Search results

The purpose of this paper is to describe a system that provides the driver or the driving assistance system with the lateral position information of the vehicle on the lane in order to detect as early as possible run‐off‐road and then prevent a foreseeable crash.

A magnetized tape deposited on the road in the middle of the lane generates a magnetic field which is detected by on‐board sensors. Depending on the distance between the tape and the sensors, accurate positioning information can be estimated.

The use of at least five sensors makes it possible to obtain a 2 mm‐lateral‐positioning accuracy.

Magnetized tapes are relatively cheap to install and provide an accurate vehicle lateral positioning with low ‐cost magneto‐resistance on‐board sensors. In addition , a magnetization variation along the tape would allow information to be coded which could be then transmitted to the driver.

This paper aims to present phenomenological extensions and technical improvements of a recent research path on a potential operational scheme aiming at promoting an effective disasters risk reduction of built urban areas, namely, the proposal of a Certification of the Predisposition of Resistance of Edifices to Disasters.

The authors illustrate new steps of a multidisciplinary research conducted by merging different fields of study, such as disaster risk analysis, sustainable land use and urban planning, environmental assessment methods, different buildings safety topics and certification and auditing management systems tools.

This work is based on research developed in Italy by carrying out new tests in the coastal regions of Liguria and Tuscany to validate improvements and to confirm in different territories the assessment process of most significant natural and man-made hazards already included in the certification scheme previously developed on the basis of the continental regions of Lombardy and Piedmont.

Investigations and results give firmer foundations and exploitability to a certification such as the one presented here.

Through an empirical analysis of a consumption community, the purpose of this paper is to demonstrate that the theories of gift-giving, sharing and commodity exchange should not be kept separated but integrated into a unifying model.

The paper provides new evidence about Bookcrossing.com, whose members share and give books as gifts; that is, physical goods rather than digital ones as in most of the communities considered in the literature. This community is analysed with qualitative tools, such as netnography, personal interviews and participant observation.

The main result of the analysis of Bookcrossing is that gift-giving is not the only process responsible for value creation and distribution in consumption communities: sharing and commodity exchange also play a role. Furthermore, the paper provides new evidence about aspects of gift-giving and sharing that have received limited attention in the literature: collective reciprocity and anonymous sharing.

The limitations are related to the intrinsic properties of the methods employed (netnography, personal interviews and participant observation) and to the paper, which analyses only one community and one product category. The implications refer to the role of gift-giving in consumption communities and its relationships with other processes: consumer gift systems are not only gifting platforms, but they and the elements of sharing and commodity exchange need to be integrated.

The empirical evidence and implications matter for the organisation and management of collaborative consumption platforms and the way in which traditional business models could and should interact with these platforms in an increasing number of businesses.

The paper adds new evidence of and original insights into gift-giving and collective forms of exchange. Moreover, it provides managerial implications of the analysed community for the book publishing industry.

This paper aims to investigate what drives the decision of small non-food store retailers to develop a relationship with the bank financing them. The analysis addresses the banking industry and quantifies the extent to which a decision to develop a relationship is influenced by satisfaction, trust and by two different kinds of values, namely, monadic and dyadic.

The analysis is based on data collected from more than 400 small business by means of a questionnaire, and develops a structural equation model to estimate the impact of satisfaction, trust and value constructs on the intention to develop the relationship.

The results show that satisfaction and trust do not exert a direct effect on the decision to develop the relationship that is directly determined by dyadic value (i.e. the comparison between the cumulated value given through time and the cumulated efforts sustained by the partner). In turn, dyadic value stems from monadic value (i.e. the self-centred comparison of the costs and benefits experienced within the relationship). In a nutshell, considering value perceptions by the business partner and the relational dimension of value provides a better understanding of the intention of small firms to develop their relationship with a financing bank.

This study contributes to shaping a picture of the motivations that lead small firms to develop a relationship with their financing bank. Drawing from a heterogeneous literature and considering individual-level variables, a theoretical model is developed to include the relational dimension of value and value perceptions by the business partner in the relationship. The empirical analysis provides useful indications to practitioners to understand and effectively manage the partner’s decision to develop the relationship, suggesting where to intervene.

This concluding contribution draws together key issues discussed in the various chapters of the book and connects them with future trends for tourism education. It places task in the changing world of higher education in general, and discusses changes in knowledge acquisition, ways of learning, knowledge content, and the role of educators in the future. This coverage leads to new learning technologies and their impact on the learning spaces of the future. Finally, the chapter discusses how projected tourism education programs can be designed to address society’s needs at this critical juncture in the history of the mankind. Creating responsible leaders for this global industry is perhaps the most important goal of future tourism education.

This study investigates the impacts of green space and air quality on crime rates for Organisation for Economic Co-operation and Development (OECD) countries over the 2003–2017 period.

By building an international data set, including both green space and air pollution at the same time in the model, and considering the potential endogeneities between variables, the study brings some novelties to the existing literature. Using the United Nations Crime Trends Survey and World Development Indicators databases, a panel data set of 37 OECD countries for 2003–2017 period was collected. To avoid the potential endogenous relationships between variables, the system-Generalized Method of Moments (system-GMM) method was applied.

The findings suggest that increases in green space reduce the crime rate, while increases in air pollution raise it. Additionally, the estimated control variables show that there are many statistically significant factors that determine the crime rate. In all the additional models, the effects of green space and air pollution were estimated consistently, which can be taken as a sign that the findings are robust.

The evidence of the study explicitly reveals that environmentally friendly policies provide benefits in terms of reducing crime rates as well as other known benefits. On the other hand, to represent the environmental dimension, this is the first study which uses a cross-country data set including both green space and air pollution in the model at the same time. Second, the issue has not been previously dealt with for OECD countries. Thirdly, the study considered the potential endogeneity between variables, and to check the robustness of the findings, some prominent factors affecting the crime rate were used as control variables.

This study aims to evaluate the potential of using the in-nozzle impregnation approach to reuse recycled PET (RPET) to develop continuous banana fiber (CBF) reinforced bio-composites. The mechanical properties and fracture morphology behavior are evaluated to establish the relationships between layer spacing–microstructural characteristics–mechanical properties of CBF/RPET composite.

This study uses RPET filament developed from post-consumer PET bottles and CBF extracted from agricultural waste banana sap. RPET serves as the matrix material, while CBF acts as the reinforcement. The test specimens were fabricated using a customized fused deposition modeling 3D printer. In this process, customized 3D printer heads were used, which have a unique capability to extrude and deposit print fibers consisting of a CBF core coated with an RPET matrix. The tensile and flexural samples were 3D printed at varying layer spacing.

The Young’s modulus (E), yield strength (sy) and ultimate tensile strength of the CBF/RPET sample fabricated with 0.7 mm layer spacing are 1.9 times, 1.25 times and 1.8 times greater than neat RPET, respectively. Similarly, the flexural test results showed that the flexural strength of the CBF/RPET sample fabricated at 0.6 mm layer spacing was 47.52 ± 2.00 MPa, which was far greater than the flexural strength of the neat RPET sample (25.12 ± 1.94 MPa).

This study holds significant social implications highlighting the growing environmental sustainability and plastic waste recycling concerns. The use of recycled PET material to develop 3D-printed sustainable structures may reduce resource consumption and encourages responsible production practices.

The key innovation lies in the concept of in-nozzle impregnation approach, where RPET is reinforced with CBF to develop a sustainable composite structure. CBF reinforcement has made RPET a superior, sustainable, environmentally friendly material that can reduce the reliance on virgin plastic material for 3D printing.

This paper aims to account for the crafting of the constellation of brand and consumer values around an everyday product, that of bottled water. This paper situates the exponential growth of this market in its historical and cultural context, paying particular attention to the fostering of the “social conditions of possibility” for this product in the French market. The socio-historical context and the interplay of stakeholders to the respondents’ understanding and uses of bottled water, highlighting the importance of a range of factors that made this market and product resonate with their requirements, are linked.

This account responds to the call for more engagement with social theory in marketing and consumer research (Brownlie and Hewer, 2011). It also connects with recent scholarly pleas for a displacement of the consumer from the center of our analytic attention (Askegaard and Linnet, 2011; Holt, 2012). It does so by using the social praxeology approach associated with Pierre Bourdieu to study the affirmation and sedimentation of the practices surrounding the consumption of bottled water in France.

Influential institutional actors invoked discourses of purity, nature and health, juxtaposing these with the risks of tap water consumption. These were cemented by the influence of pediatricians who encouraged changes in family drinking habits which translated into long-term shifts in consumer behavior. By contrast to studies of different contexts, our respondents were greatly enamored by the materiality of the products themselves, using these in innovative ways for aesthetic pursuits. The social praxeology approach uncovers how brand and consumer value have been constructed in the French bottled water market.

This study is based on the historical development and growth of the market for bottled water in France. It would be a valuable exercise to investigate other contexts to determine whether the strategies of symbolic competition, especially the use of expert intermediaries rich in cultural capital that can be identified, are reflected elsewhere.

Bottled water producers will have to confront the issue of the resource-intensiveness of their products. This feature stands in marked contrast to the symbolic capital and points of differentiation that producers have weaved around bottled water. Such contradictions will be exposed by actors in other fields (e.g. the environmental movement). This can be expected to have an impact on the consumption and viability of this market in future.

This paper uses a philosophical framework – social praxeology – to chart the development, affirmation and exponential growth of the bottled water market. Via a combination of historical re-construction and empirical research, it highlights the interactive relationships between government, producers and consumers, uncovering brand and consumer value creation.

This paper aims to examine how the fields of social enterprise, social entrepreneurship and social innovation have theorised and applied the concepts of narrative and storytelling.

A literature review and subsequent thematic analysis were used. A keyword search of three databases identified 93 relevant articles that were subsequently reviewed for this paper.

Four main roles for storytelling and narrative were found in the literature: to gain support for social innovation, to inspire social change, to build a social-entrepreneurial identity and to debate the meaning and direction of social innovation itself.

Following the literature review, capacities and applications of storytelling and narrative in other, related fields are discussed to highlight practical use cases of storytelling that might currently be underdeveloped in the social enterprise and innovation sectors.

The paper argues that the social innovation and enterprise literature predominantly views storytelling as a form of mass communication, while often overlooking its ability to foster communal debate and organise intrapersonal dialogue as possible aspects of strategic thinking and innovation management in social enterprise, social entrepreneurship and social innovation.