Search results

This study considers the five factors of a car rotation system: angle (F1), arm length (F2), toe in and out (F3), width (F4) and length (F5). The purpose of this paper is to fine tune the design so it produces the smoothest response to various rotation angles.

In the case of Ackerman’s principle, the response surface methodology (RSM) was used to analyze data when encountering different quality characteristics at various rotation angles.

In this study, RSM was used to obtain the best factor and the best reaction value for the five factors of a car rotation system.

In this study, the four-wheel steering of a car is taken as an example. When the current wheel is turned, the intersection of the left and right wheels of the front axle falls on the extension line of the rear wheel. In this case, the steering will be the smoothest. In this example, we selected angle (F1), arm length (F2), toe in and out (F3), width (F4) and length (F5) as experimental factors, hoping to satisfy the Ackerman principle.

Traditionally, when dealing with four-wheel steering problems, solutions may be based on past experience or on new information used to formulate R&D plans. In this study, the combination of statistical factors and optimization is used to find the optimal combination of factors and the relationship between factors.

In the past, most literature relied on kinematics to study the car rotation system due to a lack of experimental design and analysis concepts. However, this study aims to achieve the above goals in finding the solution, which can be used to predict reaction values.

This study adopts a capability-based view to investigate the attainment of organizational agility in manufacturing small and medium-sized enterprises (SMEs). It first explores how these firms mobilize different types of operational and dynamic information technology (IT) capabilities to achieve a high level of agility through their digital transformation. In return, it also reveals opposite paths, i.e. those leading to its absence.

The research method involves a qualitative comparative analysis (QCA) of 65 Canadian manufacturing SMEs. Through necessity and sufficiency condition analysis procedures, this approach emphasizes the complexity of the digital transformation processes by revealing different sets (i.e. configurations) of what enable, or inhibit, organizational agility in these firms.

The findings indicate that manufacturing SMEs need to align at least one dynamic IT capability (sensing, learning, coordinating or integrating) and one operational IT capability (IT management, IT infrastructure or e-business) to be highly agile. In contrast, other findings indicate that there are suboptimal combinations of IT capabilities, which result in an absence of agility.

This study offers a deeper understanding of the complex interaction of IT capabilities in SMEs seeking greater agility in their business activities. Its contributions provide insights on the mobilization of a range of capabilities, both complementary and interdependent, to respond to changing conditions in their internal and external environments. These actionable findings can help various actors in the digital development of SMEs to design and implement effective IT strategies and public policies.

This study explores how second language (L2) East Asian international students at an Australian university describe themselves as foreign-accented speakers and develop a new L2 identity within a sociolinguistic landscape that reinforces hierarchies between first language (L1) and L2 speakers.

Drawing upon van Manen’s (2016) hermeneutic phenomenology, this study employs a qualitative-dominant mixed methods approach. An initial survey with 306 participants informed subsequent phenomenological interviews with five students, enabling a comprehensive exploration of their L2 identity construction.

The analysis revealed four themes: being proud to be L2 speakers, the value of having L2, complex attitudes towards foreign accents, and miscommunication as natural. These findings underscore the importance of critical engagement with evolving L2 identity and highlight the role of university interventions in fostering students' agency, which aids their successful transitions to host institutions.

This study addresses a gap in existing research by exploring how L2 students develop a new L2 identity beyond the challenges of language proficiency. It emphasises the significance of contextualising their experiences within the broader sociolinguistic landscape, offering insights that contribute to a better understanding of L2 identity construction among international students.

The purpose of this paper is to develop and test a framework of small and medium enterprises’ (SMEs) strategic orientation (SO) and its impact on social media performance. Moreover, it introduces a new concept, social media orientation (SMO) (composed of sales and business development (SBD) and visibility) to add in the model.

A quantitative approach was used and, based on a study of 257 SMEs, analyses were performed. A smartPLS analysis was judged appropriate regarding the sample size.

Results show that entrepreneurial orientation (EO) and customer orientation have a positive influence on SBD which in turn has a positive influence on social media performance. Visibility is positively influenced by EO and has an indirect effect on social media performance. Social media performance is therefore directly influenced by SBD and indirectly by visibility.

The authors complete previous research that called for the introduction of different SO on a same study and go further as the author highlight the role of EO on visibility (and not only on business or performance). A second contribution lies in the conceptualization of SMO (defined here with SBD and visibility) and third in the measurement of social media performance through growth and attention.

SMEs first need to develop their visibility, and then link it to SBD.

This research is one of the first to explore SMEs’ SO on social media and proposes a new concept defined as SMO. It gives SMEs future direction on how to perform on these platforms.

Using e-mail is a time-consuming activity that can increase workload stress. The purpose of this paper is to investigate the relationship between the individual’s e-mail load, workload stress and desired e-mail load, drawing from the cybernetic theory of stress.

Based on prior theory, the authors first hypothesized relationships among e-mail load, workplace stress and desired e-mail load. The authors then tested these relationships on a sample of 504 full-time workers in the USA, using survey data and covariance-based structural equation modeling techniques.

The authors find that higher e-mail load is associated with higher workload stress; higher workload stress is associated with lower desired e-mail load; lower desired e-mail load is associated with lower e-mail load; and higher workload stress is associated with higher psychological strain, higher negative emotions and lower organizational commitment.

The study provides a novel understanding of workload stress due to e-mail load, through the lens of cybernetic theory. It contributes to the e-mail overload and technostress literatures by conceptualizing desired e-mail load as a potential outcome of workplace stress and as a regulator for e-mail load. For practitioners, the study highlights the importance of managing employees’ e-mail load to prevent the negative effects of workplace stress and associated strains.

This study aims to examine how the effect of host country formal institutional uncertainty on the percentage of equity sought in cross-border acquisitions (CBAs) is moderated by the host country industry (i.e. targets from the technology versus those from the non-technology industry).

This study is based upon the legitimacy perspective of institutional theory and uses Tobit regression analysis on a sample of 1,340 CBAs.

Results show that cross-border acquirers prefer a lower equity level for targets in institutionally less developed countries and that this negative effect of the host country institutional risk on the equity percentage sought is more pronounced for technology-based targets.

Three major limitations of the study are as follows: The data were collected from only Japanese acquirers. The study measured formal institutional uncertainty by applying only secondary data. The study used the Bloomberg Industry Classification Systems, instead of the Standard Industry Classification that has been used widely in prior studies.

This study shows that the industry selected has a bearing on equity sought in CBAs. Investing in institutionally less developed countries is particularly challenging when the targets of acquisition are in the technology industry.

To the best of the authors’ knowledge, this is the first study that investigates the moderating effects of an industry on the relationship between host country formal institutional uncertainty and the percentage of equity sought in CBAs.

This paper aims to propose a conceptual framework showing factors favoring the adoption of information systems (IS)-based service innovations in the public sector at the organizational level.

The research design is based on the development of a theoretical framework from the technology–organization–environment framework and from a case study of an outsourced IS-based electronic document management system from six different ministries in the same state in Mexico.

Strong contrasts in the degree of adoption of the service innovation appeared among various ministries involved in state government, revealing differences in the presence or absence of key variables, integrated into theoretical framework, including perception of external pressure; perception of benefits and risks and organizational readiness; and political, sociotechnical and economical inertia in given institutional conditions, leading to different public value outcomes associated with intraorganizational efficiencies and to the relationship between public administration and politicians.

Public managers must consider process mapping and sources of political, sociotechnical and economical inertia in given institutional conditions, to ensure a satisfactory adoption of service innovations in public administration and create public value. The promotion of a more structured and enduring professional career system in such context is another key to the adoption of innovations.

Based on theoretical and empirical grounds, the main contribution of this paper is to emphasize, through an integrated theoretical framework, the relatively unexplored roles of process mapping in organizational readiness and of political, sociotechnical and economic sources of inertia in relation to specific agents in the adoption of public sector service innovations at the organizational level in the context of the public administration in Mexico to produce public value.

The purpose of the present study is intended to fill a research gap, by advancing a conceptual model which brings novel insights on the relationships between socially responsible consumption and consumer’s need for uniqueness.

Relying on a questionnaire-based survey for data collection, the proposed model was tested using the partial least squares (PLS) algorithm for structural equation modeling (SEM), which allows the assessment of the models containing both formative and reflective constructs.

The research found that 73.7 per cent of the variance in the consumer’s belief in the importance of personal power to make a difference through socially responsible choices is explained by the proposed model. Moreover, four of the five factors of socially responsible consumption fully mediate the positive effect of the consumer’s need for uniqueness on the importance attached to personal socially responsible choices in driving positive change.

The study avails a phenomenological perspective by offering novel insights from a Romanian sample. The limitation associated with a country-centric vision is compensated through the contextual analysis and integration of a new point of reference in the overall framework of socially responsible consumption.

The evidence is indicative of new consumption insights and should be closely considered by companies.

The study draws upon a conceptual model integrating the relationships between socially responsible consumption and a psychological characteristic – the consumer’s need for uniqueness – which has been never tested as such before.

Francois Quesnay, known as the “Confucius of Europe”, was profoundly influenced by traditional Chinese culture to form his thoughts, which contained strong Chinese characteristics. This paper aims to examine economic thought of Francois Quesnay from the perspective of the construction of socialist political economics with Chinese characteristics.

Moreover, his thoughts also profoundly influenced subsequent economists, such as Adam Smith and Karl Marx. It can be said that Francois Quesnay was at the intersection of Chinese, Western and Marxist thought systems, so it is quite important to examine his thoughts critically and conduct source-tracing in China.

Hence, in the process of constructing and developing socialist political economy with Chinese characteristics, there is an urgent need to focus on exploring the value of excellent traditional Chinese culture at the theoretical level and combining the development and dissemination of the history of thoughts and the historical position of Chinese reality to realize the innovation and development of socialist political economy with Chinese characteristics.

Meanwhile, while absorbing nutrition from excellent traditional Chinese culture, it is necessary to establish scientific coordinates rather than use the discourse systems and paradigms of Western economics to interpret ancient Chinese economic thoughts. It is necessary to adhere to, inherit and develop Marxist political economy and absorb nutrition from Chinese excellent traditional culture to construct socialist political economy with Chinese characteristics.