Search results

This paper aims to determine whether application of graphene layers to cuprammonium filaments affords the latter with excellent mechanical properties and improves their electrical properties. At the same time, a circuit model was established to explore the conductive mechanism of the filament. The actual model is used to verify the correctness of the model.

The cuprammonium filaments were desizing, the graphene oxide layer-by-layer sizing and reduction integration process by a continuous sizing machine. The electrical properties of mono- and multifilaments in the static condition, as well as the dynamic–mechanical properties of multifilaments, were analysed, and the related conductive mechanism of the filaments was deduced.

Cuprammonium filaments coated with graphene layers showed good electrical conductivity, and their volume resistance decreased to 4.35 O·cm with increasing number of graphene coats. The X-ray diffraction and thermogravimetric analysis results showed that the graphene layer treatment changed the crystallinity of the copperammonia filaments and improved the thermal stability of the filaments. In the dynamic case, filament resistance was calculated using the equivalent resistance model, and the fitting difference observed was small. This result confirmed the high fit of this circuit model.

Up to the knowledge from literature review, there are no reports on theoretical research on the relation between the electro-mechanical property and structure of conductive filaments.

Continuing our spotlight on services we bring you the incredible story of the UK's most outspoken and influential organisation on drug law and policy. Transform campaigns to remove prohibition and replace it with legal controls. After 12 years of campaigning, near bankruptcy and six months on the dole Danny Kushlick gives here a personal account of his rise from a drug counsellor to leading voice and foundation director in the pursuit of better, braver and more responsible drug policies.

If there is one troubling question planners have asked over and over again and have not satisfactorily answered, it is “What makes great companies go bad?” At least some answers may be found in Professor Danny Miller's book, The Icarus Paradox (HarperBusiness, 1990).

The subject company operates in a vigorously growing sector of the packaging market, with plants in most European countries. But could this disparate business function as a single company in a single (European) market? This article sets out some lessons learned from a pilot transnational implementation of a strategic management information system, designed to counter entrenched national business thinking in one European company and its subsidaries.

This paper aims to investigate the printability of photocurable PDMS with digital light processing (DLP) in terms of dimensional accuracy, mechanical properties, isotropy and postcure shrinkage.

The photocurable PDMS was made from methacrylated PDMS-macromer and 2,4,6-Trimethylbenzoyldi-Phenylphosphinate (TPO-L) photoinitiator. The PDMS was printed using different orientations, sizes and post-exposure conditions and then evaluated by tensile test and microscope to determine the printability.

Printed parts show good accuracy and low shrinkage, but high directionality in modulus, ductility and strength. The dimensional error is less than 2% and the shrinkage rates are less than 0.52%. In contrast, the modulus varies between 0.87 and 0.96 MPa depending on print orientation, elongation varies from 34.7% to 66.4% and strength varies from 0.23 to 0.49 MPa.

This study quantitatively characterizes the printability of photo curable PDMS with DLP, which has not been reported elsewhere. This paper also discusses the challenges of PDMS printing for future advancement.

This study aims to examine the impact of religiosity on fashion knowledge, consumer-perceived value and patronage intention.

This study applied purposive sampling method. The population size used a minimum number of samples (100) in the WarpPLS analysis. The inferential statistical technique used is structural equation modeling. A tool for analyzing the structural models is the partial least square method.

Religiosity is a consumer belief in religion, which does not generate fashion knowledge so that high and low religiousness cannot increase or decrease fashion knowledge. Consumer confidence in their religion can increase consumer-perceived value of Muslim fashion products. It causes consumers to behave positively toward future behavioral intentions, that is, the patronage intention. Consumer religiosity is not the cause of patronage intention so that the high or low level of religiousness does not increase or decrease in the willingness of consumers to visit the store (or patronage intention). Fashion knowledge has a positive influence on consumer-perceived value. Consumer knowledge of fashion can increase the patronage of consumer intention toward Muslim fashion products. Fashion knowledge brings the knowledge to consumers in regard to Islamic law that regulates the prohibited and allowed actions, especially in wearing fashion. The high or low level of consumer-perceived value does not provide a cause for increase or decrease in the willingness of consumers to revisit the store (or patronage intention).

With regard to the relationship between religiosity and knowledge, it is found that there are still limited studies and differences in the sectors studied regarding the influence of religiosity and knowledge. To the best of the authors’ knowledge, the religiosity variable in influencing consumer-perceived value has not been used in previous studies. Religiosity is associated with consumer-perceived value expressed as originality in this study because the researcher has not found this relationship in the previous studies. Regarding the relationship between religiosity and store patronage intention, it is found that there are still different opinions in the research results on the effect of religiosity and store patronage intention. Concerning the relationship between knowledge and consumer-perceived value, it is found that there are still different opinions in the research results on the effect of knowledge and consumer-perceived value. The authors found no use of the knowledge variable in influencing store patronage intention in previous research studies. Knowledge associated with store patronage intention is expressed as the originality trait in this study because the researcher has not found this relationship in the previous studies. As for the relationship between consumer-perceived value and store patronage intention, it is found that there are still different opinions in the research results of the study regarding the influence of consumer-perceived value and store patronage intention.