Search results

The purpose of the study is to design and develop an pervasive and smart Internet of Things (IoT)-based sensor system to monitor he real-time intravenous (IV) fluid bag level.

This paper investigates such issue and performs several experiments to develop a non-invasive, semi-automatic system to monitor IoT-based IV fluid level in real-time.

The outcome of this study is a prototype hardware that includes an ESP8266 based embedded Web server to disseminate the fluid exhaust status flag to its connected users. Nurses can get the prompt intimation about the status of IV fluid bag whether it is about to get empty.

IoT is the backbone of the proposed system. Multi-master system need to be studied in future.

Non-invasive and real-time IoT-based novel technique is developed with power-efficient and cost-effective pervasive sensors.

This is applicable for pervasive and assistive e-health-care services by care givers and medical professionals.

The deployed system is controlled by ATtiny85 with help of LM35 temperature sensor. The results show a promising future of the proposed development in enhancing IoT-based smart health-care service in the coming days.

Background: Every so often, one experiences different physically unstable situations which may lead to possibilities of suffering through vicious physiological risks and extents. Dynamic physiological activities are such a key metric that they are perceived by means of measuring galvanic skin response (GSR). GSR represents impedance of human skin that frequently changes based on different human respiratory and physical instability. Existing solutions, paved in literature and market, focus on the direct measurement of GSR by two sensor-attached leads, which are then parameterized against the standard printed circuit board mechanism. This process is sometimes cumbersome to use, resulting in lower user experience provisioning and adaptability in livelihood activities. The purpose of this study is to validate the novel development of the cost-effective GSR sensing system for affective usage for smart e-healthcare.

This paper proposes to design and develop a flexible circuit strip, populated with essential circuitry assemblies, to assess and monitor the level of GSR. Ordinarily, this flexible system would be worn on the back palm of the hand where two leads would contact two sensor strips worn on the first finger.

The system was developed on top of Pyralux. Initial goals of this work are to design and validate a flexible film-based GSR system to detect an individual’s level of human physiological activities by acquiring, amplifying and processing GSR data. The measured GSR value is visualized “24 × 7” on a Bluetooth-enabled smartphone via a pre-incorporated application. Conclusion: The proposed sensor-system is capable of raising the qualities such as adaptability, user experience, portability and ubiquity for possible application of monitoring of human psychodynamics in a more cost-effective way, i.e. less than US$50.

Several novel attributes are envisaged in the development process of the GSR system that made it different from and unique as compared to the existing alternatives. The attributes are as follows: (i) use of reproductive sensor-system fabrication process, (ii) use of flexible-substrate for hosting the system as proof of concept, (iii) use of miniaturized microcontroller, i.e. ATTiny85, (iv) deployment of energy-efficient passive electrical circuitry for noise filtering, (v) possible use case scenario of using CR2032 coin battery for provisioning powering up the system, (vi) provision of incorporation of internet of things (IoT)-cloud integration in existing version while fixing related APIs and (vii) incorporation of heterogeneous software-based solutions to validate and monitor the GSR output such as MakerPlot, Arduino IDE, Fritzing and MIT App Inventor 2.

This paper is a revised version R1 of the earlier reviewed paper. The proposed paper provides novel knowledge about the flexible sensor system development for GSR monitoring under IoT-based environment for smart e-healthcare.

A country is vulnerable when it is susceptible to shocks. This chapter uses data from 34 developing countries to investigate vulnerability trends for them since the 1990s. We find that the level of economic development is inversely related to macroeconomic vulnerability. The countries that became less primarily vulnerable belong to the upper middle-income and middle-income groups; the reverse is true for most vulnerable countries up to 2014. Argentina and Papua New Guinea became more vulnerable from 2016 to 2020. Income plays a crucial role in deciding vulnerability in the globalization era. Geographical location is a key factor in measuring vulnerability, especially in African countries. But the reverse result took place in the de-globalization era. The majority of the upper middle-income and lower middle-income countries are among the most vulnerable. Surprisingly, lower-income groups include the nations with significantly lower IMV values.

The Indian pharmaceutical industry currently faces multiple challenges, including rising costs and slowing export growth, which in turn have limited its ability to expand presence in global canvas. Given the nature of sectoral dynamics, a pharmaceutical firm must undertake huge investments in R&D to introduce product innovation, in turn enhancing market share and sustaining profit streams. The development of novel medicines, confirmed by the granting of patent rights, provides a pharma company edge over its competitors. In addition, presence of innovator firms within the industry invigorates the sectoral value chain and raises efficiency. Hence, it is important to analyze whether granting patent rights enhances the exports of pharmaceutical products in the Indian context.

The current study explored this question using a simultaneous-equation framework. Specifically, the authors use the methods developed by Davidson and MacKinnon (1993) and Greene (2003) to obtain heteroscedasticity-consistent estimates. The time-series properties of the data were further probed, and robust estimates were used to test the theory. Methods developed by Baltagi (1981) have been used further to refine the authors’ estimations.

After controlling for relevant variables, it is observed that granting of patents caused a significantly positive impact on pharmaceutical exports. Furthermore, the change in the patent administration regime had a significant impact on patent fillings, which further impacted their exportability. Compared to patents granted patents filed had a higher impact on pharmaceutical exports.

This study attempts to apply the framework developed by Goldstein and Khan (1978) with necessary modifications to suit the context of a developing country. The application of the 3SLS method to estimate the export supply equation for pharmaceutical products is a novel approach to the research question in general and to the Indian context in particular. System autocorrelation and heteroscedasticity tests were performed to refine the results further.

The purpose of the experimental investigation was to optimize the process parameters of the fused deposition modeling (FDM) technique. The optimization of the process was performed to identify the relationship between the chosen factors and the tensile strength of acrylonitrile butadiene styrene (ABS) and carbon fiber polylactic acid (PLA) thermoplastic material, FDM printed specimens. The relationship was demonstrated by using the linear experimental model analysis, and a prediction expression was established. The developed prediction expression can be used for the prediction of tensile strength of selected thermoplastic materials at a 95% confidence level.

The Taguchi L9 experimental methodology was used to plan the total number of experiments to be performed. The process parameters were chosen as three at three working levels. The working range of chosen factors was the printing speed (60, 80 and 100mm/min), 40%, 60% and 80% as the infill density and 0.1mm, 0.2mm and 0.3mm as the layer thickness. The fused deposition modeling process parameters were optimized to get the maximum tensile strength in FDM printed ABS and carbon fiber PLA thermoplastic material specimens.

The optimum condition was achieved by the process optimization, and the desired results were obtained. The maximum desirability was achieved as 0.98 (98%) for the factors, printing speed 100mm/min, infill density 60mm and layer thickness 0.3mm. The strength of the ABS specimen was predicted to be 23.83MPa. The observed strength value was 23.66MPa. The maximum desirability was obtained as 1 (100%) for the factors, printing speed 100mm/min, infill density 60mm and layer thickness 0.2mm. The strength of the carbon fiber PLA specimen was predicted to be 26.23MPa, and the obtained value was 26.49MPa.

The research shows the useful process parameters and their suitable working conditions to print the tensile specimens of the ABS and carbon fiber PLA thermoplastics by using the fused deposition modeling technique. The process was optimized to identify the most influential factor, and the desired optimum condition was achieved at which the maximum tensile strength was reported. The produced prediction expression can be used to predict the tensile strength of ABS and carbon fiber PLA filaments.

The results obtained from the experimental investigation are useful to get an insight into the FDM process and working limits to print the parts by using the ABS and carbon fiber PLA material for various industrial and structural applications.

The results will be useful in choosing the suitable thermoplastic filament for the various prototyping and structural applications. The products that require freedom in design and are difficult to produce by most of the conventional techniques can be produced at low cost and in less time by the fused deposition modeling technique.

The process optimization shows the practical exposures to state an optimum working condition to print the ABS and carbon fiber PLA tensile specimens by using the FDM technique. The carbon fiber PLA shows better strength than ABS thermoplastic material.

New trends in global trade including rise in services, global value chains, and the digital economy are opening up important economic opportunities for women. Trade has the potential to expand women's role in the economy, decrease inequality, and expand women's access to skills and education. Trade can dramatically improve women's lives, creating new jobs, enhancing consumer choice, and increasing women's bargaining power in society. In Bangladesh economy, the women led micro, small, and medium enterprises (MSMEs) play a noteworthy role by providing services and goods, creating employment generation particularly for women (UN Women, 2020). According to an ILO report, the majority of female-owned SMEs in Bangladesh are involved in the trading sector, followed by the manufacturing and service sectors (Fatima, 2023). This chapter is based on the case studies on 50 women entrepreneurs in various levels in Bangladesh and 10 key informant interviews of government officials, business associations, academics, researcher, microcredit organizations. This is encouraging that due to government's women friendly policies and organizational supports along with better networking through social media in Bangladesh, more and more women of various backgrounds in Bangladesh are coming to business though still concentrated on few traditional areas but they are making space for themselves and creating employment for poorest segment of women and educated young women.

The context of skill creation and its development is fundamental to sustainable economic growth with vertical improvement in well-being. Now when it comes to the case of less developed countries, the implication of international trade in skill formation takes an idiosyncratic shape so far as our concern: a dearth of skill education and lack of evenness in access to skill education due to the underlying rampant and pronounced economic inequality (i.e., inequality in income and wealth) among people as what is quite typical. Against this backdrop, this chapter seeks to develop a general equilibrium model in line with Jones (1965 & 1971) and Beladi and Marjit (1996) to address how leveraging of foreign trade through technological modernization of exports may work toward skill formation in less developed economies with technological dualism, informalization, and disguised unemployment. Besides, this chapter brings to glare how benefit of such modernization toward skill development stands out to be weighed against a potential worsening of distributive justice in terms of rise in wage gap between skilled and unskilled workers. Moreover, this chapter seeks to overhaul the implication of liberalization of labor market in terms of dilution of minimum wage standard for human development. Thus, the bottom line is that comes up here forth that export modernization in name of improving external competitiveness and thereof attaining effective trade openness can promote skilled human but only risking an exacerbation of wage inequality.

This paper aims to test for spatial convergence in financial inclusion across major Indian states and union territories.

After initially building an Index of Financial Inclusion (IFI) for major Indian states between 2003 and 2016, exploratory spatial data analysis (ESDA) is employed to draw inferences about mean and variance of IFI. The paper then seeks to confirm the ESDA results through spatial panel regression techniques. Finally, spatial results are correlated with results from aspatial convergence measures.

The study finds that there is no evidence of spatial convergence in financial inclusion over the study period, suggesting that those states that were relatively less financially included remained so through the study period. The study also asserts the relevance of certain important determinants, namely, per capita income, infrastructure, industrialization and gender.

This study has two limitations. First, only banking institutions are considered in measuring financial inclusion. Second, due to lack of a consistent indicator of gender participation across states, we had to employ sex ratio as a proxy.

The study suggests that policies to expand financial inclusion in Indian states, especially those with low inclusion levels are likely to benefit neighbouring states also, thereby accelerating the financial inclusion drive across states.

The study is a first in the Indian context to estimate the spatial dependence of financial inclusion and provides relevant implications for policymakers and bankers to target financial inclusion schemes in backward states.

This paper aims to investigate the relationship of female participation in labor force with the cybersecurity maturity of nations and the enabling role of e-government development in moderating the same.

The authors have conducted fixed-effects regression using archival data for 149 countries taken from secondary sources. Furthermore, the authors have grouped the sample countries into four levels of cybersecurity maturity (unprepared, reactive, anticipatory and innovative) using clustering techniques, and studied the influence of their interest variables for individual groups.

Results show that female participation in labor force positively influences national cybersecurity maturity, and e-government development positively moderates the said relationship, thereby enabling the empowerment of women.

Encouraging broader participation of women in the labor force and prioritizing investments in e-government development are essential steps that organizations and governments may take to enhance a country’s cybersecurity maturity level.

This study empirically demonstrates the impact of the nuanced interplay between female participation in labor force and the e-government development of a nation on its cybersecurity maturity.