Search results

Predicting the critical velocity is crucial at the instability threshold for shell and tube heat exchangers in order to prevent tube failure due to vibrations. In this study, the vibration response of an aluminum tube bundle subjected to water cross flow was analyzed experimentally. Aluminum tubes are preferred over steel tubes because of aluminum tubes' excellent corrosion resistance, ease of manufacture, and high thermal efficiency.

The fluid elastic instability and vortex shedding mechanisms in a finned tube array of aluminum tubes with a base tube diameter of 19.05 mm and pitch of 34 mm were investigated. The current study considers parallel triangular finned tube arrays with fin heights of 3 mm and 6 mm with a uniform fin thickness and fin pitch. The plain tube array was tested to compare the finned tube array results. The tube vibration response was measured using an accelerometer mounted on the middle tube of the third row. In order to define the fluid elastic instability behavior of various tube arrays, the critical velocity at the instability threshold is measured. By finding the Strouhal number at the small peaks before instability, the vortex shedding behavior of the tube arrays is examined.

The results reveal that the critical velocity at instability for coarse finned tube arrays increases as the fin height increases. The effect of the tube material is evaluated by comparing the results with those previously reported for parallel triangular tube arrays made of steel. Finally, the occurrence of vortex shedding in a tube array is confirmed based on the Reynolds number and Strouhal number relationship. The instability constant K for the plain tube array of steel and aluminum material are 4.97 and 4.87, respectively.

This paper provides the research findings on the effect of fin height on coarse density finned tube array. This will add substantial knowledge to the literature in the field of fluid elastic instability and vortex shedding, which is needed for the safe functioning of shell and tube heat exchangers.

The purpose of this paper is to present investigations on the significant influence of the tube material and fin density on fluid elastic instability and vortex shedding in a parallel triangular finned tube array subjected to water cross flow.

The experiment was conducted on finned tube arrays with a fin height of 6 mm and fin density of 3 fins per inch (fpi) and 9 fpi. A dedicated setup has been developed to examine fluid elastic instability and vortex shedding. Nine parallel triangular tube arrays with a pitch to tube diameter ratio of 1.78 were considered. The plain tube arrays, coarse finned tube arrays and fine finned tube arrays each of steel, copper and aluminium materials were tested. Plain tube arrays were tested to compare the results of the finned tube arrays having an effective tube diameter same as that of the plain tube.

A significant effect of fin density and tube material with a variable mass damping parameter was observed on the instability threshold. In the parallel triangular finned tube array subjected to water cross flow, a delay in the instability threshold was observed with an increase in fin density. For steel and aluminium tube arrays, the natural frequency is 9.77 Hz and 10.38 Hz, which is close to each other, whereas natural frequency of the copper tubes is 7.40 Hz. The Connors’ stability constant K for steel and aluminium tube arrays is 4.78 and 4.87, respectively, whereas it is 5.76 for copper tube arrays, which increases considerably compared to aluminum and steel tube arrays. The existence of vortex shedding is confirmed by comparing experimental results with Owen’s hypothesis and the Strouhal number and Reynolds number relationship.

This paper’s results contribute to understand the effect of tube materials and fin density on fluid elastic instability threshold of finned tube arrays subjected to water cross flow.

This paper aims to analyze the effect of fin geometry on mechanisms of flow induced vibration. Finned tube arrays are used in a heat exchanger to increase its efficiency. Therefore, it is necessary to investigate the effect of geometric parameters of the fin fluid elastic instability and vortex shedding. In this paper, the effect of fin height, fin density and tube pitch ratio for parallel triangular tube array on fluid elastic instability and vortex shedding is analyzed.

Experimental analysis was carried out on a parallel triangular finned tube array with a pitch ratio of 1.79 subjected to water crossflow. The experimentation aims to study fluid elastic instability and vortex-induced vibration mechanism responsible for flow induced vibration for finned tube array. A fully flexible finned tube array of the copper tube was used with its base diameter of 19.05 mm and thickness of 2 mm. Over the tube surface, crimped fins of height 6 mm and the same material are welded spirally with fin density 8.47 mm and 2.82 mm. Experimental analysis was carried out on a test setup developed for the same. The results obtained for the finned tube array were compared with those for the plain tube array with the same base tube diameter.

For parallel triangular tube array of copper material, test results show that critical velocity increases with an increase in fin pitch density for low pitch tube array. Before the occurrence of instability, the rate of growth in tube vibrations is high for plain tubes compared to that with fin tubes. The results based on Owen’s hypothesis show vortex shedding before the occurrence of fluid elastic instability. The effect of fin geometry on vortex-induced forces is analyzed. For the tube array pattern understudy, the values of Conner’s constant K for coarse fin-tube and fine fin tube array are obtained, respectively, 6.14 and 7.25.

This paper fulfills the need for research on the effect of fin geometry on fluid elastic instability and Vortex shedding on a tube array subjected to water cross flow when the pitch ratio is less than two, i.e. with a low pitch ratio.

The All India Institute of Medical Sciences (AIIMS) is a premier medical institution in India that has significantly contributed to cancer research. This study aims to highlight the cancer research productivity of AIIMS by assessing the impact and reach of the institution’s research output.

The study was based on 2,078 published papers on cancer of AIIMS indexed in the Web of Science (WoS) database from 1989 to 2021. A combination of tools such as Microsoft Excel, Biblioshiny, BibExcel and VOSviewer was used to evaluate and visualize the selected data.

The analysis revealed the interdisciplinary nature of research outputs, which have collaborative contributions from various fields such as oncology, pathology, radiology and surgery. The most productive research area within cancer was found to be breast cancer. In terms of international collaboration, the analysis revealed that AIIMS has a strong presence in the global cancer research community, with collaborations with researchers from more than 50 countries.

This study has some limitations. First, the study is limited to using only the WoS Core Collection database. Other databases, such as Scopus and PubMed, were excluded. Second, there is ambiguity in author names and nonuniformity in the institutions’ names, which can significantly affect the study’s outcomes.

Identifying research productivity in cancer at AIIMS aids resource allocation, collaboration and strategic planning, enhancing India’s overall cancer research impact and patient outcomes.

To the best of the authors’ knowledge, this study is to use scientometric indicators to evaluate AIIMS’s research productivity with particular reference to cancer for the first time. This detailed analysis provides a deeper understanding of AIIMS’s contribution to cancer research and its potential implications.