Amruta Rout, Golak Bihari Mahanta, Bibhuti Bhusan Biswal, Renin Francy T., Sri Vardhan Raj and Deepak B.B.V.L.
The purpose of this study is to plan and develop a cost-effective health-care robot for assisting and observing the patients in an accurate and effective way during pandemic…
Abstract
Purpose
The purpose of this study is to plan and develop a cost-effective health-care robot for assisting and observing the patients in an accurate and effective way during pandemic situation like COVID-19. The purposed research work can help in better management of pandemic situations in rural areas as well as developing countries where medical facility is not easily available.
Design/methodology/approach
It becomes very difficult for the medical staff to have a continuous check on patient’s condition in terms of symptoms and critical parameters during pandemic situations. For dealing with these situations, a service mobile robot with multiple sensors for measuring patients bodily indicators has been proposed and the prototype for the same has been developed that can monitor and aid the patient using the robotic arm. The fuzzy controller has also been incorporated with the mobile robot through which decisions on patient monitoring can be taken automatically. Mamdani implication method has been utilized for formulating mathematical expression of M number of “if and then condition based rules” with defined input Xj (j = 1, 2, ………. s), and output yi. The inputs and output variables are formed by the membership functions µAij(xj) and µCi(yi) to execute the Fuzzy Inference System controller. Here, Aij and Ci are the developed fuzzy sets.
Findings
The fuzzy-based prediction model has been tested with the output of medicines for the initial 27 runs and was validated by the correlation of predicted and actual values. The correlation coefficient has been found to be 0.989 with a mean square error value of 0.000174, signifying a strong relationship between the predicted values and the actual values. The proposed research work can handle multiple tasks like online consulting, continuous patient condition monitoring in general wards and ICUs, telemedicine services, hospital waste disposal and providing service to patients at regular time intervals.
Originality/value
The novelty of the proposed research work lies in the integration of artificial intelligence techniques like fuzzy logic with the multi-sensor-based service robot for easy decision-making and continuous patient monitoring in hospitals in rural areas and to reduce the work stress on medical staff during pandemic situation.
Details
Keywords
Golak Bihari Mahanta, Deepak BBVL, Bibhuti B. Biswal and Amruta Rout
From the past few decades, parallel grippers are used successfully in the automation industries for performing various pick and place jobs due to their simple design, reliable…
Abstract
Purpose
From the past few decades, parallel grippers are used successfully in the automation industries for performing various pick and place jobs due to their simple design, reliable nature and its economic feasibility. So, the purpose of this paperis to design a suitable gripper with appropriate design parameters for better performance in the robotic production systems.
Design/methodology/approach
In this paper, an enhanced multi-objective ant lion algorithm is introduced to find the optimal geometric and design variables of a parallel gripper. The considered robotic gripper systems are evaluated by considering three objective functions while satisfying eight constraint equations. The beta distribution function is introduced for generating the initial random number at the initialization phase of the proposed algorithm as a replacement of uniform distribution function. A local search algorithm, namely, achievement scalarizing function with multi-criteria decision-making technique and beta distribution are used to enhance the existing optimizer to evaluate the optimal gripper design problem. In this study, the newly proposed enhanced optimizer to obtain the optimum design condition of the design variables is called enhanced multi-objective ant lion optimizer.
Findings
This study aims to obtain optimal design parameters of the parallel gripper with the help of the developed algorithms. The acquired results are investigated with the past research paper conducted in that field for comparison. It is observed that the suggested method to get the best gripper arrangement and variables of the parallel gripper mechanism outperform its counterparts. The effects of the design variables are needed to be studied for a better design approach concerning the objective functions, which is achieved by sensitivity analysis.
Practical implications
The developed gripper is feasible to use in the assembly operation, as well as in other pick and place operations in different industries.
Originality/value
In this study, the problem to find the optimum design parameter (i.e. geometric parameters such as length of the link and parallel gripper joint angles) is addressed as a multi-objective optimization. The obtained results from the execution of the algorithm are evaluated using the performance indicator algorithm and a sensitivity analysis is introduced to validate the effects of the design variables. The obtained optimal parameters are used to develop a gripper prototype, which will be used for the assembly process.
Details
Keywords
Amruta Rout, Deepak Bbvl, Bibhuti B. Biswal and Golak Bihari Mahanta
This paper aims to propose fuzzy-regression-particle swarm optimization (PSO) based hybrid optimization approach for getting maximum weld quality in terms of weld strength and…
Abstract
Purpose
This paper aims to propose fuzzy-regression-particle swarm optimization (PSO) based hybrid optimization approach for getting maximum weld quality in terms of weld strength and bead depth of penetration.
Design/methodology/approach
The prediction of welding quality to achieve best of it is not possible by any single optimization technique. Therefore, fuzzy technique has been applied to predict the weld quality in terms of weld strength and weld bead geometry in combination with a multi-performance characteristic index (MPCI). Then regression analysis has been applied to develop relation between the MPCI output value and the input welding process parameters. Finally, PSO method has been used to get the optimal welding condition by maximizing the MPCI value.
Findings
The predicted weld quality or the MPCI values in terms of combined weld strength and bead geometry has been found to be highly co-related with the weld process parameters. Therefore, it makes the process easy for setting of weld process parameters for achieving best weld quality, as there is no need to finding the relation for individual weld quality parameter and weld process parameters although they are co-related in a complicated manner.
Originality/value
In this paper, a new hybrid approach for predicting the weld quality in terms of both mechanical properties and weld geometry and optimizing the same has been proposed. As these parameters are highly correlated and dependent on the weld process parameters the proposed approach can effectively analyzing the ambiguity and significance of each process and performance parameter.
Details
Keywords
Amruta Rout, Deepak BBVL, Bibhuti B. Biswal and Golak Bihari Mahanta
The purpose of this paper is to improve the positional accuracy, smoothness on motion and productivity of industrial robot through the proposed optimal joint trajectory planning…
Abstract
Purpose
The purpose of this paper is to improve the positional accuracy, smoothness on motion and productivity of industrial robot through the proposed optimal joint trajectory planning method. Also a new improved algorithm, i.e. non-dominated sorting genetic algorithm-II (NSGA-II) with achievement scalarizing function (ASF) has been proposed to obtain better optimal results compared to previously used optimization methods.
Design/methodology/approach
The end effector positional errors can be reduced by limiting the uncertainties of dynamic parameter variations like torque rate of joints. The jerk induced in robot joints due to acceleration variations are need to be minimized which otherwise induces vibrations in the manipulator that causes deviation in the encoders. But these lead to a vast increase in total travel time which affects the cost function of trajectory planning. Therefore, these three objectives need to be minimized individually so that an optimal trajectory path can be achieved with minimum positional error.
Findings
The simulation results have been obtained by running the proposed hybrid NSGA-II with ASF in MATLAB R2017a software. The optimal time intervals have been used to calculate jerk, acceleration and torque values for consecutive points on the trajectory path. From the simulation and experimental results, it can be concluded that the optimization technique could be used effectively for the trajectory planning of six-axis industrial manipulator in the joint space on the basis of minimum time-jerk-torque rate criteria.
Originality/value
In this paper, a new approach based on hybrid multi-objective optimization technique by combining NSGA-II with ASF has been applied to find the minimal time-jerk- torque rate joint trajectory of a six-axis industrial robot for obtaining higher positional accuracy. The results obtained from the execution of algorithm have been validated through experimentation using Kawasaki RS06L industrial robot for a particular defined path.