Search results

The purpose of this paper is to formulate a benchmark to increase the tyre curing press production rate while minimizing tyre curing press downtime and maintenance cost with the help of a maintenance management technique based on overall equipment effectiveness (OEE).

The methodology is based on determining the OEE of tyre curing press before and after rectifying the causes of failures. The failure mode and effect analysis (FMEA) technique is used to find out the root causes of repetitive failures in tyre curing press by using the risk priority number.

A significant change in the value of OEE is observed after rectifying the repetitive failures, which were determined using the FMEA technique. Thus, it is concluded that the OEE and FMEA assist in improving the industrial performance and competitiveness of the production equipment studied.

This study is limited to determining the OEE of single equipment only, not the whole production system. Manufacturing facilities are dependent on the operating environment; therefore a comparison of two different manufacturing plants based on the OEE value would not be justified.

This study can be applied in any tyre manufacturing industry in order to take competitive benefits, such as reduction in equipment downtime, increased production and reduction in maintenance cost.

The angle from which the paper approaches the bottleneck problem in a tyre production line is original for the studied company and shows positives results. It allows the company to apply the same approach in its other production equipment, lines and factories to achieve improvement in industrial performance and competitiveness.

The purpose of this study is to identify which social and psychological factors better determine intentions to quit smoking to inform public health policy.

Data for this cross-sectional study were collected via face-to-face interaction following the pen-and-paper method. A total of 371 usable responses were received from randomly selected respondents of eight public sector universities located in the South Punjab province of Pakistan. Partial least squares structural equation modeling analysis was performed using SmartPLS program. A supplementary qualitative study, based on 21 in-depth interviews with the smokers, was conducted to augment findings of the quantitative study.

Results showed that protection motivation theory and theory of planned behaviour are supported to predict intentions to quit smoking. Subjective norms have a greater influence on intentions to quit smoking than attitudes towards smoking cessation, while perceived behavioural control fails to predict intentions to quit smoking. Perceived rewards and perceived cost are significant in predicting attitudes towards smoking cessation, while extrinsic rewards predict intentions to quit smoking.

The existing models reported in the literature have sparsely investigated the cognitive (such as motivation and emotions) and social factors (such as social influence and behavioural controls) together as determinants of intentions to quit smoking, leaving room for more studies on an integrated model of these factors. This study takes the opportunity and proposes an integrated model encompassing psycho-social factors to predict tobacco consumption quitting behaviour in an emerging economy context.

The purpose of this study is to investigate the integrated ICT-based library services at the Indian Institute of Technology (IIT) from the users' perspectives. By evaluating these services, the study seeks to know how ICT integration enhances academic access, user satisfaction and overall library functionality.

The research employed a survey approach with a questionnaire as the primary data collection tool, involving a sample of 277 participants, determined through the Cochran sample size formula, with a 95% confidence level and a ±5% margin of error, drawing upon 25% of the population using a stratified random sampling technique. The collected data were analyzed using SPSS software version 23, applying statistical tests including T-tests, ANOVA and multivariate MANOVA, along with Tukey’s post hoc analysis.

The findings revealed that the library is equipped with a state-of-the-art ICT infrastructure facility, which significantly impacts users' academic performance. Research scholars (RS) perceived the highest impact with a mean score of 60.01, followed by postgraduates at 50.04 and undergraduates at 39.83. In terms of ICT-based library services, RS exhibit the highest usage. Additionally, the results indicate a high overall satisfaction level among users regarding library resources and services, with a mean satisfaction score of 4.10. However, 28.5% (N = 79) of respondents reported issue “in locating specific information.”

The study demonstrates how the integration of ICT can significantly enhance service delivery, support academic advancement and improve user satisfaction in an increasingly digital and networked environment. These findings and strategies are valuable for libraries around the world, providing a roadmap for using technology to satisfy their users' changing requirements and encouraging an atmosphere of innovation and constant development for library services.

By focusing on user perspectives, the study provides actionable recommendations for library administrators and policymakers aiming to optimize library services in the digital age. The findings can serve as a benchmark for similar academic institutions striving to enhance academic access through technological advancements.

The purpose of this study endeavour is to delve into the perceptions and sense-making of both spiritually empowered leadership and workplace spirituality at the Akhuwat Foundation, a prominent social sector microfinance organization in the Muslim majority economy of Pakistan.

Using a qualitative research approach and an intrinsic instrumental case study research methodology, a series of 16 in-depth semi-structured interviews and three focus group discussions (each focus group contained five members) were conducted with employees and leaders at the Akhuwat Foundation of Pakistan from June 2020 to June 2021.

The findings from thematic data analysis show that the spiritual leadership at Akhuwat Foundation implemented workplace spirituality by creating a spiritual environment, such as brotherhood, at the workplace. Moreover, the employees exercise workplace spirituality by voluntarily performing their duties at lesser salaries. Alternatively, spiritual leaders care for employees by reducing organizational problems and improving their employees’ well-being.

Although this research explores spiritual leadership and workplace spirituality in the national context of Pakistan, further investigation in other contexts is required to cross-check and validate the research findings.

Regulators and policymakers of organizations operating in Muslim-majority countries should focus on brotherhood, inspire employees through vision, resolve organizational challenges and create a spiritual environment for spiritual leadership and workplace spirituality to improve employee well-being, broader societal welfare and organization’s overall performance.

This study revealed new themes of workplace spirituality and spiritual leadership in the organizational context of a Muslim-majority country, Pakistan, identified context-specific themes and enhanced the theory of spiritual leadership and workplace spirituality.

Inclination angle has been reported to have an enhancing effect on the thermal-hydraulic characteristics and entropy of some thermal systems. Therefore, this paper aims to numerically investigate the effects of inclination angle, volume concentration and Reynolds number on the thermal and hydraulic characteristics and entropy generation rates of water-based Al₂O₃ nanofluids through a smooth circular aluminum pipe in a turbulent flow.

A constant heat flux of 2,000 Watts is applied to the circular surface of the tube. Reynolds number is varied between 4,000 and 20,000 for different volume concentrations of alumina nanoparticles of 0.5%, 1.0% and 2.0% for tube inclination angles of ±90o, ±60o, ±45o, ±30o and 0o, respectively. The simulation is performed in an ANSYS Fluent environment using the realizable kinetic energy–epsilon turbulent model.

Results show that +45o tube orientation possesses the largest thermal deviations of 0.006% for 0.5% and 1.0% vol. concentrations for Reynolds numbers 4,000 and 12,000. −45o gives a maximum pressure deviation of −0.06% for the same condition. The heat transfer coefficient and pressure drop give maximum deviations of −0.35% and −0.39%, respectively, for 2.0% vol. concentration for Reynolds number of 20,000 and angle ±90o. A 95%–99.8% and 95%–98% increase in the heat transfer and total entropy generation rates, respectively, is observed for 2.0% volume concentration as tube orientation changes from the horizontal position upward or downward.

Research investigating the effect of inclination angle on thermal-hydraulic performance and entropy generation rates in-tube turbulent flow of nanofluid is very scarce in the literature.

This review deals with the pros and cons of ultraviolet (UV) radiation on human beings and the role of textile clothing and the chemicals used for textiles to protect from their harmful effects.

UV radiation (UVR) which has further divided into UVA, UVB, and UVC. Almost 100% of UVC and major portion of UVB are bounced back to stratosphere by ozone layer while UVA enters the earth atmosphere. Excessive exposure of solar or artificial UVR exhibit potential risks to human health. UVR is a major carcinogen and excessive exposure of solar radiation in sunlight can cause cancer in the lip, skin squamous cell, basal cell and cutaneous melanoma, particularly in people with the fair skin.

This article aims to provide a comprehensive overview of the harmful effects of UVR on human skin, factors affecting UV irradiance and factors affecting UV protection offered by textile clothing.

Effect of fiber properties, yarn properties, fabric construction, fabric treatments and laundering has been reviewed along with the identification of gaps in the reported research. A comparison of inorganic and organic UV absorbers has also been given along with different testing and evaluation methods for UV protective clothing.

This review paper aims to provide a comprehensive retrospective analysis of the research landscape in the Halal industry through a threefold approach, including bibliometric analysis, latent theme identification and examination of driving factors of research citations.

A total of 2,510 research documents, identified from the Scopus through a systematic search, were considered for review. The review methods included bibliometric analysis of the domain, application of the machine learning structural topic modeling (STM) to identify latent themes and negative binomial regression to estimate the impact of paper, author and geographical characteristics on citation rates.

In addition to bibliometric insights, the STM uncovered 10 key topics within the Halal industry literature, including certification processes, dietary practices, consumer behavior, ethical considerations, supply chain management, market dynamics, Halal tourism, verification methods, regulatory frameworks and Halal food production and marketing. Positive associations with citation rates were found for abstract length, number of keywords, paper age, number of references, funding, number of authors and international collaboration, while a negative association was observed for authorship from Malaysia.

This paper, besides providing insights into research dynamics and citation patterns, also guides future research avenues in the Halal industry.

The research investigates the relationship between halal credence, awareness, certification, need for cognition (NC), effort, health consciousness, and satisfaction towards halal food (STHF). In addition, observe the influence of STHF on purchase intention explored. Finally, religiosity is examined as a moderator between STHF and halal purchase intention.

The data was collected from Muslim participants in Guangzhou and Shenzhen, China. A total of 476 respondents take part in this research. The data was collected from Muslims who eat food from halal food hotels. A purposive sampling technique is used to collect data from respondents. PLS-SEM is followed to test the proposed hypotheses.

The results reveal that halal credence, awareness, certification, effort, and health consciousness increase STHF. Conversely, NC does not influence STHF. Moreover, STHF significantly determines halal purchase intention. Finally, religiosity strengthens the positive association between STHF and purchase intention.

Food marketers and policy decision-makers can use research findings to enhance halal purchase intention. In China, Muslim customers usually search for halal food by putting in extra effort and seeing halal certification. They trust halal food because religiosity is their priority.

This initial research incorporates halal credence, halal awareness, certification, NC, effort, health consciousness, STHF, and religiosity to examine halal purchase intention using the theory of planned behavior (TPB).

This paper aims to investigate the factors that motivate consumers to pay for halal logistics certification and consequently demand for its certification in Pakistan.

The study used a sample of 302 respondents from the city of Karachi, Pakistan and used partial least square structural equation model. The study used consumers’ perception, concern and personal societal perspective to determine their willingness to pay and the demand of halal certification.

Results revealed that all of the aforementioned variables are significant and positive except perspective usefulness which has insignificant and negative relationship with consumer willingness.

Pakistan is an Islamic state and people living there are very cautious about the food items they eat and the procedures they follow. Therefore, this study contributes to evaluate such factors that influence consumer willingness to pay for halal logistics in Pakistan. Furthermore, this study suggests policymakers and 3rd party logistics service providers to educate their potential consumers about halal logistics and halal certification.

This study aims to examine effects of the COVID-19-induced lockdown on turnover intentions (TI) for the hospitality retail sector.

This study reviews employee TI literature before and during the COVID-19 pandemic. The data for the present study were derived from a sample of 301 hospitality retail workers employed within the integrated resorts on The Cotai Strip, Macao. Data were analysed using structural equation modelling.

This study showed a significant positive relationship between job satisfaction (JS) and the two variables of workload and pay (WP) and company support (CS). Co-worker relationship did not influence JS. Furthermore, JS had a significant negative effect on employee TI. WP had the greatest influence on whether to leave the sector or not.

The suggested framework can assist hospitality retail management in developing an employee-retention strategy as the sector recovers from pandemic restrictions.

To the best of the authors’ knowledge, this is one of the first studies to develop a TI framework for the hospitality retail sector during the pandemic.