Search results

Three-dimensional (3D) casting means using additive manufacturing (AM) techniques to print the mould for casting the cast tool. The printed mould, however, should be checked for its dimensional accuracy. 3D scanning can be used for the same. The purpose of this study is to combine the different AM techniques for 3D casting with 3D scanning to produce parts with close tolerance for preparing electrical discharge machining (EDM) electrodes.

The four processes, namely, stereolithography, selective laser sintering, fused deposition modelling and vacuum casting, are used to print the casting mould. The mould is designed in two halves, assembled to form a complete mould. The mould is 3D scanned in two stages: before and after using it as a casting mould. The mould's average and maximum dimensional deviations are calculated using 3D-scanned results. The eutectic Sn-Bi alloy is cast in the mould. The surface roughness of the mould and the cast tool are measured.

The cast tool is selected from the four processes in terms of dimensional accuracy and surface finish. The same is electroplated with copper. The microstructure of the cast tool (low-melting-point alloy) and deposited copper is analysed using a scanning electron microscope. Energy dispersive spectroscopy and X-ray diffraction techniques are used to verify the composition of the cast and coated alloy. The electroplated tool is finally tested on the EDM setup. The material removal rate and tool wear are measured. The performance is compared with a solid copper tool. The free-form customised EDM mould is also prepared, and the profile is cast out. The same is tested on the EDM. Thus, the developed path can be successfully used for rapid tooling applications.

The eutectic composition of Sn-Bi is cast in the 3D-printed mould using different AM techniques combined with 3D scanning quality to check its feasibility as an EDM electrode, which is a novel work and has not been done previously.

Central Scotland has been successful in replacing many of its traditional industries with a network of over 300 electronics manufacturers and suppliers creating the area popularly known as “Silicon Glen”. Silicon Glen appears to be a very suitable site for the implementation of just‐in‐time (JIT) production systems with both electronics manufacturers and suppliers concentrated in the same geographical area. Contrasts the theory and practice of JIT implementation in “Silicon Glen” and assesses its success in six companies currently operating JIT production systems. The main conclusion is that JIT has been implemented in a variety of forms, with companies selecting the aspects of JIT that are most suitable for their manufacturing process and competitive strategy. JIT is proving highly successful and is bringing substantial gains in quality and efficiency.

Describes the developments of a small, robust ultrasonic wind speed and direction indicator. Gill’s patented ultrasonic technology is based on the time‐of‐flight operating principle, which provides vector measurement of air velocity, given the dimensions and geometry of pairs of transducers. In this case, two pairs of transducers are used such that the air velocity can be derived along orthogonal axes and hence the air speed and direction can be computed.

This explorative paper is based on the professional career of Councillor Gill Sargeant who completed her term of office as Mayor of the London Borough of Barnet, in May 2001. This paper chronicles the life of a twenty‐first century woman living and working in a “digitally” lead age, faced with the challenges of a traditional business environment. The paper also identifies the impact of key “drivers” and “barriers” to the development of women's careers such as, childcare responsibilities, technology, gender stereotypes and family friendly policies, as faced by a modern day Mayor.

This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming and powder metallurgy are briefly discussed. The range of applications of finite elements on the subjects is extremely wide and cannot be presented in a single paper; therefore the aim of the paper is to give FE users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An appendix included at the end of the paper presents a bibliography on finite element applications in material processing for the last five years, and more than 1100 references are listed.

A new range of high‐speed hydraulic presses, known as R‐G, has been designed and built for Dowding & Doll Ltd., 346 Kensington High Street, London, W.14 by Rhodes, Gill & Co. Ltd.

To relieve intracranial pressure and save patient inflicted with severe head injury, neurosurgeons restore cranial defects. These defects can be caused because of trauma or diseases (Osteomyelitis of bone) which are treated by cranioplasty, using the preserved bone of patient. In case of non-availability of bone, a cranial implant is generated using a biocompatible synthetic material, but this process is less accurate and time-consuming. Hence, this paper aims to present the use of rapid prototyping technology that allows the development of a more accurate patient-specific template and saves the surgery time.

A five-year-old girl patient having cranial defect was taken up for cranioplasty. CT (computed tomography) scans of the patient were used to generate 3D design of the implant suitable to conceal the defect on the left frontal portion using CAD/CAM (computer-aided design/ computer-aided manufacturing) software. The design was used for 3D printing to manufacture a base template, which was finally used to fabricate the actual implant using Simplex® P bone cement material to conceal the defect.

Surgery using Simplex® P implant was performed successfully on the patient, giving precise natural curvature to left frontal portion of the patient, decreasing surgery time by about 30 per cent.

The case demonstrates the development of a convenient, time-saving and aesthetically superior digital procedure to treat cranial defect in the absence of preserved bone flap using CT scan as input. 3D modelling and printing were deployed to produce an accurate template which was used to generate an implant using bone cement biocompatible material.

This study aims to examine the effects on student motivation and perception of technological interventions within undergraduate mechanical engineering and product design and manufacture programs at a Sino-foreign international university. The authors use an augmented reality game application within a class on Design for Manufacturing and Assembly (DfMA) that was developed using the approaches of microlearning and digital game-based learning (DGBL).

Structured as design-based research, the study reports on developing innovative educational interventions and provides an empirical investigation of their effectiveness. Data were collected using a mixed methods approach, using pre- and post-tests and questionnaires, together with researcher observations and participant interviews.

Through two rounds of playtests, the game positively affected intrinsic motivation and encouraged higher-order cognitive learning, critical thinking, communication and collaboration. Collaborative learning plays a significant role, DGBL is preferred over traditional methods and microlearning reduces information density and cognitive overload.

The study contributes to our understanding of digital game-based interventions on students’ intrinsic motivation and provides insights into effective ways to design instructional materials in similar teaching and learning settings.

Without aspiring to emulate Robert Browning's song thrush, we venture to repeat an admonition on smoking in the food trade of almost a decade ago. (The Smoking Habit, 1962, BFJ, 64, 79). The first time it coincided with a little research we had undertaken, which later saw the light of day epitomized in article form and was enthusiastically (sic) commented upon in sections of the press and then died as if it had never been born. (Tobacco and Lung Cancer, 1965, Med. Offr., 2955, 148). Now, it coincides with the most concentrated, officially inspired, campaign, so far, mounted against the evils of smoking. The most striking fact about all these national efforts every few years is the lack of success in real terms. A marketing organization achieving such poor results would count it a costly failure. It would be unfair to say that none have given up, but with a habit so ingrained, determination is required and in many, if not most, of those able to refrain, the craving is so great that they are smoking again within a week or so. Overall, the smoking population is enormous, including, as it does, girls and women‐folk. Once, it was undignified for a woman to be seen smoking. We recall a visit by Queen Mary to the village Manor House, just after the First War; she was an expert in antique furniture and came to see the manor's collection. When Her Majesty asked for a cigarette, the village rang with astonishment for days. Nothing as amazing had happened since Cavaliers and Roundheads tethered their horses beneath the three great poplars which stood on the green. “Queen Mary! 'er smokes!”

The paper aims to explore the social origins of Scottish chartered accountants and the accounting stereotype as portrayed in popular fiction.

The detective novels of the Scottish chartered accountant Alexander Clark Smith are used as a lens through which to explore the social origins of accountants and the changing popular representations of the accountant.

The novels contribute to our understanding of the construction of accounting stereotypes and of the social origins of Scottish accountants. They suggest that, while working class access to the profession was a reality, so was class division within it. In addition, Smith was ahead of contemporary professional discourse in creating a protagonist who combines the positive aspects of the traditional stereotype with qualities of a private‐eye action‐hero, and who uses accounting skills to uncover corruption and address (social) wrongs. However, this unconventional portrayal may have been incongruent with the image the profession wished to portray. The public image (or stereotype) portrayed by its members would have been as important in signalling and maintaining the profession's collective status as the recruitment of its leadership from social elites.

Smith's portrayal of accountants in personal and societal settings at a time of profound social change, as well as his background in the Scottish profession, provide a rich source for the study of social origins of Scottish chartered accountancy during the first half of the twentieth century. Further, Smith's novels are of a popular genre, and innovative in the construction of their hero and of accounting itself; as such they merit attention because of their potential to influence the construction of the accounting stereotype(s) within the popular imagination.