Search results

The purpose of this paper was to create a generic and flexible framework for the exploration, evaluation and side-by-side comparison of novel propulsion architectures. The intent for these evaluations was to account for varying operation strategies and to support architectural design space decisions, at the conceptual design stages, rather than single-point design solutions.

To this end, main propulsion subsystems were categorized into energy, power and thrust sources. Two types of matrices, namely, the property and interdependency matrices, were created to describe the relationships and power flows among these sources. These matrices were used to define various electrified propulsion architectures, including, but not limited to, turboelectric, series-parallel and distributed electric propulsion configurations.

As a case study, the matrices were used to generate and operate the distributed electric propulsion architecture of NASA’s X-57 Mod IV aircraft concept. The mission performance results were acceptably close to the data obtained from the literature. Finally, the matrices were used to simulate the changes in the operation strategy under two motor failure scenarios to demonstrate the ease of use, rapidness and automation.

It was seen that this new framework enables rapid and analysis-based comparisons among unconventional propulsion architectures where solutions are driven by requirements.

The purpose of this study is to examine state-of-the-art in hybrid-electric propulsion system modeling and suggest new methodologies for sizing such advanced concepts. Many entities are involved in the modelling and design of hybrid electric aircraft; however, the highly multidisciplinary nature of the problem means that most tools focus heavily on one discipline and over simplify others to keep the analysis reasonable in scope. Correctly sizing a hybrid-electric system requires knowledge of aircraft and engine performance along with a working knowledge of electrical and energy storage systems. The difficulty is compounded by the multi-timescale dynamic nature of the problem. Furthermore, the choice of energy management in a hybrid electric system presents multiple degrees of freedom, which means the aircraft sizing problem now becomes not just a root-finding exercise, but also a constrained optimization problem.

The hybrid electric vehicle sizing problem can be sub-divided into three areas: modelling methods/fidelity, energy management and optimization technique. The literature is reviewed to find desirable characteristics and features of each area. Subsequently, a new process for sizing a new hybrid electric aircraft is proposed by synthesizing techniques from model predictive control and detailed conceptual design modelling. Elements from model predictive control and concurrent optimization are combined to formulate a new structure for the optimization of the sizing and energy management of future aircraft.

While the example optimization formulation provided is specific to a hybrid electric concept, the proposed structure is general enough to be adapted to any vehicle concept which contains multiple degrees of control freedom that can be optimized continuously throughout a mission.

The proposed technique is novel in its application of model predictive control to the conceptual design phase.

The purpose of this paper is to analyze and compare the performances of novel roadable personal air vehicle (PAV) concepts that meet established operational requirements with different types of engines.

The vehicle configuration was devised considering the dimensions and operational restrictions of the roads, runways and parking lots in South Korea. A folding wing design was adopted for road operations and parking. The propulsion designs considered herein use gasoline, diesel and hybrid architectures for longer-range missions. The sizing point of the roadable PAV that minimizes the wing area was selected, and the rate of climb, ground roll distance, cruise speed and service ceiling requirements were met. For various engine types and mission profiles, the performances of differently sized PAVs were compared with respect to the MTOW, wing area, wing span, thrust-to-weight ratio, wing loading, power-to-weight ratio, brake horsepower and fuel efficiency.

Unlike automobiles, the weight penalty of the hybrid system because of the additional electrical components reduced the fuel efficiency considerably. When the four engine types were compared, matching the total engine system weight, the internal combustion (IC) engine PAVs had better fuel efficiency rates than the hybrid powered PAVs. Finally, a gasoline-powered PAV configuration was selected as the final design because it had the lowest MTOW, despite its slightly worse fuel efficiency compared to that of the diesel-powered engine.

Although an electric aircraft powered only by batteries most capitalizes on the operating cost, noise and emissions benefits of electric propulsion, it also is most hampered by range limitations. Air traffic integration or any safety, and noise issues were not accounted in this study.

Aircraft sizing is a critical aspect of a system-level study because it is a prerequisite for most design and analysis activities, including those related to the internal layout as well as cost and system effectiveness analyses. The results of this study can be implemented to design a PAV.

This study can contribute to the establishment of innovative PAV concepts that can alleviate today’s transportation problems.

This study compared the sizing results of PAVs with hybrid engines with those having IC engines.