Search results

1 – 10 of 402
Per page
102050
Citations:
Loading...
Access Restricted. View access options
Article
Publication date: 21 January 2022

Gautam Gupta, Akshay Ashok Kumar, R. Sivakumar and Jayaraman Kandasamy

This study aims to investigate the prevalence of shock boundary layer interaction (SBLI) in air-breathing intake system is highly undesirable since this leads to high pressure…

260

Abstract

Purpose

This study aims to investigate the prevalence of shock boundary layer interaction (SBLI) in air-breathing intake system is highly undesirable since this leads to high pressure gradients, typical stream mutilation and pressure drop. A novel flow control mechanism is incorporated in this research holding an array configuration of passive flow control device (micro ramps [MR]) that is adapted to improve the boundary layer stability.

Design/methodology/approach

Two geometric variants of the MR, namely, MR40 and MR80 is considered which reduce the pressure drop during SBLI. The incidence oblique shock wave angle of 34° is considered for the modelling. Large eddy simulation (LES) turbulence model was used with subgrid models of Wall modelled LES, Smagorinsky–Lilly to compute the unsteady effects of SBLI control using micro vortex generators. The unsteady results are compared with steady Reynold’s average Naviers–Stoke’s equation for calibrating the turbulence models.

Findings

The array configuration of MR80 reduces the pressure drop by 22% as compared with no ramp configuration and also reduces the flow distortion in hypersonic inlet. The most affected region of the MR is in the vicinity of center-line. Quantitative results prove that the upstream influence of the shock waves has been largely reduces by MR80 array configuration as compared to single MR80 pattern configuration. Different vortex structures found in the experiments was exclusively predicted using LES.

Originality/value

This paper substantiates the requirement of MR array configuration for transferring the momentum from free stream to the boundary layer and thereby energizing the boundary layer. This process of energization delays the flow separation in hypersonic flow.

Details

Aircraft Engineering and Aerospace Technology, vol. 94 no. 6
Type: Research Article
ISSN: 1748-8842

Keywords

Access Restricted. View access options
Article
Publication date: 24 June 2020

Subrata Deb Nath, Gautam Gupta, Martin Kearns, Ozkan Gulsoy and Sundar V. Atre

The purpose of this paper is to investigate effects of layer thickness on densification, surface morphology, microstructure and mechanical and corrosion properties of 420…

710

Abstract

Purpose

The purpose of this paper is to investigate effects of layer thickness on densification, surface morphology, microstructure and mechanical and corrosion properties of 420 stainless steel fabricated by laser-powder bed fusion (L-PBF).

Design/methodology/approach

Standard specimens were printed at layer thickness of 10, 20 and 30 µm to characterize Archimedes density, surface roughness, tensile strength, elongation, hardness, microstructural phases and corrosion performance in the as-printed and heat-treated condition.

Findings

Archimedes density slightly increased from 7.67 ± 0.02 to 7.70 ± 0.02g/cm3 and notably decreased to 7.35 ± 0.05 g/cm3 as the layer thickness was changed from 20 µm to 10 and 30 µm, respectively. The sensitivity to layer thickness variation was also evident in properties, the ultimate tensile strength of as-printed parts increased from 1050 ± 25 MPa to 1130 ± 35 MPa and decreased to 760 ± 35 MPa, elongation increased from 2.5 ± 0.2% to 2.8 ± 0.3% and decreased to 1.5 ± 0.2, and hardness increased from 55 ± 1 HRC to 57 ± 1 HRC and decreased to 51 ± 1 HRC, respectively. Following heat treatment, the ultimate tensile strength and elongation improved but the general trends of effects of layer thickness remained the same.

Practical implications

Properties obtained by L-PBF are superior to reported properties of 420 stainless steel fabricated by metal injection molding and comparable to wrought properties.

Originality/value

This study successfully the sensitivity of mechanical and corrosion properties of the as-printed and heat-treated parts to not only physical density but also microstructure (martensite content and tempering), as a result of changing the layer thickness. This manuscript also demonstrates porosity evolution as a combination of reduced energy flux and lower packing density for parts processed at an increasing layer thickness.

Details

Rapid Prototyping Journal, vol. 26 no. 7
Type: Research Article
ISSN: 1355-2546

Keywords

Access Restricted. View access options
Book part
Publication date: 17 May 2024

Kishor Naskar and Sourav Kumar Das

The COVID-19 has affected millions of people across the world and worsened the socio-economic conditions that have sound reasons to discuss about the impact of COVID-19 on the…

Abstract

The COVID-19 has affected millions of people across the world and worsened the socio-economic conditions that have sound reasons to discuss about the impact of COVID-19 on the progress of achieving the target level of sustainable development. The stagflation due to COVID-19 has a possibility to push a large section of population back under the critical level of income. The economic restriction and lockdown has impacted on the supply of food and essential requirements for decent living. The health services and education have been jeopardised. So the possible impact to achieving the Sustainable Development Goals of no poverty (SDG1), zero hunger (SDG2), good health and wellbeing (SDG3), education (SDG4), decent work and economic growth (SDG8), income inequality (SDG10) are examined in this chapter. This chapter also discusses about the proper implementation and stress on SDGs as the possible instruments on the way out of recession. Difference-in-difference analysis is used to explain the impact of COVID-19 with the data in global context in respect of before COVID and after COVID.

Details

International Trade, Economic Crisis and the Sustainable Development Goals
Type: Book
ISBN: 978-1-83753-587-3

Keywords

Access Restricted. View access options
Article
Publication date: 13 March 2017

Arindam Datta, Ved Prakash Sharma, Tanushree Gaine and Meena Sehgal

Different pollutants emission due to the conventional energy consumption process is of major concern owed to its significant effect on human health vis-à-vis regional climate. The…

325

Abstract

Purpose

Different pollutants emission due to the conventional energy consumption process is of major concern owed to its significant effect on human health vis-à-vis regional climate. The purpose of this paper is to develop mitigation strategies to reduce the pollutant concentrations in the rural households conducted in a pristine rural village of Indian Sunderban area.

Design/methodology/approach

During winter, 2014, 20 households which were using traditional biomass cookstove for cooking and kerosene-lamp for lighting (KIT-TRD) were randomly selected. Specific type of improved forced draft biomass cookstove and solar lantern were used in ten of the selected households (KIT-IMP). Real time concentrations of particulate matter (PM) (PM2.5, PM10) and carbon monoxide (CO) during day and evening time cooking period were measured in KIT-IMP and KIT-TRD. A simulation model was established to evaluate most potential factor to control the level of pollutants inside the kitchen.

Findings

Conventional processes of energy consumption in the households, along with the outdoor concentration of pollutants influence the indoor concentration of measured pollutants. The concentration of PM and CO was significantly lower in the KIT-IMP than the other. In the KIT-TRD households, the daytime concentration of PM and CO was significantly higher compared to the evening. The simulated output overestimated the concentration of PM10 and CO in the KIT-TRD.

Originality/value

The concentration of PM2.5, PM10 and CO significantly reduces in the indoor environment with the introduction of improved cookstove and solar lantern; however, further research is required to develop optimum sizes of window and door in the rural households to reduce the concentrations of different pollutants inside the kitchen.

Details

Management of Environmental Quality: An International Journal, vol. 28 no. 2
Type: Research Article
ISSN: 1477-7835

Keywords

Access Restricted. View access options
Article
Publication date: 30 March 2010

Manisha Shekhar and M Saxena

This article documents instances of racism that have previously acted as barriers to Indian students' academic success in Australia. It is felt that such incidents would not have…

414

Abstract

This article documents instances of racism that have previously acted as barriers to Indian students' academic success in Australia. It is felt that such incidents would not have happened to students from, for example, China or Japan, as their governments would have taken more serious steps against the Australian government. There is a feeling in India that the Indian government can be seen as weak. Against this background, the article looks at potential reasons for racially motivated attacks against Indians in Australia, and at what can be done to reduce these, as well as both the Australian and Indian government responses to the particular instances reported.

Details

Ethnicity and Inequalities in Health and Social Care, vol. 3 no. 1
Type: Research Article
ISSN: 1757-0980

Keywords

Access Restricted. View access options
Article
Publication date: 31 October 2008

Pravin Kumar, Ravi Shankar and Surendra S. Yadav

The purpose of this paper is to identify and evaluate the relationships among the flexibility enablers and to prepare a hierarchy of these enablers to know their influences over…

2892

Abstract

Purpose

The purpose of this paper is to identify and evaluate the relationships among the flexibility enablers and to prepare a hierarchy of these enablers to know their influences over each other in global supply chain. The framework suggests that the priority of enablers in supply chain should be determined on the basis of their driving power and dependency.

Design/methodology/approach

Various enablers used by researchers and practitioners for flexibility management of global supply chain have been identified. These enablers have been classified as strategic, operational and performance‐based enablers. Interpretive structural modeling (ISM) is used to establish mutual relationships among the flexibility enablers and to prepare a hierarchy‐based model.

Findings

It has been observed that some enablers having high‐driving power and low dependency are of strategic importance. These enablers require more attention while other enablers based on operations and performances are dependents of strategic enablers.

Practical implications

The index of enablers based on driving power and dependency provides an insight to supply chain managers to make the entire supply chain highly flexible and help them to respond to global uncertainties.

Originality/value

Presentation of enablers in the form of hierarchy using ISM and ranking them into various driving power and dependent categories is a good effort to make flexible global supply chain.

Details

Journal of Modelling in Management, vol. 3 no. 3
Type: Research Article
ISSN: 1746-5664

Keywords

Access Restricted. View access options
Case study
Publication date: 18 November 2009

Tathagata Bandyopadhyay, G. Raghuram, Yashoverman Sharma and Niraja Shukla

Kolkata Port (KoPT) had achieved a turnaround from having made a loss of Rs 7.5 crores (cr) in the year 2000–01 to a net surplus of Rs 465.1 cr in the year 2006–07. A variety of…

Abstract

Kolkata Port (KoPT) had achieved a turnaround from having made a loss of Rs 7.5 crores (cr) in the year 2000–01 to a net surplus of Rs 465.1 cr in the year 2006–07. A variety of initiatives had been taken during the intervening years with a focus on tariff rationalization, revenues from alternate sources, infrastructure development and productivity improvements. While these had yielded results, there was a fundamental issue of operational complexity and inability to compete due to the locational disadvantage. KoPT was a riverine port with two locations, 232 kms and 115 kms upstream on the Hooghly with draft limitations.

Two significant studies having implications for future strategies of KoPT had recently been submitted in March and November 2007. The top management of the port, including the Chairman who was responsible for driving many of the initiatives, was concerned that it may not be possible to achieve long term sustainable growth continuing with the strategies used so far. A well thought out future roadmap, breaking away from the present thinking, was essential sustained growth.

Details

Indian Institute of Management Ahmedabad, vol. no.
Type: Case Study
ISSN: 2633-3260
Published by: Indian Institute of Management Ahmedabad

Keywords

Access Restricted. View access options
Book part
Publication date: 18 November 2024

Hafiz Wasim Akram, Léo-Paul Dana, Haidar Abbas and Md. Daoud Ciddikie

Family startups are essential to a nation’s development because they foster creativity, economic expansion, and job creation. They introduce novel concepts, game-changing…

Abstract

Family startups are essential to a nation’s development because they foster creativity, economic expansion, and job creation. They introduce novel concepts, game-changing technologies, and innovative business approaches to the market. Family startups also help a country be more competitive abroad by luring capital, encouraging entrepreneurship, and diversifying the economy beyond its core industries. Additionally, family startups operate as agents of social change by addressing societal problems and providing answers that benefit communities. Therefore, fostering a thriving start-up ecosystem is crucial for a nation’s long-term sustainable development and prosperity. Against this background, this book chapter examines the potential and difficulties that family startups in Oman’s developing entrepreneurial environment confront. The chapter explores the challenges faced by entrepreneurs as well as the opportunities for growth and innovation in this dynamic market to illuminate the distinctive dynamics of the Omani start-up scene.

Details

Entrepreneurial Behaviour of Family Firms: Perspectives on Emerging Economies
Type: Book
ISBN: 978-1-83753-934-5

Keywords

Access Restricted. View access options
Article
Publication date: 21 December 2021

Sriyanto Sriyanto, Muhammad Saeed Lodhi, Hailan Salamun, Sardin Sardin, Chairil Faif Pasani, Gulnaz Muneer and Khalid Zaman

The study aims to examine the role of health-care supply chain management during the COVID-19 pandemic in a cross-section of 42 selected sub-Saharan African (SSA) countries.

915

Abstract

Purpose

The study aims to examine the role of health-care supply chain management during the COVID-19 pandemic in a cross-section of 42 selected sub-Saharan African (SSA) countries.

Design/methodology/approach

The study used cross-sectional robust least square regression for parameter estimates.

Findings

The results confirmed the N-shaped relationship between the health-care logistics performance index (HLPI) and COVID-19 cases. It implies that initially HLPI increases along with an increase in COVID-19 cases. Later down, it decreases COVID-19 cases by providing continued access to medical devices and personal protective equipment. Again, it increases due to resuming economic activities across countries.

Practical implications

The continuing health-care supply chain is crucial to minimize COVID-19 cases. The international support from the developed world in providing health-care equipment, debt resettlement and resolving regional conflicts is deemed desirable to escape the SSA countries from the COVID-19 pandemic.

Originality/value

The importance of the health-care supply chain during the COVID-19 pandemic is evident in the forecasting estimates, which shows that from August 2021 to April 2022, increasing the health-care supply chain at their third-degree level would reduce coronavirus registered cases. The results conclude that SSA countries required more efforts to contain coronavirus cases by thrice increasing their health-care logistics supply chain.

Access Restricted. View access options
Article
Publication date: 31 January 2025

Chee Hua Chin, Jacqueline Wei-Chi Wong and Wei Chiang Chan

This study aims to propose a research framework grounded in the technology acceptance model (TAM) to assess the new service experiences in the medical industry through examining…

3

Abstract

Purpose

This study aims to propose a research framework grounded in the technology acceptance model (TAM) to assess the new service experiences in the medical industry through examining the intention to use online-to-offline (O2O) medical platforms. It focuses on the connections between immediacy of connection, context-based affordability, reliability and perceived convenience and perceived usefulness. This study also looks at how these determinants affect users’ intentions to use O2O medical platforms, with a particular emphasis on the moderating effect of customer online reviews.

Design/methodology/approach

This study was a quantitative research endeavour grounded in the TAM model that analysed usage intention of O2O medical platforms. Conducted in Sarawak, within the Borneo region, a total of 251 rows of data were collected by questionnaire and underwent initial analysis using SPSS, followed by a more in-depth two-stage partial least squares structural equation model analysis conducted with SmartPLS4.

Findings

According to this study’s findings, perceived usefulness and perceived convenience are significantly impacted by the proposed predictors – immediacy of connection, context-based affordability and reliability. Furthermore, intention to use O2O medical platforms was discovered to have a positive and significant impact from perceived usefulness and perceived convenience. It is noteworthy that the association among perceived convenience and perceived usefulness – which leads to usage intention of O2O medical platforms – did not show the moderating effect of customer online reviews.

Research limitations/implications

The findings suggested that context-based affordability, immediacy of connection and reliability need to be focused on by the information and communication technology developers, policymakers and medical professionals, as these variables can influence perceived convenience and usefulness, which will further impact the intention to use O2O medical platforms.

Originality/value

The formulated research framework holds significance in comprehending the usage intention of O2O medical platforms among consumers in Sarawak. O2O medical platforms have experienced global growth; however, limited studies were found in the Malaysian context. Hence, the objective of this study is to examine the intention to use O2O medical platforms in a relatively understudied area, specifically in Sarawak, an island located in Borneo, Malaysia.

Details

International Journal of Pharmaceutical and Healthcare Marketing, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1750-6123

Keywords

1 – 10 of 402
Per page
102050