G. Venkata Ramana Reddy and Ali J Chamkha
The purpose of this paper is to study chemical reaction and heat and mass transfer effects on steady free convection flow in an inclined porous plate in the presence of MHD and…
Abstract
Purpose
The purpose of this paper is to study chemical reaction and heat and mass transfer effects on steady free convection flow in an inclined porous plate in the presence of MHD and viscous dissipation through the application of scaling group of transformation and numerical method.
Design/methodology/approach
The fourth-order Runge-Kutta along with the shooting method is employed in the numerical solution of the governing equations.
Findings
The magnetic field parameter, the permeability of porous medium and the viscous dissipation are demonstrated to exert a more significant effect on the flow field and, thus, on the heat transfer from the plate to the fluid.
Originality/value
The problem is relatively original.
Details
Keywords
Sreedevi Gandluru, Prasada Rao D.R.V. and O.D. Makinde
The purpose of this paper is to investigate the impact of thermal radiation interaction with Hall current, buoyancy force, and oscillatory surface temperature on…
Abstract
Purpose
The purpose of this paper is to investigate the impact of thermal radiation interaction with Hall current, buoyancy force, and oscillatory surface temperature on hydromagnetic-mixed convective heat exchange stream of an electrically conducting nanofluid past a moving permeable plate in a porous medium within a rotating system.
Design/methodology/approach
Analytical closed-form solutions are obtained for both the momentum and the energy equations using the perturbation method.
Findings
The effects of various important parameters on velocity and temperature fields within the boundary layer are discussed for three different water-based nanofluids containing copper (Cu), aluminum oxide (Al2O3), and titanium dioxide (TiO2) as nanoparticles. Local skin friction and Nusselt number are illustrated graphically and discussed quantitatively. The results show that Hall current significantly affects the flow system. Results for some special cases of the present analysis are in good agreement with the existing literature.
Originality/value
The problem is relatively original to study the hydromagnetic-oscillatory flow of a nanofluid with Hall effect and thermal radiation past a vertical plate in a rotating porous medium.
Details
Keywords
Dheeraj Lal Soni, Venkata Swamy Naidu Neigapula and Jagadish Jagadish
This paper aims to focus on the selection of an appropriate nature-inspired texture pattern for cutting tool tribological surface. The selection process uses the recognized skin…
Abstract
Purpose
This paper aims to focus on the selection of an appropriate nature-inspired texture pattern for cutting tool tribological surface. The selection process uses the recognized skin textures of different snakes scrolling on highly rough and projected surface conditions to analyze suitability of texture based on the texture geometry and machining conditions. The work also aims to propose a texture pattern selection process to incorporate on cutting tool tribological surface.
Design/methodology/approach
The selection of alternative nature-inspired texture patterns based on the texture pattern geometry and machining properties leads to a multi-criteria decision-making problem. Thirteen criteria are considered for selecting an appropriate texture pattern among 14 alternatives, i.e. nature-inspired texture patterns. In the present work, an integrated analytical hierarchy process (AHP)-TOPSIS, AHP-multi-objective optimization on the basis of ratio analysis (MOORA) and AHP-Vlse Kriterijumska Optimizacija Kompromisno Resenje (VIKOR) approaches have been proposed for the selection of an appropriate nature-inspired texture pattern. AHP is used for the formulation of decision-making matrix and criteria weight calculations and ranking of alternatives is done by three methods. Spearman’s correlation compared and found positive relations between rank assigned by methods. Experimental validation is done in Lathe for selected texture effects.
Findings
The texture parameters C-1 (Width of texture) and C-2 (Depth of texture) are found significant, while T-2 (Blended Krait) and T-6 (Banded Racer-1) texture is found optimal to generate on cutting tool surface.
Research limitations/implications
Only some nature-inspired texture patterns have been recognized before the selection; an infinite number of textures are available in nature. The size of the texture pattern is difficult to identify by the selection process because each texture pattern may have different effects on tribological surfaces.
Practical implications
The proposed selection methodology of nature-inspired texture patterns will help identify optimal texture geometry for specific tribological applications. The nature-inspired texture patterned tool has a significant impact on the cutting force and temperature due to its tribological effect on the cutting tool surface; it decreases the power required for machining. The machining characteristics like roughness are found to decrease by using nature-inspired texture patterned tools.
Social implications
Various nature-inspire texture studies to generate specific effects on the tribological surfaces may be started study for the surface of aircraft, ships, bearings, etc. Small and big fabrication industries may benefit by decreasing the cost of machining using nature-inspired texture-patterned tools. Research society will pay attention to nature’s inspiration.
Originality/value
Novel snake-skin-inspired texture patterns are recognized and hybrid MCDM methods are proposed to select optimal texture pattern. Proposed method used single time normalization to effectively rank the alternatives. The insights gained from this research can be extrapolated to address similar challenges in selecting nature-inspired textures for various applications.
Peer review
The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2024-0163/
Details
Keywords
Gopi V and Vijaya Kumar Avula Golla
This paper aims to explore the numerical study of the steady two-dimensional MHD hybrid Cu-Fe3O4/EG nanofluid flows over an inclined porous plate with an inclined magnetic effect…
Abstract
Purpose
This paper aims to explore the numerical study of the steady two-dimensional MHD hybrid Cu-Fe3O4/EG nanofluid flows over an inclined porous plate with an inclined magnetic effect. Iron oxide (Fe3O4) and copper (Cu) are hybrid nanoparticles, with ethylene glycol as the base fluid. The effects of several physical characteristics, such as the inclination angle, magnetic parameter, thermal radiation, viscous propagation, heat absorption and convective heat transfer, are revealed by this exploration.
Design/methodology/approach
Temperature and velocity descriptions, along with the skin friction coefficient and Nusselt number, are studied to see how they change depending on the parameters. Using compatible similarity transformations, the controlling equations, including those describing the momentum and energy descriptions, are turned into a set of non-linear ordinary differential equations. The streamlined mathematical model is then solved numerically by using the shooting approach and the Runge–Kutta method up to the fourth order. The numerical findings of skin friction and Nusselt number are compared and discussed with prior published data by Nur Syahirah Wahid.
Findings
The graphical representation of the velocity and temperature profiles within the frontier is exhibited and discussed. The various output values related to skin friction and the Nusselt number are shown in the table.
Originality/value
The new results are compared to past research and discovered to agree significantly with those authors’ published works.
Details
Keywords
Yuchao Bai, Yongqiang Yang, Zefeng Xiao and Di Wang
This paper aims to verify whether selective laser melting (SLM) could be used for manufacturing mold with conformal cooling channels and determine whether the mechanical…
Abstract
Purpose
This paper aims to verify whether selective laser melting (SLM) could be used for manufacturing mold with conformal cooling channels and determine whether the mechanical properties development of SLM manufacturing maraging steel mold would be beneficial to improve the quality of mold.
Design/methodology/approach
A series of block specimens and cylindrical tensile specimens are manufactured by SLM, and then are heat treated by solution treatment (ST) and solution treatment + aging treatment (ST + AT), respectively. The development of microstructure, microhardness and tensile strength of specimens is investigated. Then, a mold with conformal cooling channels is designed and manufactured by SLM and machined after ST with microhardness decreasing.
Findings
The morphology of microstructure varies widely under different heat treatment. The microhardness and tensile strength decrease after ST with cellular structure broken, which is conducive to mechanical finishing for mold to improve surface accuracy. After that, the hardness and strength of the mold increase significantly by AT with the precipitation of Ni3Mo, Fe2Mo and Ni3Ti particles. The maraging steel mold with conformal cooling channels can be manufactured by SLM successfully. And the surface accuracy of mold could be improved easily by machining.
Originality/value
Compared with the traditional mold with simple cooling channels, the mold with conformal cooling channels can be manufactured by SLM directly. The hardness of maraging steel mold manufactured by SLM can be reduced through ST, which is conducive to mechanical finishing for overcoming the defect of low precision of SLM directly manufacturing mold. This provides a new way for manufacturing mold of high quality.
Details
Keywords
A.K. Abdul Hakeem, Priya S., Ganga Bhose and Sivasankaran Sivanandam
The purpose of this study is to provide that porous media and viscous dissipation are crucial considerations when working with hybrid nanofluids in various applications.Recent…
Abstract
Purpose
The purpose of this study is to provide that porous media and viscous dissipation are crucial considerations when working with hybrid nanofluids in various applications.Recent years have witnessed significant progress in optimizing these fluids for enhanced heat transfer within porous (Darcy–Forchheimer) structures, offering promising solutions for various industries seeking improved thermalmanagement and energy efficiency.
Design/methodology/approach
The first step is to transform the original partial differential equations into a system of first-order ordinary differential equations (ODEs). The fourth-order Runge–Kutta method is chosen for its accuracy in solving ODEs. The present study investigates the free convective boundary layer flow of hybrid nanofluids over a moving thin inclined needle with the slip flow brought about by inclined Lorentz force and Darcy–Forchheimer porous matrix, viscous dissipation.
Findings
It is found that slip conditions (velocity and Thermal) exist for a range of the natural convection boundary layer flow. In the hybrid nanofluid flow, which consists of Al2O3 and Fe3O4 are nanoparticles, H2O − C2H6O2 (50:50) are considered as the base fluid. The consequence of the governing parameter on the momentum and temperature profile distribution is graphically depicted. The range of the variables is 1 ≤ M ≤ 4, 1 ≤ d ≤ 2.5, 1 ≤ δ ≤ 4, 1 ≤ Fr ≤ 7, 1 ≤ Kr ≤ 7 and 0.5≤λ ≤ 3.5. The Nusselt number and skin friction factors are used to calculate the numerical values of various parameters, which are displayed in Table 4. These analyses elucidate that upsurges in the value of the Fr noticeably diminish the momentum and temperature. It is investigated to see if the contemporary results are in outstanding promise with the outcomes reported in earlier works.
Practical implications
The results can be very helpful to improve the energy efficiency of thermal systems.
Social implications
The hybrid nanofluids in heat transfer have the potential to improve the energy efficiency and performance of a wide range of systems.
Originality/value
This study proposes that in the combined effects of hybrid nanofluid properties, the inclined Lorentz force, the Darcy–Forchheimer model for porous media and viscous dissipation on the boundary layer flow of a conducting fluid over a moving thin inclined needle. Assessing the potential practical applications of the hybrid nanofluids in inclined needles, this could involve areas such as biomedical engineering, drug delivery systems or microfluidic devices. In future should explore the benefits and limitations of using hybrid nanofluids in these applications.