Search results

The gap that this research attempts to fill is to analyse the explanatory factor “industry” when assessing the reputation of a corporate group. In other words, this research attempts to demonstrate the impact of the “industrial halo” on the assessment of corporate reputation, given that, to date, the academic literature has not considered industry as an explanatory variable in the assessment of the reputation of private companies.

A sample of 43 Spanish companies was used to analyse the relationship between the reputation of firms as measured by the Merco Empresas index, and the industries to which they belong, after controlling for company performance, size, turnover, public recognition of their leadership, and corporate responsibility. This involved conducting a cross-sectional analysis of the relationship between the variables for each year in the time period from 2005 to 2016. The available data were taken from the firms' annual financial reports and websites, as well as from the Merco.

The paper shows the existence of industrial halos that account for the corporate reputation of businesses in Spain. It is also shown that industrial halos are not permanent over time, and that they tend to occur in years of crisis.

It would have been desirable for this study to have had sufficient data to include other industries, but this was not possible. As for possible extensions, in addition to expanding the period considered, other analytical techniques, such as panel data models, could be applied to allow comparison with the results obtained here.

The results of this study have some practical implications. Firstly, firms that publish corporate reputation rankings should be aware of the distortion that the industrial halo can produce, especially in times of uncertainty, and seek to correct for it in their measurements. And secondly, corporate groups themselves should assume that the reputation of the industry affects their individual reputation, and consequently, they should see the other companies in the industry not only as competitors but also as “reputational allies”. They should therefore make collective efforts to improve in this respect, especially in the face of reputational crises.

This paper provides a better understanding of the relationship between the reputation of a company and the industry to which it belongs, and of its permanence over time. This relationship has been little studied in the Spanish market to date.

本研究擬分析當企業集團的信譽被評估時的解釋性因素-行業,以填補現時的研究缺口。具體來說,研究人員鑒於學術文獻至今仍未於評估私營企業的信譽時、把行業當作是一個解釋變量來看待,故擬進行研究、以顯示行業光環在評估企業信譽時所產生的影響。

研究使用的樣本為43間西班牙公司。研究人員分析以Merco Empresas 指數來測量的公司信譽與公司所屬行業之間的關係。有關的分析調控了公司的業績、規模、營業額、企業責任、以及企業領導能力的公眾認可程度所帶來的影響。研究人員對有關變量間的關係進行橫向分析 分析於2005年至2016年期間年度性地進行。現有數據取自有關公司的年度財務報表和其網站,也有取自Merco的。

研究結果表明了可解釋西班牙企業信譽的行業光環是存在的。研究結果亦顯示、行業光環不是永恆的,而且,行業光環往往會在營運極其困難的年度內出現。

本文讓我們更深入瞭解公司信譽與公司所屬行業之間的關係,以及其在時間上的永恆性。就這相關的關係而言,探討西班牙市場的研究至今為數不多。

Technology is integral to contemporary life; where the digital transformation to virtual information accessibility impacts instruction, it alters the skills of learning and comprehension (Gonzalez-Patino & Esteban-Guitart, 2014; Lloyd, 2010). Although librarians/media specialists provide orientation, instruction, and research methods face-to-face and electronically, they recognize that digital learning instruction is not a linear process, and digital literacy (DL) is multi-disciplinary (Belshaw, 2012). Policy and public research findings indicate that higher education must be prepared to adapt to rapid changes in digital technology (Maybee, Bruce, Lupton, & Rebmann, 2017). Digital learning undergoes frequent transformations, with new disruptive innovation and research attempts at redefinition (Palfrey, 2015). Research often overlooks junior/community colleges. We are all learners and we need to understand the digital learning challenges that incorporating DL includes in the new digital ecology (Adams Becker et al., 2017). This study provides real faculty/librarian commentaries regarding the understanding needed to develop digital learning and contemporary digital library resources. The authors investigate faculties’ and librarians’ degree of DL perceptions with instruction at junior/community colleges. Survey data analysis uses the mean of digital self-efficacy of variables collected, revealing that participants surpassed Rogers’s (2003) chasm of 20% inclusion. Findings provided data to develop the Dimensions of Digital Learning rubric, a new evaluation tool that encourages faculty DL cross-training, librarians’ digital learning collaboration, and effective digital learning spaces.

Citizen Science – public participation in scientific projects – is becoming a global practice engaging volunteer participants, often non-scientists, with scientific research. Citizen Science is facing major challenges, such as quality and consistency, to reap open the full potential of its outputs and outcomes, including data, software and results. In this context, the principles put forth by Data Science and Open Science domains are essential for alleviating these challenges, which have been addressed at length in these domains. The purpose of this study is to explore the extent to which Citizen Science initiatives capitalise on Data Science and Open Science principles.

The authors analysed 48 Citizen Science projects related to pollution and its effects. They compared each project against a set of Data Science and Open Science indicators, exploring how each project defines, collects, analyses and exploits data to present results and contribute to knowledge.

The results indicate several shortcomings with respect to commonly accepted Data Science principles, including lack of a clear definition of research problems and limited description of data management and analysis processes, and Open Science principles, including lack of the necessary contextual information for reusing project outcomes.

In the light of this analysis, the authors provide a set of guidelines and recommendations for better adoption of Data Science and Open Science principles in Citizen Science projects, and introduce a software tool to support this adoption, with a focus on preparation of data management plans in Citizen Science projects.

Direct ink writing (DIW) is a robust additive manufacturing technology for the fabrication of fiber-reinforced thermoset composites. However, this technique is currently limited to low design complexity and minimal heights. This study aims to investigate the feasibility of UV-assisted DIW of composites to enhance the green-part strength of the printed inks and resolve the complexity and the height limitations of DIW technology.

The experimental approach involved the preparation of the thermoset inks that are composed of nanoclay, epoxy, photopolymer and glass fiber reinforcement. Composite specimens were fabricated in complex geometries from these ink feedstocks using UV-assisted, hybrid 3D-printing technology. Fabricated specimens were characterized using optical microscopy, three-point bending mechanical tests and numerical simulations.

The introduced hybrid, UV-assisted 3D-printing technology allowed the fabrication of tall and overhanging thermoset composite structures up to 30% glass fiber reinforcement without sagging during or after printing. Glass fiber reinforcement tremendously enhanced the mechanical performance of the composites. UV-curable resin addition led to a reduction in strength (approximately 15%) compared to composites fabricated without UV resin. However, this reduction can be eliminated by increasing the glass fiber content within the hybrid thermoset composite. Numerical simulations indicate that the fiber orientation significantly affects the mechanical performance of the printed composites.

This study showed that the fabrication of high-performing thermoset composites in complex geometries was possible via hybrid DIW technology. This new technology will tremendously expand the application envelope of the additively manufactured thermoset composites and the fabrication of large composite structures with high mechanical performance and dimensional freedom will benefit various engineering fields including the fields of aerospace, automotive and marine engineering.

A university without an academic library is unimaginable since the library serves as a pivot for both learning and research. Freeman (2005), while talking about the importance of a library in academic life, stated that it holds a unique position, symbolizing the heart of the institution. A good library is not only one that stacks printed material or has portals to access online resources but also provides a flexible learning space with reading rooms, facilitates discussion and encourages collaborative learning and scholarship. With limited resources, it is increasingly difficult for universities to allocate funds to re-design library spaces. Modern academic libraries have to respond not only to pedagogical changes but also to technological changes, accommodating them in the library space design and management. Modern libraries are trying to integrate features of the traditional form of learning as well as the digital form. This book will present case studies and empirical evidence discussing the changing face of libraries. It will talk about re-modeling of existing libraries with the help of new architectural design to utilize the space and inculcate the digital literacy development. Scholars discuss, in the chapters, how they meet users’ needs and how they use in stakeholders’ inputs to design innovative library spaces.

Tourism is a key source of income to South Africa. Food and beverages is a key part of tourism and the literature reveals that tourists spend up to a quarter of their budget on cuisine. South Africa has, however, been rated as the least-prepared culinary travel destination and the travel destination with the greatest potential for growth. Therefore, a segmentation taxonomy based on culinary preferences of international tourists to South Africa is put forth which can be used to prepare South Africa as a culinary travel destination. The 627 international tourists surveyed were divided into five segments with the use of factor analyses, t-tests, Spearman rank correlations and analysis of variance. The segments were named conservationists, experience seekers, devotees, explorers and socialisers (CEDES taxonomy). Multiple results and implications are discussed in the paper.

How can large international financial firms go green in authentic ways? What enhances ‘Net Zero action’? Changes in global banks, fund managers, and insurance firms are at the heart of green finance. External change pressures – combined with problematic firm predispositions – exacerbate barriers to change and promote scepticism about authentic Net Zero change. Field research reveals main elements, connections, and interactions of this question by considering financial firms as complex socio-technical systems (Mitleton-Kelly, 2003). An interdisciplinary/holistic narrative approach (De Bakker et al., 2019) is adopted to design a conceptual framework that can support a green ‘behavioural theory of the financial firm’ (green BTFF). The BTFF presents an international version (Peng, 2001) of the resource-based view (RBV) of the firm (Barney, 1991; Hart, 1995; Teece et al., 1997).

The approach of this chapter is aimed at closing knowledge gaps and realign values in financial markets and society. By raising awareness about organised hypocrisy and facades (Brunsson, 1993; Cho et al., 2015; Schoeneborn et al., 2020) in financial firms the chapter aims at overcoming the gap between ‘talking’ and ‘walking’ in the financial sector. The chapter defines testable firm-level hypotheses for ‘Green Finance’ (Poterba, 2021) as well as – by implication – tests for ‘greenwashing’.

This paper reviews the origins of the Ethics Council of the Federation of Social Communication Media of Chile (1991-2019) and looks into the historical circumstances surrounding its creation, the concept of self-regulation as understood by its founders, and the criteria that initially ruled its operation.

A qualitative survey of nine contemporary witnesses and the confrontation with the scientific literature.

The results reveal a significant coincidence with the academic literature both in the description of the concept of self-regulation and in the origin of the ethics councils and of the system under which they operate. However, a series of nuances not usually considered in the concept of self-regulation are described.

This study will help assess the national and international possibilities of self-regulation and the significance of the Chilean ethics council.