Search results

Low pilling and wrinkle-free appearance of cellulosic fabrics are always demanded. Resin finishes are applied to improve these properties, but there is an adverse effect of the resin finish as it tends to reduce the strength of the fabrics. Therefore, the effect of the two most important finishes; anti-pilling and resin finish, on the strength characteristics of 100% viscose and 50:50 Viscose/cotton plain and satin fabrics were investigated in this paper. The purpose of this study is to identify significant factors affecting the strength of fabrics finished with crosslinking agents [non-ionic acrylate copolymer and (dimethyloldihydroxyethyleneurea)].

A statistical model of 2³ 3² mixed level factorial design was used for the study. Appratan N9211 (A) and Arkofix NF (B) were tested at three concentrations, whereas three factors fabric; weave (C), blend ratio (D) and curing method (E) were tested at two levels. The performance of the finish was evaluated by two response variables, which were tensile and tear strength.

The various conditions of high strength values of the fabrics were presented in this paper. It was found that the tear strength of the fabrics increased after finishing except for 50:50 viscose/cotton plain fabric, whereas the tensile strength of plain fabrics is better at shock cure and for a satin normal cure is better. The model adequacy plots exhibit that the assumptions of normality and independence are not desecrated. Moreover, the values of “predicted R²” are in reasonable agreement with the “adjusted R²,” which confirms that models have been accounted for most of the inconsistency.

This paper is a part of my PhD dissertation. Unlike the previous studies, this paper investigated the effect of two crosslinking agents, Appretan N9211 as anti-pilling and Arkofix NF as wrinkle resistant agents on 100% viscose and 50:50 viscose/cotton plain and satin. Three different concentrations of both the crosslinking agents were used. Also, fixation of the finishes was carried out at a normal cure and shock cure.

Cellulosic fabric and plain weave are the most commonly used material in home textiles. The poor wrinkling, dimensional stability and pilling are some of the problems faced during usage. The textile industries apply resin finish to improve these characteristics. The purpose of this study is to improve pilling resistance, dimensional stability and smoothness appearance (SA) of rayon and rayon/cotton plain fabrics using different concentrations of dimethyloldihydroxyethylene urea (DMDHEU) and acrylic copolymer. The finish was fixed using two different fixation methods.

Three concentrations, 40, 100 and 150 g/l of Arkofix NF (DMDHE based) and Appretan N9211 (acrylic copolymer), were taken. The finish was applied at normal and shock cure. The effects of finish on pilling resistance, dimensional stability, smoothness, tear strength, light fastness, Berger whiteness and yellowness index of plain fabrics were investigated.

The changes in the characteristics of the finished fabrics were compared with unfinished fabrics. This study revealed that at 40 g/l of Arkofix NF and Appretan N9211 using a normal cure would improve the pilling resistance, dimensional stability and SA of the plain fabrics. Whereas, there was no adverse effect observed on tear strength, light fastness, Berger whiteness and yellowness index of plain fabrics at these conditions.

Unlike the previous studies, this paper proposed the single finish formulation where the functional characteristics of the plain rayon and rayon cotton fabrics meet the general requirement of a customer.

The textile sector is moving towards new technologies, where the application of nanotechnology is offering fabrics with multifunctional properties making fabric odourless, hydrophobic, durable and self-cleaning. This aim of this research is to investigate self-cleaning ability of denim fabric with the application of zinc oxide nanoparticles (ZnO NPs) synthesized naturally. The primary focus of this investigation is achieving sustainability mark through green synthesis of ZnO NPs.

In this analysis, ZnO NPs being one of the metal oxides exhibiting self-cleaning, UV-protective and anti-microbial properties were synthesized naturally using Azadirachta Indica leaves. The prepared NPs were characterized by using X-ray diffraction and scanning electron microscopy analyses confirming their size and crystalline structure. Different formulations were investigated with varying concentration of zinc oxide and auxiliaries onto the denim fabric using pad-dry-cure application technique.

XRD analysis confirmed the successful green synthesis of ZnO NPs. SEM analysis revealed the homogeneous and hexagonal wurtzite NPs deposition on the denim fabric. It was ascertained that with 5% ZnO NPs and 7% Binder concentrations, the formulation resulted in a smooth and even layer on the denim fabric maintaining the appearance and feel at the same time offers appreciable grading (Grade 4) against the stringent stains of Ketchup, Coffee, Grape and Orange Juice with insignificant change in tensile strength.

In this study, self-cleaning attributes of denim fabric with zinc oxide nano formulations of different composition was studied to achieve promising functional properties in a single step not studied earlier.

Reactive and direct dyes are the most frequently used dyes for cotton fabrics. Cellulosic fibers pose a great affinity toward them. However, both dyes consume large quantities of salts for exhaustion; these electrolytes (salt) are discharged as effluents posing environmental problems and disorders in aquatic life. Therefore, this study aims to explore alternative approaches to minimize salt consumption.

For this study, the combination of chitosan and keratin, being sustainable biopolymers, are used as mordants instead of salts for the cationization of 100% cotton and chief value cotton (CVC) during dyeing with direct and reactive dyes. Color strength, exhaustion rates and color fastness to washing, rubbing and perspiration have been evaluated in this paper. In this research, keratin solution is applied on cotton and CVC (with the cotton to polyester ratio of 80%:20%) fabrics by pad-dry-cure, while chitosan solution has been applied with the exhaust method. The pretreated fabrics are dyed with both direct and reactive dyes with 2% and 4% depth of shade (DOS). The performance of the cationized fabrics with salt-free dyeing method was compared with the conventional dyeing.

The results of this study showed positive impact on exhaustion rates ranged from 19% to 69% of the values obtained without salt in 2% DOS and a range of 22%–47% in 4% DOS of reactive and direct dyes with treated samples. Color fastness to crocking results indicated the improvement of results by a factor of 0.5–1 after treatment and good wash fastnesses rating (4.5/5) were achieved for the chitosan-keratin treated fabrics equivalent to untreated samples. In addition, antimicrobial testing was performed on both treated and untreated fabrics of cotton and CVC. The results indicated that chitosan treated samples showed greater inhibition toward microbial activity as compared to keratin treated samples. Fourier transform infrared (FTIR) spectroscopy was used to identify the functional groups of chitosan and keratin treated fabric samples to confirm their presence. In the FTIR spectra, the chitosan was characterized by its hydroxyl, carbonyl and amide III peaks indicating the presence of chitosan and keratin was detected by the presence of primary amines. Scanning electron microscopy analysis was conducted in which it was visibly seen that the fibers have been coated with chitosan and keratin laid after being dyed.

For the first time, direct and reactive dyes are applied on chitosan and keratin-treated cotton and CVC to obtain multifunctional and eco-friendly fabrics.

Face masks are the most recommended precautionary measure since the emergence of SARS-CoV-2 since 2020 and the most useful PPE against this virus and its variants so far. This study aims to develop reusable and biodegradable mask from 100% regenerated bamboo or/and its blend. Selection of natural and regenerated textile materials is to minimize generation of solid waste. This attempt will eventually protect our earth by minimizing or better discontinuing the production of the disposable nonbiodegradable face masks available worldwide.

Hundred percent regenerated bamboo and 50:50 bamboo:cotton were selected to knit plain and interlock fabrics for manufacturing of reusable sustainable face masks. A 2³ 3²-mixed-level factorial design was applied to study the effect of liquor ratio and temperatures, fabric structure, blend ratios and finishes at three different levels. Model 2³ 3² has two factors (liquor ratio and temperatures) at three levels and three factors (fabric structure, blend ratios and type of finish) at two levels. Knitted fabrics were then applied with antibacterial finishes; sanitized T99-19 and sanitized T27-22, separately at three different liquor ratios (1:10, 1:12 and 1:15) and temperatures (45, 55 and 65 °C) via exhaust method. After completing processing, fabric thickness, pilling resistance, dimensional stability, bursting strength, Berger whiteness index, air permeability and antibacterial properties of each trial were evaluated using standard test procedures.

Selected fabrics treated either by sanitized T27 or sanitized T99 in a liquor ratio of 1:15 against 65 °C, showed excellent bacteriostatic/bactericidal activity. However, 100% regenerated bamboo interlock knitted fabric treated with sanitized T99 in a liquor ratio of 1:15 at 65 °C has the most desired values of dimensional stability, pilling resistance, Berger whiteness, fabric thickness, air permeability and bursting strength which made it the best for the manufacturing of the masks. Reusable mask is comprised of three layers in which the first and the third layers were of selected 100% regenerated bamboo fabric while a PM2.5 filter was inserted in between. Bacterial filtration efficiency, particle filtration efficiency, biocompatibility and microbial cleanliness will be evaluated in future, to compare the performance of proposed reusable and biodegradable face mask with N95 masks and other fabric masks available commercially.

This study resulted in a development of reusable eco-friendly facemask which was not attempted by the preceding investigations. Outcomes of this work pave the way for a greener and safer earth by using easily obtainable regenerated bamboo fabrics, antibacterial finishes and knitted structures.

The purpose of this study is to highlight the threats related to the utilization of synthetic fibers. Volatile organic compounds, particulates and acid gases are released during the production of polyester and other synthetic textiles. Polyester is problematic solid waste material as it takes centuries to break down and hence causes microplastic pollution. Biodegradable synthetic solutions for the replacement of polyester are a sustainable business marketing these days. The naNia fiber is the breakthrough product and it is claimed a biodegradable, compostable and toxin-free polymer.

In this research, fabric constructed of naNia fiber was dyed with the extract of naturally occurring Lawsonia inermis (henna) plant leaves. The henna dye was extracted in water and ethanol using different methods, and the better extract was selected by the evaluation of ultraviolet-visible spectroscopy and phytochemical analysis. Henna with ethanol extract showed more desirable results hence it was selected to dye naNia fabric. To improve dyeability, premordanting, simultaneous mordanting and postmordanting were done using chitosan, fresh lemon extract and tannic acid, respectively. The dyed fabric samples were subjected to color strength analysis and multiple colorfastness tests.

The colorfastness test has shown good to excellent results. Scanning electron microscope analysis had also shown the attachment of dye molecules to the filaments. This study revealed that henna dye is appropriate to color naNia fiber even without the aid of a mordant.

For the first time, toxicant-free, biodegradable polyester (naNia) is successfully dyed with sustainable and naturally available dyes and mordants.

This paper aims to synthesize and critically explore the available knowledge about the linkages between compulsory citizenship behavior, knowledge hiding and employee innovative performance through a systematic literature review. It proposes a conceptual framework, highlighting the core relationships between these constructs.

Using two databases (Dimensions and Scopus), the authors critically examine 93 peer-reviewed publications from 2006 to 2023 to identify the arguments supporting the associations between the studied constructs.

Through an integrative conceptual model, this study provides insights into the devastating impact of compulsory citizenship behavior on employee innovation performance, further suggesting how knowledge hiding may play a mediating role.

The study's main limitation lies in its conceptual nature. Future research should empirically validate the model to gain richer perspectives into the linkages.

The existing body of literature lacks a comprehensive understanding of the nexus between compulsory citizenship behavior, knowledge hiding and employee innovative performance. This study is a pioneer since it explores the emerging concepts of compulsory citizenship behavior and knowledge hiding and accentuates their presence in the context of innovative performance at the individual level through coercive persuasion theory and cognitive dissonance theory.

By using Technology Acceptance Model, the purpose of this study is to investigate how the perceived usefulness and ease-of-use of shopping mobile apps affects consumer’s flow experience, attitude, impulsive buying tendency (IBT) and urge to impulsive buying on halal fashion products.

A quantitative study was done on 357 Indonesian online shoppers to find out how perceived usefulness and ease of use of mobile shopping apps affect impulsive buying tendencies and urges on halal fashion products. Flow experience and attitude were used as mediating variables, and the research hypotheses were tested using Partial Least Square Structural Equation Modeling (PLS-SEM).

This study confirmed significant positive relationships between perceived usefulness and ease of use of mobile apps, flow experience, attitude, IBT and urge to impulsive buying. The results of this study show that perceived usefulness and ease of use influence flow experience. Ease of use also influences attitude, but perceived usefulness did not impact attitude. In addition, flow experience did not impact attitude. However, both flow experience and attitude influence IBT. Furthermore, IBT significantly mediated flow experience and attitude into urge to impulsive buying.

This study only captured consumers in one country, so its results cannot be generalized to other nations. Random sampling may limit result generalization. In this study, three mobile shopping applications were investigated and the results would have been different if more mobile shopping applications were investigated.

The study gives a better understanding of how the perceived usefulness and ease of use of mobile shopping apps affect a consumer's tendency and urge to impulsive buying on halal fashion products by using flow experience as mediating variable.

The purpose of this research paper is to predict sustainability-driven entrepreneurship intention among university students in the developing market (Pakistan).

The target population of this study was university students in Pakistan. According to UNDP (2017) report, Pakistan has the largest youth population. More than 64% of the total population (210 million) is below 30 years of age. If trained properly, this huge chunk of the population could become a source of intellectual capital for the development of the nation. The quota based on age sampling technique was used to collect the data from university students in Karachi because more than 64% of the Pakistan population is below 30 years of age.

The findings reveal that university entrepreneurial support has a strong influence on attitude toward sustainable entrepreneurship and entrepreneurial self-efficacy.

The role of university entrepreneurial support, environmental concern and students’ entrepreneurial self-efficacy are vital factors in sustainability-driven entrepreneurship. This study enriches the literature of green entrepreneurship helping to understand university students’ intention for sustainable entrepreneurship. The outcome of this study would help strategists and environmental academicians to guide university students regarding the launch of sustainable ventures.

To the best of authors’ knowledge, this is one of the first studies to explore the effects of environmental concern on entrepreneurial intention among university students in the context of a developing country – Pakistan.