Search results

The purpose of this paper is to discuss the operation of new generation electromagnetic current-to-voltage transducer. The aim of research was analysis of behaviour of considered current-to-voltage transducers during operation. The main problem was to estimate whether the external fields are able to change the value of the secondary voltage and that the replacement of the casing material by a conductive or ferromagnetic material will increase the immunity of the transducer to external magnetic fields. The immunity of current-to-voltage transducers to the external fields is very important because it influences the proper functioning of the protection system.

The use of analytical methods to assess the influence of external fields was impossible due to the complexity of the geometry. The 3D computations were necessary because of different cross sections of circuit boards at different heights. Therefore the numerical 3D field-and-circuit method based on finite element method was applied. The wide range of dimensions in computation system, ranging from 0.15 mm (print paths) to 0.22 m, made it necessary to use the mesh of millions of elements. The division of this type of system into elements requires a diverse and extremely dense mesh in the area of printed circuits board (PCBs).

The 3D analysis of magnetic field distribution was performed for different external field effect upon a current-to-voltage transducer. The magnetic field distributions and the induced secondary voltage for several different cases were presented. As a conclusion it can be said that in this particular case the magnetic shield is most effective. The influence of external magnetic fields caused by currents passing through the other neighbouring phase bars near are insignificant for the transducer with non-magnetic core.

Commonly used in measuring and protection systems of the transmission lines are induction instrument transformers. The instrument transformers are very precise devices and their errors are counted in tenths of a per cent, and phase displacement of signals in minutes. Especially in HV systems they are very big and their cores are heavy. Replacement of instrument transformers by the current to voltage transducers cooperating with electronic measuring systems will reduce the size and cost of devices.

The requirements set for protective current transformers concern the transformation of currents, with high accuracy, especially at transient states. Therefore magnetic characteristics of their cores should be linear. It causes that cores are large and have some air gaps. Current-to-voltage transducers based on Rogowski coil are particularly suitable for the replacement of the protective current transformers because of their linearity. The traditional technologies used for making Rogowski coil consisted in winding a wire on a non-magnetic carcass. The development of technology has enabled the use of new technologies PCB high density interconnect in the production of Rogowski coil.

The purpose of this paper is to consider a constructional solution of the combined instrument transformer: constructed so that the voltage part is a column transformer, which means that the magnetic circuit of it is open and situated into a composite insulator. The aim of this research was to achieve optimal configuration of open magnetic circuit of the column voltage transformer.

The authors made analyses of electromagnetic field distribution and computed the voltage error and phase displacement for many different cases of magnetic circuits of the column voltage transformers. The analyses of the electromagnetic field distribution and computations were carried out using the 3D field‐circuit method based on the finite‐element numerical method. The results were compared with tests of a real‐life model.

The result of research is the selection of the best constructional version of the column voltage transformer; the research also gives some guidelines for design and manufacture of this construction of combined transformers.

The paper is meant for constructors of instrument transformers and presents results of research into new constructional solutions of combined transformer.

Problems of correct estimation of metrological characteristics of current transformers based on constructional data and working conditions are of great importance. Applying the commonly known equivalent circuit of the current transformer requires its parameters to be determined correctly. A method for determining the equivalent circuit parameters of a current transformer, based on its field models, is shown in this paper. The results obtained using field computation and real‐life model tests are compared.