Search results

The purpose of this paper is to research the traditional belief‐propagation (BP) decoding algorithm of low‐density parity‐check code. The big computation load is a shortcoming of traditional BP decoding algorithm. Accordingly, the paper provides an improved BP decoding algorithm which raises the decoding efficiency and reduces decoding time delay.

An improved BP decoding algorithm is studied and the error correction performance of the improved BP decoding algorithm in the Gaussian channel is provided.

The simulation result shows the improved BP decoding algorithm has lower computational complexity and higher decoding speed based on the premise of a little decoding performance loss.

The improved BP decoding algorithm has lower computational complexity and higher decoding speed based on the premise of a little decoding performance loss.

The improved BP decoding algorithm raises the decoding efficiency and reduces decoding time delay.

The decoding algorithm only needs to update the wrong bit information which might arise, but not update the bit information whose reliability is very high. The improved BP decoding algorithm raises the decoding efficiency and reduces decoding time delay.

This research aims to use meta-analytical structural equation modeling to look into how hospitality employees use technology at work. It further investigates if the relationship between the constructs of the technology acceptance model (TAM) is moderated by job level (supervisory versus non-supervisory) and different cultures (eastern versus western).

In total, 140 relationships from 30 empirical studies (N = 6,728) were used in this study’s data analysis in accordance with the preferred reporting items for systematic reviews and meta-analysis.

The findings demonstrated that perceived usefulness had a greater influence on “user attitudes” and “acceptance intention” than perceived ease of use. This study also identified that the effect sizes of relationships among TAM constructs appeared to be greater for supervisory employees or in eastern cultures than for those in non-supervisory roles or western cultures.

The findings provide valuable information for practitioners to increase the adoption of employee technology. Practitioners need to focus on the identification of hospitality employee attitudes, social norms and perceived ease of use. Moreover, hospitality practitioners should be cautious when promoting the adoption of new technologies to employees, as those at different levels may respond differently.

This is the very first empirical investigation to meta-analyze the predictive power of the TAM in the context of hospitality staff technology adoption at the workplace. The findings also demonstrated differences in the predictive power of TAM constructs according to job level and cultural differences.

The purpose of this paper is to propose a strategy for the final assembly of helicopter fuselage with weak rigidity parts and mismatched jointing butt ends.

The strategy is based on path planning methods. Compared with traditional path planning methods, the configuration-space and collision detection in the method are different. The obstacles in the configuration-space are weakly rigid and allow continuous contact with the robot. The collision detection is based on interference magnitudes, and the result is divided into no collision, weak collision and strong collision. Only strong collision is unacceptable. Then a compliant jointing path planning algorithm based on RRT is designed, combined with some improvements in search efficiency.

A series of planning results show that the efficiency of this method is higher than original RRT under the same conditions. The effectiveness of the method is verified by a series of simulations and experiments on two sets of systems.

There are few reports on the automation technology of helicopter fuselage assembly. This paper analyzes the problem and provides a solution from the perspective of path planning. This method contains a new configuration-space and collision detection method adapted to this problem and could be intuitive for the jointing of other weakly rigid parts.

Besides ensuring traditional project objectives, expatriate construction professionals (EXCPs) working on international projects face challenges adapting to unfamiliar environments with varying construction standards, work practices and cultural values. This puts them at a high risk of job burnout. Thus, this study aims to investigate the antecedents and outcomes of EXCPs' job burnout in the international construction industry.

Based on the Job demands-resource model (JD-R), a theoretical framework was developed. Industry-specific stressors and expatriate management practices were identified using a literature review and interviews. The authors then used a questionnaire survey to collect data from Chinese EXCPs. Exploratory factor analysis, confirmatory factor analysis and structural equation modeling were then utilized to test hypotheses.

The findings indicate that early-career EXCPs experience the most severe levels of job burnout. The paths analysis proved the direct and indirect mitigating effects of expatriate management practices on job burnout, and EXCP's job burnout was associated with poor job performance and decreased intention to stay in the international assignment.

While prior research has explored job burnout among construction professionals working on domestic projects, little attention has been given to EXCPs and their unique challenges. This study aims to fill this critical gap in the literature by offering a unique perspective on the antecedents and outcomes of job burnout among EXCPs in international contexts and presents a significant contribution to understanding and addressing occupational health issues faced by EXCPs.

Young construction project management practitioners (CPMPs) have unique, complex, and notable occupational mental health problems. However, there were few studies about the intervention for occupational mental health of CPMPs, and traditional intervention modes often failed to achieve significant effects. Therefore, this study aims to propose a new and effective intervention method.

Job crafting intervention was used to design an intervention experiment. A total of 72 CPMPs participated in a 10-week randomized controlled trial in China. Descriptive statistics and repeated measures analysis of variance were used to verify the effectiveness of job crafting intervention (JCI) on job crafting behaviors, job burnout, and work engagement with consideration of the impact of time.

Results showed that the intervention increased social resources, thus effectively reducing job burnout and promoting work engagement. Time also had a significant impact on cynicism, dedication, and social resources.

The authors should promote the habit of job crafting in CPMPs. Furthermore, in order to facilitate their job crafting, the authors should increase structural and social resources for them, and the authors can also encourage them to undertake challenging demands to increase their self-efficacy and the sense of achievement.

The authors bring into light a new psychological intervention approach among CPMPs, which integrates the advantages of the guidance in traditional organized intervention methods and the proactivity in individual spontaneous job crafting. The authors verify the efficacy of the JCI among CPMPs and help propose countermeasures and suggestions to improve the occupational mental health of CPMPs.

The purpose of this paper is to describe the fabrication and characterization of poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyexanoate] (PHBHHx) tissue engineering scaffolds with anatomical shape and customized porous structure.

Scaffolds with external shape and size modeled on a critical size segment of a rabbit’s radius model and an internal macrochanneled porous structure were designed and fabricated by means of a computer-aided wet-spinning (CAWS) technique. Morphological, thermal and mechanical characterization were carried out to assess the effect of the fabrication process on material properties and the potential of the PHBHHx scaffolds in comparison with anatomical star poly(e-caprolactone) (*PCL) scaffolds previously validated in vivo.

The CAWS technique is well suited for the layered manufacturing of anatomical PHBHHx scaffolds with a tailored porous architecture characterized by a longitudinal macrochannel. Morphological analysis showed that the scaffolds were composed by overlapping layers of microfibers with a spongy morphology, forming a 3D interconnected network of pores. Physical-chemical characterization indicated that the used technique did not affect the molecular structure of the processed polymer. Analysis of the compressive and tensile mechanical properties of the scaffolds highlighted the anisotropic behavior of the porous structure and the effect of the macrochannel in enhancing scaffold compressive stiffness. In comparison to the *PCL scaffolds, PHBHHx scaffolds showed higher compressive stiffness and tensile deformability.

This study shows the possibility of using renewable microbial polyester for the fabrication of scaffolds with anatomical shape and internal architecture tailored for in vivo bone regeneration studies.

With the rise in international construction projects, addressing the psychological health concerns of expatriate construction professionals (EXCPs) has become of paramount importance. Therefore, this study aims to identify and evaluate effective intervention measures to promote optimal psychological health and well-being in overseas working environments.

Intervention measures were identified through a comprehensive literature review. Subsequently, using a case study of Chinese international contractors, data were collected via a quantitative survey administered to EXCPs holding managerial positions in international construction projects. Fuzzy synthetic evaluation was employed to analyze the data.

The findings identified 23 intervention measures and 4 constructs, among them, measures focused on enhancing organizational justice and training practices offer the greatest potential for enhancing the psychological health and well-being during international assignments. Furthermore, the analysis showed that the overall criticality of the intervention measures to the international contractors is significant, suggesting that if put into practice, the psychological health and well-being of EXCPs can be significantly enhanced.

While prior research has explored intervention measures suitable for construction professionals working on domestic projects, little attention has been paid to EXCPs in the context of international construction projects. This study offers an initial exploration of the most crucial intervention measures and provides a valuable resource for policymakers and practitioners seeking to establish a psychologically healthy working environment for international construction projects.