Search results

The purpose of this paper is to present a novel sequential implicit discontinuous Galerkin (DG) method for two-phase incompressible flow in porous media. It is based on the wetting phase pressure-saturation formulation with Robin boundary condition (Klieber and Riviere, 2006) using H(div) velocity projection.

The local mass conservation and continuity of normal component of velocity across elements interfaces are enforced by a simple H(div) velocity projection in lowest order Raviart-Thomas (RT0) space. As further improvements, the authors use the weighted averages and the scaled penalties in spatial DG discretization. Moreover, the Chavent-Jaffre slope limiter, as a consistent non-oscillatory limiter, is used for saturation values to avoid the spurious oscillations.

The proposed model is verified by a pseudo 1D Buckley-Leverett problem in homogeneous media. Two homogeneous and heterogeneous quarter five-spot benchmark problems and a random permeable medium are used to show the accuracy of the method at capturing the sharp front and illustrate the impact of proposed improvements.

The work illustrates incompressible two-phase flow behavior and the capillary pressure heterogeneity between different geological layers is assumed to be negligible.

The proposed model can efficiently be used for modeling of two-phase flow in secondary recovery of petroleum reservoirs and tracing the immiscible contamination in porous media.

The authors present an efficient sequential DG method for immiscible incompressible two-phase flow in porous media with improved performance for detection of sharp frontal interfaces and discontinuities.

The purpose of this paper is to present an efficient improved version of Implicit Pressure-Explicit Saturation (IMPES) method for the solution of incompressible two-phase flow model based on the discontinuous Galerkin (DG) numerical scheme.

The governing equations, based on the wetting-phase pressure-saturation formulation, are discretized using various primal DG schemes. The authors use H(div) velocity reconstruction in Raviart-Thomas space (RT_0 and RT_1), the weighted average formulation, and the scaled penalties to improve the spatial discretization. It uses a new improved IMPES approach, by using the second-order explicit Total Variation Diminishing Runge-Kutta (TVD-RK) as temporal discretization of the saturation equation. The main purpose of this time stepping technique is to speed up computation without losing accuracy, thus to increase the efficiency of the method.

Utilizing pressure internal interpolation technique in the improved IMPES scheme can reduce CPU time. Combining the TVD property with a strong multi-dimensional slope limiter namely, modified Chavent-Jaffre leads to a non-oscillatory scheme even in coarse grids and highly heterogeneous porous media.

The presented locally conservative scheme can be applied only in 2D incompressible two-phase flow modeling in non-deformable porous media. In addition, the capillary pressure discontinuity between two adjacent rock types assumed to be negligible.

The proposed numerical scheme can be efficiently used to model the incompressible two-phase flow in secondary recovery of petroleum reservoirs and tracing immiscible contamination in aquifers.

The paper describes a novel version of the DG two-phase flow which illustrates the effects of improvements in special discretization. Also the new improved IMPES approach used reduces the computation time. The non-oscillatory scheme is an efficient algorithm as it maintains accuracy and saves computation time.

The purpose of this paper is to present detailed algorithms for simulation of individual and group control of production wells in hydrocarbon reservoirs which are implemented in a finite volume-based reservoir simulator.

The algorithm for individual control is described for the multi-lateral multi-connection ones based on the multi-segment model considering cross-flow. Moreover, a general group control algorithm is proposed which can be coupled with any well model that can handle a constraint and returns the flow rates. The performance of oil production process based on the group control criteria is investigated and compared for various cases.

The proposed algorithm for group control of production wells is a non-optimization iterative scheme converging within a few number of iterations. The numerical results of many computer runs indicate that the nominal power of the production wells, in general, is the best group control criterion for the proposed algorithm. The production well group control with a proper criterion can generally improve the oil recovery process at negligible computational costs when compared with individual control of production wells.

Although the group control algorithm is implemented for both production and injection wells in the developed simulator, the numerical algorithm is here described only for production wells to provide more details.

The proposed algorithm can be coupled with any well model providing the fluid flow rates and can be efficiently used for group control of production wells. In addition, the calculated flow rates of the production wells based on the group control algorithm can be used as candidate solutions for the optimizer in the simulation-optimization models. It may reduce the total number of iterations and consequently the computational cost of the simulation-optimization models for the well control problem.

A complete and detailed description of ingredients of an efficient well group control algorithm for the hydrocarbon reservoir is presented. Five group control criteria are extracted from the physical, geometrical and operating conditions of the wells/reservoir. These are the target rate, weighted potential, ultimate rate and introduced nominal power of the production wells. The performance of the group control of production wells with different group control criteria is compared in three different oil production scenarios from a black-oil and highly heterogeneous reservoir.

The aim of this paper is to develop simulation tools for the analysis of modified structures of distributed feedback (DFB) laser diodes adequate for single longitudinal mode (SLM) operation.

The paper uses matricial techniques: the transfer matrix method (TMM). When compared to the eigenvalue approach, the matricial techniques are more general and flexible and hence are especially adequate to deal with the analysis and structural design of DFB laser diodes. In this work, the author makes a general description of the TMM, enhancing its importance with some applications by considering the threshold and above‐threshold analysis of a modified DFB laser structure.

The increasing demands on laser performance, mainly in the area of optical communication systems, have lead to the fabrication of more‐and‐more complex structures. In viewing the development of the associated technology, the importance of the simulation tools revealed of crucial importance.

The simulation model used in this work has been described in other works of the author. In the present analysis a general description of the TMM was implemented, summarizing the results of previous studies for the threshold and above‐threshold regimes of modified DFB laser structures specially designed to show SLM operation.

The purpose of this paper is to propose a new optical steganography framework that can be applied to public optical binary phase-shift keying (BPSK) systems by transmitting a stealth spectrum-amplitude-coded optical code-division multiple-access signal through a BPSK link.

By using high-dispersion elements, the stealth data pulses temporally stretch and the amplitude of the signal decreases after stretching. Thus, the signal can be hidden underneath the public signal and system noise. At the receiver end, a polarizer is used for removing the public BPSK signal and the stealth signal is successfully recovered by a balanced detector.

In a simulation, the bit-error rate (BER) performance improved when the stealth power increased.

The BER performance worsens when the noise power become large. Future work will consider increasing the system performance during high-noise power situation.

By properly adjusting the power of the amplified spontaneous emission noise, the stealth signal can be hidden well in the public channel while producing minimal influence on the public BPSK signal.

In conclusion, the proposed optical steganography framework makes it more difficult for eavesdroppers to detect and intercept the hidden stealth channel under public transmission, even when using a dispersion compensation scheme.

This paper aims to introduce modeling, numerical simulation and convergence analysis of the problem of nanoparticles’ transport carried by a two-phase flow in a porous medium. The model consists of equations of pressure, saturation, nanoparticles’ concentration, deposited nanoparticles’ concentration on the pore-walls and entrapped nanoparticles concentration in pore-throats.

A nonlinear iterative IMPES-IMC (IMplicit Pressure Explicit Saturation–IMplicit Concentration) scheme is used to solve the problem under consideration. The governing equations are discretized using the cell-centered finite difference (CCFD) method. The pressure and saturation equations are coupled to calculate the pressure, and then the saturation is updated explicitly. Therefore, the equations of nanoparticles concentration, the deposited nanoparticles concentration on the pore walls and the entrapped nanoparticles concentration in pore throats are computed implicitly. Then, the porosity and the permeability variations are updated.

Three lemmas and one theorem for the convergence of the iterative method under the natural conditions and some continuity and boundedness assumptions were stated and proved. The theorem is proved by induction states that after a number of iterations, the sequences of the dependent variables such as saturation and concentrations approach solutions on the next time step. Moreover, two numerical examples are introduced with convergence test in terms of Courant–Friedrichs–Lewy (CFL) condition and a relaxation factor. Dependent variables such as pressure, saturation, concentration, deposited concentrations, porosity and permeability are plotted as contours in graphs, whereas the error estimations are presented in a table for different values of the number of time steps, number of iterations and mesh size.

The domain of the computations is relatively small; however, it is straightforward to extend this method to the oil reservoir (large) domain by keeping similar definitions of CFL number and other physical parameters.

The model of the problem under consideration has not been studied before. Also, both solution technique and convergence analysis have not been used before with this model.

Microstrip patch antenna is generally used for several communication purposes particularly in the military and civilian applications. Even though several techniques have been made numerous achievements in several fields, some systems require additional improvements to meet few challenges. Yet, they require application-specific improvement for optimally designing microstrip patch antenna. The paper aims to discuss these issues.

This paper intends to adopt an advanced meta-heuristic search algorithm called as grey wolf optimization (GWO), which is said to be inspired by the hunting behaviour of grey wolves, for the design of patch antenna parameters. The searching for the optimal design of the antenna is paced up using the opposition-based solution search. Moreover, the proposed model derives a nonlinear objective model to aid the design of the solution space of antenna parameters. After executing the simulation model, this paper compares the performance of the proposed GWO-based microstrip patch antenna with several conventional models.

The gain of the proposed model is 27.05 per cent better than WOAD, 2.07 per cent better than AAD, 15.80 per cent better than GAD, 17.49 per cent better than PSAD and 3.77 per cent better than GWAD model. Thus, it has proved that the proposed antenna model has attained high gain, leads to cause superior performance.

This paper presents a technique for designing the microstrip patch antenna, using the proposed GWO algorithm. This is the first work utilizes GWO-based optimization for microstrip patch antenna.

The material point method (MPM)is a particle-based numerical method suitable for solid–liquid simulation and large deformation problems. However, MPM is generally used in solid deformation at present, to develop a multi-physics coupling MPM; the purpose of this study is to extend the MPM to simulate the heat and fluid flow and address the thermal-hydrological (TH) coupling problems.

The porous medium was discretized into two sets of Lagrangian points, and the motion of fluid points follows the Darcy’s law. Two sets of heat transport equations were established for the heat conduction and heat exchange in the pore fluid and solid skeleton. Fractures were considered by adding the porosity gradient term in the governing equations; also a transition function was introduced to smoothen the fracture boundary.

Four cases of heat and fluid flow in porous medium and fractures were presented to verify the feasibility of the proposed method. And the effects of fractures on heat and fluid flow were investigated. Additionally, a case of geothermal extraction was solved and the importance of the interstitial convective heat transfer coefficient was analyzed.

The proposed method extends the conventional MPM, using two sets of material points and two sets of heat transport equations to simulate the heat and fluid flow and address the TH coupling problems, which can be applied in both porous medium and fractures.

The discontinuous Galerkin finite element method (DGFEM) is very suited for realizing high order resolution approximations on unstructured grids for calculating the hyperbolic conservation law. However, it requires a significant amount of computing resources. Therefore, this paper aims to investigate how to solve the Euler equations in parallel systems and improve the parallel performance.

Discontinuous Galerkin discretization is used for the compressible inviscid Euler equations. The multi-level domain decomposition strategy was used to deal with the computational grids and ensure the calculation load balancing. The total variation diminishing (TVD) Runge–Kutta (RK) scheme coupled with the multigrid strategy was employed to further improve parallel efficiency. Moreover, the Newton Block Gauss–Seidel (GS) method was adopted to accelerate convergence and improve the iteration efficiency.

Numerical experiments were implemented for the compressible inviscid flow problems around NACA0012 airfoil, over M6 wing and DLR-F6 configuration. The parallel acceleration is near to a linear convergence. The results indicate that the present parallel algorithm can reduce computational time significantly and allocate memory reasonably, which has high parallel efficiency and speedup, and it is well-suited to large-scale scientific computational problems on multiple instruction stream multiple data stream model.

The parallel DGFEM coupled with TVD RK and the Newton Block GS methods was presented for hyperbolic conservation law on unstructured meshes.

For this purpose, a linear stability analysis based on the Navier–Stokes and Maxwell equations is made leading to an eigenvalue differential equation of the modified Orr–Sommerfeld type which is solved numerically by the spectral collocation method based on Chebyshev polynomials. Unlike previous studies, blood is considered as a non-Newtonian fluid. The effects of various parameters such as volume fraction of nanoparticles, Casson parameter, Darcy number, Hartmann number on flow stability were examined and presented. This paper aims to investigate a linear stability analysis of non-Newtonian blood flow with magnetic nanoparticles with an application to controlled drug delivery.

Targeted delivery of therapeutic agents such as stem cells and drugs using magnetic nanoparticles with the help of external magnetic fields is an emerging treatment modality for many diseases. To this end, controlling the movement of nanoparticles in the human body is of great importance. This study investigates controlled drug delivery by using magnetic nanoparticles in a porous artery under the influence of a magnetic field.

It was found the following: the Casson parameter affects the stability of the flow by amplifying the amplitude of the disturbance which reflects its destabilizing effect. It emerges from this study that the taking into account of the non-Newtonian character is essential in the modeling of such a system, and that the results can be very different from those obtained by supposing that the blood is a Newtonian fluid. The presence of iron oxide nanoparticles in the blood increases the inertia of the fluid, which dampens the disturbances. The Strouhal number has a stabilizing effect on the flow which makes it possible to say that the oscillating circulation mechanisms dampen the disturbances. The Darcy number affects the stability of the flow and has a stabilizing effect, which makes it possible to increase the contact surface between the nanoparticles and the fluid allowing very high heat transfer rates to be obtained. It also emerges from this study that the presence of the porosity prevents the sedimentation of the nanoparticles. By studying the effect of the magnetic field on the stability of the flow, it is observed that the Hartmann number keeps the flow completely stable. This allows saying that the magnetic field makes the dissipations very important because the kinetic energy of the electrically conductive ferrofluid is absorbed by the Lorentz force.

The originality of this paper resides on the application of the linear stability analysis for controlled drug delivery.