chickpea and desi chickpea at 48 h yielded the highest bacterial count for Lactobacillus rhamnosus GR-1 while black-eyed pea reached its highest bacterial count at 72 h of fermentation. The bacterial concentration of all pulse samples remained at around 10⁹ CFU/mL during the refrigeration period of 21 days at 4°C. Furthermore, the pH of all pulse samples were below 4.6 during both fermentation and refrigerated storage.

Since 2004, the Fiti initiative has economically empowered hundreds of women in East Africa by teaching them how to produce and sell probiotic yogurt containing Lactobacillus rhamnosus GR-1. As a result, Fiti probiotic yogurt was made accessible to vulnerable populations in East Africa who face malnutrition, infectious diseases and environmental toxins. Because of recent climatic changes, milk has become more expensive and inaccessible for local communities. Furthermore, this study found that black-eyed pea, pigeon pea, kabuli chickpea and desi chickpea can be viable and non-diary probiotic alternatives to the Fiti probiotic yogurt in Eastern Africa. This is also the first study of its kind to provide preliminary evidence showing pulses as non-dairy alternatives to Fiti probiotic yogurt.

Pearl millet (Pennisetum glaucum) is a rich source of nutrients as compared to the major cultivated cereal crops. However, major factors which limit its utilization are the presence of anti-nutritional factors (phytate, tannins and polyphenols) which lower availability of minerals and poor keeping quality because of higher lipase activity. Therefore, this paper aims to focus on the impact of different processing methods on the nutrient composition and anti-nutritional components of pearl millet.

This is a literature review study from 1983 to 2017, focusing on studies related to pearl millet processing and their effectiveness in the enrichment of nutritional value through reduction of anti-nutritional compounds.

From the literature reviewed, pearl millet processing through various methods including milling, malting, fermentation, blanching and acid as well as heat treatments were found to be effective in achieving the higher mineral digestibility, retardation of off flavor, bitterness as well as rancidity problems found during storage of flour.

Through this review paper, possible processing methods and their impact on the nutrient and anti-nutrient profile of pearl millet are discussed after detailed studied of literature from journal articles and thesis.

The aim of this paper is to promote the utilization and diversification of cashew nuts through its use as a substitute for wheat flour in biscuit production.

Wheat flour was substituted with cashew nut flour (CNF) at levels of 0, 20, 30 and 40 percent in the production of biscuit. The products obtained were subjected to proximate, mineral and sensory analysis.

There was a significant increase in protein and fat contents from 7.75 and 22.11 percent to 12.89 and 32.11 percent, respectively, when CNF increased, whiles carbohydrate decreased from 66.67 to 48.04 percent. A significant increase in magnesium (27.93-97.03 mg/100 g), sodium (198.11-228.02 mg/100 g), phosphorus (55.90-149.00 mg/100 g), potassium (290.40-990.00 mg/100 g), zinc (0.72-2.00 mg/100 g) and iron (0.28-1.00 mg/100 g) was also observed as CNF increased. Sensory analysis revealed that there was no significant difference (p>0.05) between the 20 and 30 percent substituted samples, in terms of overall acceptability. Therefore, wheat flour could be substituted with CNF up to 30 percent in the production of biscuit.

This study was done to ascertain the potential use of CNF as a substitute for wheat flour and a nutrient enrichment in biscuit production, in order to diversify its use; since it still remains an underutilized raw material in Ghana.

This paper aims to investigate the feasibility of adding macro-textures to triangle meshes for additive manufacturing (AM) focusing on possible time and quality issues in both software processing and part fabrication.

A demonstrative software tool was developed to apply user-selected textures to existing meshes. The computational procedure is a three-dimensional extension of the solid texturing method used in computer graphics. The tool was tested for speed and quality of results, considering also the pre- and post-processing operations required. Some textured meshes were printed by different processes to test build speed and quality.

The tool can handle models with realistic complexity in acceptable computation times. Parts are built without difficulties or extra-costs achieving a good aesthetic yield of the texture.

The tool cannot reproduce sample patterns but requires the development of a generation algorithm for different type of textures. Mesh processing operations may take a long time when very fine textures are added to large parts.

Direct texturing can help obtain parts with aesthetic or functional textures without the need for surface post-treatments, which can be especially difficult and expensive for plastic parts.

The proposed method improves the uniformity and consistency of textures compared to existing approaches, and can support future systematic studies on the detail resolution of AM processes.