Search results

This paper aims to solve the problem that strong noise interference seriously affects the direction of arrival (DOA) estimation in complex underwater acoustic environment. In this paper, a combined noise reduction algorithm and micro-electro-mechanical system (MEMS) vector hydrophone DOA estimation algorithm based on singular value decomposition (SVD), variational mode decomposition (VMD) and wavelet threshold denoising (WTD) is proposed.

Firstly, the parameters of VMD are determined by SVD, and the VMD method can decompose the signal into multiple intrinsic mode functions (IMFs). Secondly, the effective IMF component is determined according to the correlation coefficient criterion and the IMF less than the threshold is processed by WTD. Then, reconstruction is carried out to achieve the purpose of denoising and calibration baseline drift. Finally, DOA estimation is achieved by the combined directional algorithm of preprocessed signal.

Simulation and field experiments results show that the algorithm has good noise reduction and baseline drift correction effects for nonstationary underwater signals, and high-precision azimuth estimation is realized.

This research provides the basis for MEMS hydrophone detection and positioning and has great engineering significance in underwater detection system.

This paper aims to address the challenges in hydroacoustic signal detection, signal distortion and target localization caused by baseline drift. The authors propose a combined algorithm that integrates short-time Fourier transform (STFT) detection, smoothness priors approach (SPA), attitude calibration and direction of arrival (DOA) estimation for micro-electro-mechanical system vector hydrophones.

Initially, STFT method screens target signals with baseline drift in low signal-to-noise ratio environments, facilitating easier subsequent processing. Next, SPA is applied to the screened target signal, effectively removing the baseline drift, and combined with filtering to improve the signal-to-noise ratio. Then, vector channel amplitudes are corrected using attitude correction with 2D compass data. Finally, the absolute target azimuth is estimated using the minimum variance distortion-free response beamformer.

Simulation and experimental results demonstrate that the SPA outperforms high-pass filtering in removing baseline drift and is comparable to the effectiveness of variational mode decomposition, with significantly shorter processing times, making it more suitable for real-time applications. The detection performance of the STFT method is superior to instantaneous correlation detection and sample entropy methods. The final DOA estimation achieves an accuracy within 2°, enabling precise target azimuth estimation.

To the best of the authors’ knowledge, this study is the first to apply SPA to baseline drift removal in hydroacoustic signals, significantly enhancing the efficiency and accuracy of signal processing. It demonstrates the method’s outstanding performance in the field of underwater signal processing. In addition, it confirms the reliability and feasibility of STFT for signal detection in the presence of baseline drift.

Ciliated microelectromechanical system (MEMS) vector hydrophones pick up sound signals through Wheatstone bridge in cross beam-ciliated microstructures to achieve information transmission. This paper aims to overcome the complexity and variability of the marine environment and achieve accurate location of targets. In this paper, a new method for ocean noise denoising based on improved complete ensemble empirical mode decomposition with adaptive noise combined with wavelet threshold processing method (CEEMDAN-WT) is proposed.

Based on the CEEMDAN-WT method, the signal is decomposed into different intrinsic mode functions (IMFs), and relevant parameters are selected to obtain IMF denoised signals through WT method for the noisy mode components with low sample entropy. The final pure signal is obtained by reconstructing the unprocessed mode components and the denoising component, effectively separating the signal from the wave interference.

The three methods of empirical mode decomposition (EMD), ensemble empirical mode decomposition (EEMD) and CEEMDAN are compared and analyzed by simulation. The simulation results show that the CEEMDAN method has higher signal-to-noise ratio and smaller reconstruction error than EMD and EEMD. The feasibility and practicability of the combined denoising method are verified by indoor and outdoor experiments, and the underwater acoustic experiment data after processing are combined beams. The problem of blurry left and right sides is solved, and the high precision orientation of the target is realized.

This algorithm provides a theoretical basis for MEMS hydrophones to achieve accurate target positioning in the ocean, and can be applied to the hardware design of sonobuoys, which is widely used in various underwater acoustic work.

Human-induced marine environmental noise, such as commercial shipping and seismic exploration, is concentrated in the low-frequency range. Meanwhile, low-frequency sound signals can achieve long-distance propagation in water. To meet the requirements of long-distance underwater detection and communication, this paper aims to propose an micro-electro-mechanical system (MEMS) flexible conformal hydrophone for low-frequency underwater acoustic signals. The substrate of the proposed hydrophone is polyimide, with silicon as the piezoresistive unit.

This paper proposes a MEMS heterojunction integration process for preparing flexible conformal hydrophones. In addition, sensors prepared based on this process are non-contact flexible sensors that can detect weak signals or small deformations.

The experimental results indicate that making devices with this process cannot only achieve heterogeneous integration of silicon film, metal wire and polyimide, but also allow for customized positions of the silicon film as needed. The success rate of silicon film transfer printing is over 95%. When a stress of 1 Pa is applied on the x-axis or y-axis, the maximum stress on Si as a pie-zoresistive material is above, and the average stress on the Si film is around.

The flexible conformal vector hydrophone prepared by heterogeneous integration technology provides ideas for underwater acoustic communication and signal acquisition of biomimetic flexible robotic fish.

The problem of port and starboard ambiguity will exist when only utilize the vector or scalar parameters. Meanwhile, the amplitude-phase error between the vector and scalar can also cause this problem. In this paper, a compound MEMS vector hydrophone which contains cilia vector microstructure and piezoelectric ceramic tube has been presented to solve the problem. Compared with traditional MEMS vector hydrophone, the compound MEMS vector hydrophone can realize the measurement of sound pressure and vibration velocity simultaneously.

A compound MEMS vector hydrophone has been presented. The unipolar directivity of the combined signal which combine the acoustic pressure and vibration velocity is used to achieve the direction of arrival (DOA). This paper introduced the working principle and the target detection mechanism of the compound vector hydrophone. The amplitude and phase error are analyzed and corrected in the standing wave tube. After that, the authors use beam-forming algorithm to estimate the DOA.

The experimental results in the standing wave tube and the external field verified the vector hydrophone's directional accuracy up to 1 and 5 degrees, respectively.

The research of compound vector hydrophone plays an important role in marine acoustic exploration and engineering applications.

This research provides a basis for MEMS hydrophone directivity theory. The compound vector hydrophone has been applied in the underwater location, with a huge market potential in underwater detection systems.

This paper aims to solve the problems of baseline drift, susceptibility to abnormal data interference during baseline drift processing, and phase inconsistency in underwater acoustic target detection and signal processing of single microelectromechanical systems (MEMS) vector hydrophone. To this end, this paper proposes a baseline drift removal algorithm based on Huber regression model with B-spline interpolation (H-BS) and a phase compensation algorithm based on the Hilbert transform.

First, the Huber regression model is innovatively introduced into the conventional B-spline interpolation (B-spline) to solve the control point vectors more accurately and to improve the anti-interference ability of the abnormal data when the B-spline interpolation fitting removes baseline drift and the baseline drift components in the signals are fitted accurately and removed by the above method. Next, the Hilbert transform is applied to the three-channel output signals of the MEMS vector hydrophone to calculate the instantaneous phase and the phase compensation is performed on the vector X/Y signals with the scalar P signal as the reference.

Through simulation experiments, it is found that H-BS proposed in this paper has smaller processing error and better robustness than variational modal decomposition and B-spline, but the H-BS algorithm takes slightly longer than the B-spline. In the actual lake test experiments, the H-BS algorithm can effectively remove the baseline drift component in the original signal and restore the signal waveform, and after the Hilbert transform phase compensation, the direction of arrival estimation accuracy of the signal is improved by 1°∼2°, which realizes high-precision orientation to the acoustic source target.

In this paper, the Huber regression model is introduced into B-spline interpolation fitting for the first time and applied in the specialized field of hydroacoustic signal baseline drift removal. Meanwhile, the Hilbert transform is applied to phase compensation of hydroacoustic signals. After simulation and practical experiments, these two methods are verified to be effective in processing hydroacoustic signals and perform better than similar methods. This study provides a new research direction for the signal processing of MEMS vector hydrophone, which has important practical engineering application value.

In acoustic detection technology, optical microcavities offer higher detection bandwidth and sensitivity than traditional acoustic sensors. However, research on acoustic detection technologies involving optical microcavities has not yet been reported. Therefore, this paper aims to design and construct an underwater acoustic detection system based on optical microcavities and study its acoustic detection technology to improve its performance.

Based on the principles of optical microcavity acoustic sensors, a signal-detection circuit was designed to form a detection system in conjunction with a laser, an optical waveguide resonator and an oscilloscope. This circuit consists of two modules: a photodetection module and a filter amplification module.

The photodetection module features a baseline noise of −106.499 dBm and can detect device spectral line depths of up to 2410 mV. The gain stability of the filter amplification module was 58 dB ± 1 dB with a noise gain of −107.626 dBm. This design allows the acoustic detection system to detect signals with high sensitivity within the 10 Hz−1.2 MHz frequency band, achieving a maximum sensitivity of −126 dB re 1 V/µPa at 800 Hz and a minimum detectable pressure (MDP) of 0.37 mPa/Hz^1/2, corresponding to a noise equivalent pressure (NEP) of 51.36 dB re 1 V/µPa.

This study designs and constructs a broadband underwater acoustic detection system specifically for optical waveguide resonators based on the sensing principles of silicon dioxide optical waveguide resonators. Experiments demonstrated that the signal detection module improves the sensitivity of underwater acoustic detection based on optical waveguides.

The purpose of this paper is to propose a smooth double-spline interpolation method for six-degree-of-freedom rotational robot manipulators, achieving the global C2 continuity of the robot trajectory.

This paper presents a smooth double-spline interpolation method, achieving the global C2 continuity of the robot trajectory. The tool center positions and quaternion orientations are first fitted by a cubic B-spline curve and a quartic-polynomial-based quaternion spline curve, respectively. Then, a parameter synchronization model is proposed to realize the synchronous and smooth movement of the robot along the double spline curves. Finally, an extra u-s function is used to record the relationship between the B-spline parameter and its arc length parameter, which may reduce the feed rate fluctuation in interpolation. The seven segments jerk-limited feed rate profile is used to generate motion commands for algorithm validation.

The simulation and experimental results demonstrate that the proposed method is effective and can generate the global C2-continuity robot trajectory.

The main contributions of this paper are as follows: guarantee the C2 continuity of the position path and quaternion orientation path simultaneously; provide a parameter synchronization model to realize the synchronous and smooth movement of the robot along the double spline curves; and add an extra u-s function to realize arc length parameterization of the B-spline path, which may reduce the feed rate fluctuation in interpolation.

The purpose of this paper is to transfer the impedance regulation of manual belt grinding to robot belt grinding control.

This paper presents a novel methodology for transmitting human impedance regulation skills to robot control in robot belt grinding. First, according to the human grinding experimental data, the skilled worker’s arm impedance regulation is calculated. Next, the human skills are encapsulated as the statistical learning model where the kernel parameters are learned from the demonstration data by Gaussian process regression (GPR) algorithms. The desired profiles of robot are generated by the task planner based on the learned skill knowledge model. Lastly, the learned skill knowledge model is integrated with an adaptive hybrid position-force controller over the trajectory and force of end-effector in robot belt grinding task.

Manual grinding skills are represented and transferred to robot belt grinding for higher grinding quality of the workpiece.

The impedance of the manual grinding is estimated by k-means++ algorithm at different grinding phases. Manual grinding skills (e.g. trajectory, impedance regulation) are represented and modeled by GMM and GPR algorithms. The desired trajectory, force and impedance of robot are generated by the planner based on the learned skills knowledge model. An adaptive hybrid position-force controller is designed based on learned skill knowledge model. This paper proposes a torque-tracking controller to suppress the vibration in robot belt grinding process.

The purpose of this paper is to present a novel nitrile butadiene rubber (NBR) packaging structure, which can solve the problems of the low sensitivity, narrow frequency band and fluctuating frequency response curve of the MEMS bionic vector hydrophone.

A 0.05-mm-thick NBR sound-transparent cap was designed by theoretical analysis and simulation to reduce the signal attenuation caused by the packaging structure, and the frequency band of the hydrophone has been extended to 4 kHz. In this work, the vector hydrophone was fabricated by the MEMS technology and packaged with the NBR sound-transparent cap. The performance indicators were calibrated in the National Defence Underwater Acoustics Calibration Laboratory of China.

The results show that the sensitivity of NBR-packaged hydrophone reaches −170 dB (±2 dB), and the difference is less than 1 dB compared to bare chip. And the frequency band is 50 Hz-4 kHz. The hydrophone also has good directional pattern in the form of an 8-shape, and the pressure-resisting ability is more than 2 MPa.

The packaging structure significantly increases the sensitivity of the hydrophone and broadens the frequency band, providing a new method in the packaging design for MEMS hydrophone.