Search results

1 – 2 of 2
Per page
102050
Citations:
Loading...
Access Restricted. View access options
Article
Publication date: 3 May 2016

Altaf H. Basta, Houssni El-Saied and Emad M. Deffallah

The purpose of this paper is to examine the effects of denaturised rice bran (RB) and route of its incorporation during synthesis of urea-formaldehyde adhesive, on the performance…

95

Abstract

Purpose

The purpose of this paper is to examine the effects of denaturised rice bran (RB) and route of its incorporation during synthesis of urea-formaldehyde adhesive, on the performance of the resulting adhesive, especially viscosity, free-formaldehyde (HCHO) and quality of the produced bagasse-based composites, in comparison with those produced from commercial urea formaldehyde (UF) and RB-added UF.

Design/methodology/approach

The experiments were carried out using different denaturised RB at different percentages (1-5 per cent) and pH’s (9-11 per cent). These denaturised RB were incorporated at the last synthesis stage of UF synthesis process. The assessment was carried out on both the viscosity and environmental safety of the adhesive system, as well as the quality of the manufactured bagasse-based composites, of the particleboards (static bending, internal bond (IB) strength and water resistance properties), in comparison to commercial UF and RB added to UF. The performance of the adhesive system was evidenced by the thermogravimetric analysis and differential scanning calorimetry analyses.

Findings

The results showed that maximum static bending [modulus of rupture (MOR) and modulus of elasticity (MOE)], IB strength and water resistance properties of the resulted wood product accompanied the incorporating 5 per cent of the denaturised RB (pH = 9.0), at the last synthesised stage of UF synthesis process. Where, this synthesis process provided adhesive with viscosity nearly approaching to commercial UF adhesive, and reduced the free-HCHO of adhesive and board by approximately 56 and 49 per cent, respectively. For mechanical and water resistance properties, it provided board with 24.5 MPa MOR, 3,029 MPa MOE, 0.64 MPa IB, 11 per cent swelling (SW) and 20.5 per cent absorption. These properties fulfil the requirements of high grade particleboards American National Standard Institute (ANSI) A208.1, especially with respect to static bending values and water swelling property.

Research limitations/implications

Incorporating 5 per cent of pre-denaturised RB, at pH 9.0, in wet form, and in the last stage of synthesis UF, provided adhesive system with convenient viscosity together with lower free-HCHO and acceptable board properties, compared with that produced from commercial UF, or adding denaturised RB to already synthesised UF. For the mechanical (MOR, MOE and IB) and water resistance properties (SW per cent and absorption per cent) of the produced composite are complied the standard values of H-3 grade of particleboard.

Practical implications

Promising adhesive system is resulted from incorporating 5 per cent of pre-denaturised RB at pH 9.0, in wet form, during last stage of UF synthesis process.

Social implications

Incorporating the RB by-product of oil production to commercial UF or during synthesis of UF will be benefit for saving the healthy of wood co-workers, and motivating the wood mill to export its wood products.

Originality/value

The article provides a potential simple way to solve the drawback of increasing the viscosity of UF, as a result of adding RB, via incorporating the RB during synthesis process. The viscosity of the synthesised RB-modified UF approaches RB-free UF, and consequently the adhesive system easily penetrates through agro-fibres, and provides good bonding behaviour and high performance wood product (both quality and environmental by minimising formaldehyde emission or toxic gasses during board formation).

Access Restricted. View access options
Article
Publication date: 1 July 2014

Altaf H. Basta, Houssni El-Saied and Emad M. Deffallah

The purpose of this paper is to prepare high-performance agro-based composites from the non-toxic rice bran-urea-formaldehyde (RB-UF) adhesive system. Investigations have…

488

Abstract

Purpose

The purpose of this paper is to prepare high-performance agro-based composites from the non-toxic rice bran-urea-formaldehyde (RB-UF) adhesive system. Investigations have continued for production high performance agro-based composites using environmentally acceptable approaches. The utilisation of such system with the available used local agro-based wood products (sugar-cane bagasse, SCB) adds economic value and helps reducing the environmental impact of commercial urea-formaldehyde (UF) adhesive, and most importantly, provides a potentially inexpensive alternative to the existing commercial artificial wood-panel mills.

Design/methodology/approach

Optimising the process for incorporating the RB in UF, as wood adhesive for binding the bagasse fibres, was carried out, by partially replacing commercial UF by denaturalised RB in slurry (wet) and dry form or through synthesis of UF. The denaturalisation of RB was carried out at different pHs (10-11) and at temperature 60°C for two hours. While incorporating the RB during synthesis of UF, it was carried out according to the method reported elsewhere. The formulation of adhesive components, pH value of the denaturalisation stage and the process of incorporating the RB were optimised. Assessment of the role of RB adhesive was specified from its free-formaldehyde (HCHO) content, as well as the properties (mechanical and physical properties) of the produced composites of bagasse particle board type, in comparison with the environmental impact of commercial thermosetting resin (UF).

Findings

The promising adhesive system exhibits improvement in the environmental performance (as E1 type) over a commercially UF adhesive (as E2 type), besides providing boards fulfill the requirements of grade H-3 (according to ANSI A208.1 (NPA1993). This adhesive system was resulted from replacing 30 per cent of UF by denalturalised RB (at pH 10) in slurry form. Where, its reduction in free-HCHO reached 53 per cent, as well as modulus of rupture (MOR), modulus of elasticity (MOE), internal bond (IB) and TS of the produced boards were approximately 24.2 N/mm2, approximately 3753 N/mm2, approximately 0.84 N/mm2 and approximately 11.4 per cent, respectively.

Research limitations/implications

The eco-adhesive with relatively high percentage of low-cost commercial UF (70 per cent) and 30 per cent RB, as oil production by-product, in slurry form provides good board strength and is environmentally friendly compared to SCB-based composite properties, with that produced from commercial UF. The mechanical (MOR, MOE and IB) and water-resistance properties of the produced composite comply with the standard values.

Practical implications

The approach provided low HCHO-free UF adhesive with good comparative board strength and water resistance and reasonable working life. Replacing 30 per cent of UF by RB in slurry form and denaturalised at pH 10 is considered a promising inexpensive alternate adhesive (as E1) in the wood industry based on SCB wastes.

Social implications

Incorporating the RB by-product of oil production to commercial UF will be beneficial for saving the health of wood co-workers and motivating the wood mill to export its wood products.

Originality/value

It provided a potentially simple way to improve both the utilisation of commercial UF and SCB as industrial substrates for particle-board production. This will benefit farmers, local wood mills in Upper Egypt, significantly. Meanwhile, incorporating low percentage of RB, as oil-mill by-products, is promising to partly replace UF resin in the wood industry, minimising formaldehyde emission or toxic gasses during board formation.

Details

Pigment & Resin Technology, vol. 43 no. 4
Type: Research Article
ISSN: 0369-9420

Keywords

1 – 2 of 2
Per page
102050