Search results

This paper aims to solve the problems molybdenum disulfide (MoS₂) nanosheets suffer from inadequate dispersion stability and form a weak lubricating film on the friction surface, which severely limits their application as lubricant additives.

MoS₂/C₆₀ nanocomposites were prepared by synthesizing molybdenum disulfide (MoS₂) nanosheets on the surface of hydrochloric acid-activated fullerenes (C₆₀) by in situ hydrothermal method. The composition, structure and morphology of MoS₂/C₆₀ nanocomposites were characterized. Through the high-frequency reciprocating tribology test, its potential as a lubricant additive was evaluated.

MoS₂/C₆₀ nanocomposites that were prepared showed good dispersion in dioctyl sebacate (DOS). When 0.5 Wt.% MoS₂/C₆₀ was added, the friction reduction performance and wear resistance improved by 54.5% and 62.7%, respectively.

MoS₂/C₆₀ composite nanoparticles were prepared by in-situ formation of MoS₂ nanosheets on the surface of C₆₀ activated by HCl through hydrothermal method and were used as potential lubricating oil additives.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-10-2023-0321/

The metal detector used as a wall scanner has become a kind of popular household instrument. It is important to possess the characteristics, including low-cost, reliability, easy repeatability and simple procedure in this device. The purpose of this paper is to found a model of differential probe applied to metal detector.

The new model consists of an emitting coil and a differential receiving coil. The emitting coil uses winding inductance to produce a magnetic field and the receiving coil senses the change of magnetic flux. All turns of the receiving coil are designed in the same plane, so it can be fabricated with signal printed circuit board. The balance of differential probe is promised by the constraint relation of the parameters, including the radius and the turns of the receiving coil and the emitting coil. A novel fine adjustment has been proposed to offset the design error that can make the model more ideal.

The differential probe can be produced easily and need not to be calibrated. In the design, the amplifier and the filter circuit is used for the output signal processing and the harmonic analysis based on Fourier transform is used to analyze the voltage signal in order to detect and distinguish the metallic object. The differential probe in the prototype, which area is π×352 (mm2), can detect the cylindrical metallic object including iron, and aluminum which thickness is 2 mm and radius is 30 mm in the distance of 120 mm.

The model of differential probe proposed in the paper is feasible and effective to apply in the hand-held metal detector.

With the increasing urbanization rates in emerging countries such as the ones in Latin America and the Caribbean, urban logistics solutions and initiatives are widely needed. Urban planners often consider only passenger transportation and leave freight transportation unattended, thus increasing externalities and degrading the transportation of goods. This chapter presents three urban logistics solutions, which intend to tackle problems related to urbanization and last mile delivery operations challenges by evaluating location models for loading and unloading bays, urban transfer centers location models, and freight trip generation models. The presented solutions were proposed by several researchers of the Institute of Innovation in Productivity and Logistics CATENA-USFQ over the last four years and remain theoretical at the moment. However, we present estimated results of potential implementations in three districts of Quito: Historic Center, Entertainment District, and Corporate District. This chapter not only presents the mentioned urban logistics solutions in Quito but also gives an overview of the followed methodology, which can be replicated in countries and cities of similar characteristics of the region.

The elderly service industry is emerging in China. The Chinese government introduced a series of policies to guide elderly service enterprises to improve their service quality. This study explores novel differentiated subsidy strategies that not only promote the improvement of service quality in elderly service enterprises but also alleviate the financial burden on the government.

Evolutionary game and Hotelling models are employed to investigate this issue. First, a Hotelling model that considers consumer word-of-mouth preferences is established. Subsequently, an evolutionary game model between local governments and enterprises is constructed, and the evolutionary stable strategies of both parties are analyzed. Finally, simulation experiments are conducted.

The findings indicate that local government decisions have a significant influence on the behavior of elderly service enterprises. Increasing the proportion of local governments opting for subsidy strategies helps incentivize elderly service enterprises to improve their service quality. Furthermore, providing differentiated subsidies based on the preferences of the customer base of elderly service enterprises can encourage service quality improvement while reducing government expenditure. The findings offer valuable insights into the design of government subsidy policies.

Compared with previous research, this study examines the role of consumer preferences in a differentiated subsidy policy. This enriches the authors’ understanding of the field by incorporating neglected aspects of consumer preferences in the context of the emerging elderly service industry.

This research focuses on analyzing the impact of digital transformation (DT) on the green innovation performance of Spanish wineries, as well as the mediating effect of green knowledge sharing (GKS) on this main relationship, as well as the moderating role of top management environmental awareness (TMEA) on the GKS-green innovation performance linkage. In addition, age, size and protected designation of origin (PDO) membership are used to increase the precision of the cause–effect relationships examined.

The study proposes a conceptual model based on previous studies, which is tested using partial least squares structural equation modeling, with data collected from 196 Spanish wineries between September 2022 and January 2023.

The results of the research reveal the existence of a positive and significant relationship between the development of DT and green innovation performance of Spanish wineries, as well as the partial mediation of GKS in this link and a positive moderation of TMEA in the GKS-green innovation performance bond.

Winery executives should prioritize aligning DT with TMEA to drive green innovation performance. Additionally, it is recommended that they actively promote GKS within their wineries to enhance sustainability performance and strengthen their competitive positioning in an eco-conscious market.

The originality of the study derives from its pioneering character, as the research enters unexplored terrain by investigating the role of the GKS as a mediator in the relationship between DT and green innovation performance, as no previous research has ventured in this direction.

To obtain the global optimum of large‐scale complex engineering systems, the paper proposes a decomposition‐coordination method of multidisciplinary design optimization (MDO).

A rational decomposition approach based on artificial neural network (ANN) and genetic algorithms is proposed for partitioning the complex design problem into smaller, more tractable subsystems. Once the problem is decomposed into subsystems, each subsystem may be solved in parallel provided that there is some mechanism to coordinate the solutions in the different subsystems. So the response surface approximation model based on the ANN as a coordination method is described and a MDO framework is presented.

The proposed method was implemented in the design of a tactical missile. Numerical results show the effectiveness of the decomposition‐coordination method, as indicated by both better performance and lower computational requirements.

This paper adopts a novel MDO method to solve complex engineering problem and offers a potential and efficient MDO framework to researchers.

As the grey systems theory has been widely used in the field of sustainable development (SD) research, in the following, a short literature overview will be put forward, starting from the usage of these theories in the economic development, social inclusion and environmental protection contributions to the evolving process of SD during 2011–2021. The purpose of this paper is to identify some key studies from all the SD areas in which the grey systems can be used in order to open and to bring the researchers to new domains in which they can reveal their interest and in which they can successfully use the methods offered by the grey systems theory.

Using the search engine offered by the Google Scholar and the Web of Science (WoS), a literature review has been performed for the grey systems applications on SD research on both grey relational analysis (GRA) and grey forecasting. In addition, some grey evaluation theories – clustering evaluation models and grey target decision models – have also been presented.

Many grey models are widely used in the field of SD. Compared with other methods such as grey prediction, grey evaluation and decision-making model, GRA technology is the most used method, and the research using this method is more than three times that of all other methods.

The present paper identifies some of the most representative examples in which the grey system theory (GST) has been used, but, in the same time, there are a lot of studies that have not been mentioned here due to the lack of space.

The present paper focuses on the SD applications in which GST has been successfully used, bringing to the reader a general overview on this field and, in the same time, enables new research perspectives.

This study aims to understand the epistemic foundation of the classification applied in the first Chinese library catalogue, the Seven Epitomes (Qilue).

Originating from a theoretical stance that situates knowledge organization in its social context, the study applies a multifaceted framework pertaining to five categories of textual data: the Seven Epitomes; biographical information about the classificationist Liu Xin; and the relevant intellectual, political, and technological history.

The study discovers seven principles contributing to the epistemic foundation of the catalogue's classification: the Han imperial library collection imposed as the literary warrant; government functions considered for structuring texts; classicist morality determining the main classificatory structure; knowledge perceived and organized as a unity; objects, rather than subjects, of concern affecting categories at the main class level; correlative thinking connecting all text categories to a supreme knowledge embodied by the Six Classics; and classicist moral values resulting in both vertical and horizontal hierarchies among categories as well as texts.

A major limitation of the study is its focus on the main classes, with limited attention to subclasses. Future research can extend the analysis to examine subclasses of the same scheme. Findings from these studies may lead to a comparison between the epistemic approach in the target classification and the analytic one common in today's bibliographic classification.

The study is the first to examine in depth the epistemic foundation of traditional Chinese bibliographic classification, anchoring the classification in its appropriate social and historical context.

Image classification or more specifically, annotating images with keywords is one of the important steps during image database indexing. However, the problem with current research in terms of image retrieval is more concentrated on how conceptual categories can be well represented by extracted, low level features for an effective classification. Consequently, image features representation including segmentation and low‐level feature extraction schemes must be genuinely effective to facilitate the process of classification. The purpose of this paper is to examine the effect on annotation effectiveness of using different (local) feature representation methods to map into conceptual categories.

This paper compares tiling (five and nine tiles) and regioning (five and nine regions) segmentation schemes and the extraction of combinations of color, texture, and edge features in terms of the effectiveness of a particular benchmark, automatic image annotation set up. Differences between effectiveness on concrete or abstract conceptual categories or keywords are further investigated, and progress towards establishing a particular benchmark approach is also reported.

In the context of local feature representation, the paper concludes that the combined color and texture features are the best to use for the five tiling and regioning schemes, and this evidence would form a good benchmark for future studies. Another interesting finding (but perhaps not surprising) is that when the number of concrete and abstract keywords increases or it is large (e.g. 100), abstract keywords are more difficult to assign correctly than the concrete ones.

Future work could consider: conduct user‐centered evaluation instead of evaluation only by some chosen ground truth dataset, such as Corel, since this might impact effectiveness results; use of different numbers of categories for scalability analysis of image annotation as well as larger numbers of training and testing examples; use of Principle Component Analysis or Independent Component Analysis, or indeed machine learning techniques for low‐level feature selection; use of other segmentation schemes, especially more complex tiling schemes and other regioning schemes; use of different datasets, use of other low‐level features and/or combination of them; use of other machine learning techniques.

This paper is a good start for analyzing the mapping between some feature representation methods and various conceptual categories for future image annotation research.