Muhammad Nubli Zulkifli, Fuaida Harun and Azman Jalar
This paper aims to analyze the effect of surface roughness and hardness of leadframe on the bondability of gold (Au) wedge bond using in situ inspection of laser interferometer…
Abstract
Purpose
This paper aims to analyze the effect of surface roughness and hardness of leadframe on the bondability of gold (Au) wedge bond using in situ inspection of laser interferometer and its relationship with the deformation and wire pull strength.
Design/methodology/approach
The in situ inspection of ultrasonic vibration waveform through the changes of vertical axis (y-axis) amplitude of wire bonder capillary was carried out using laser interferometer to analyze the formation of Au wedge bond. The relationship between the changes of ultrasonic waveform of capillary with the deformation and the pull strength was analyzed to evaluate the bondability of Au wedge bonds.
Findings
It was observed that the changes in vertical axis amplitude of ultrasonic vibration waveform of wire bonder capillary can be used to describe the process of bonding formation. The loss of ultrasonic energy was exhibited in ultrasonic vibration waveform of wire bonding on leadframe that has higher value of roughness (leadframe A) as compared to that of leadframe that has lower value of roughness (leadframe B). The lower pull strength obtained by Au wedge bond further confirms the reduction of bond formation because of the higher deformation on leadframe A as compared to that of leadframe B.
Originality/value
The relationship between in situ measurement using laser interferometer with the bondability or deformation and wire pull strength of Au wedge bonds on different surface roughness and hardness of leadframes is still lacking. These findings provide a valuable data in analyzing the bonding mechanisms that can be identified based on the in situ measurement of ultrasonic vibration and the bondability of Au wedge bonds.
Details
Keywords
Fuaida Harun, Roslina Ismail, Azman Jalar and Shahrum Abdullah
– This paper aims to analyze the effect of Au wire size and location of hook during wire pulling test to identify the variation of results obtained.
Abstract
Purpose
This paper aims to analyze the effect of Au wire size and location of hook during wire pulling test to identify the variation of results obtained.
Design/methodology/approach
Two hook locations, namely, location A and location B were used to analyze the effect of hook location. Location A was the same as the hook location required by MIL-STD-883E standard, whereas location B was located near to the second bond. The correlation between new purposed failure modes and MIL-STD-883E standard was developed to reflect on the pull strength with the physical failure.
Findings
It was observed that fine pitch Au wire has higher variation and lower process capability of pull strength. Au wire pulled by the hook at location B provides a more representative result compared to that at location A. Fifty per cent or more of Au remnant is required to be considered as a good and reliable Au wedge bond based on the new purposed failure modes.
Originality/value
The evaluation of gold (Au) wedge bond requires a new proper wire pulling test method. This is due to the large variation obtained from the application of current practice of wire pulling test.