Yang Tian, Dacian Tomus, Aijun Huang and Xinhua Wu
Selective laser melting (SLM) process is an additive manufacturing method that uses computer-aided design to fabricate complex components layer-by-layer. Surface roughness is one…
Abstract
Purpose
Selective laser melting (SLM) process is an additive manufacturing method that uses computer-aided design to fabricate complex components layer-by-layer. Surface roughness is one of the primary drawbacks of SLM process; hence, the purpose of this paper is to present a parametric study and optimisation of fundamental parameters, including scan power, speed, inclined angle and layer thickness on surface roughness during selective laser melting of Hastelloy X.
Design/methodology/approach
Parametric significance on surface finish was analysed using analysis of variance and response surface methodology. General agreement between predicted and measured values was achieved. Surface characteristics of both up-skin and down-skin with various angles were covered within the investigated range.
Findings
Both experimental and statistical analysis showed that surface roughness of up-skin was primarily influenced by scan power, inclined angle and layer thickness while down-skin was more affected by the former two factors. Melt pool shape and staircase size were found to determine the up-skin surface, whereas attached particles were responsible for down-skin surface roughness.
Originality/value
As per our understanding, this manuscript provides valuable insight into the surface quality problem of SLM, which is a very critical issue for up-grading the process for manufacturing real components. This manuscript helps promote improved knowledge and understanding of the attributes and capabilities of this rapidly evolving 3D printing technology. Moreover, it establishes usable processing window and helps obtain optimal conditions, thus offering useful information to professionals working in this field. By combining experiments with statistical analysis, both practice and theory relevant to SLM process are further developed.
Details
Keywords
Yang Tian, Dacian Tomus, Aijun Huang and Xinhua Wu
Limited research has attempted to reveal the different modes of the melt pool formation in additive manufacturing. This paper aims to study the mechanisms of surface roughness…
Abstract
Purpose
Limited research has attempted to reveal the different modes of the melt pool formation in additive manufacturing. This paper aims to study the mechanisms of surface roughness formation, especially on the aspect of melt pool formation which determine the surface profile and consequently significantly influence the surface roughness.
Design/methodology/approach
In this study, the conditions under which different modes of melt pool formation (conduction mode and keyhole mode) occur for the case of as-fabricated Hastelloy X using direct metal laser solidification (DMLS) are derived and validated experimentally. Top surfaces of uni-directionally built samples under various processing conditions are cut, grinded, polished and etched to reveal their individual melt pool morphologies. Similarly, up-skin (slope angle < 90°) and down-skin (slope angle > 90°) melt pool morphologies are also investigated to compare the differences. Surface tension gradients and resultant Marangoni flow, which dominate the melt flow in the melt pool, is also calculated to help better evaluate the melt pool shape forming.
Findings
Two types of melt pool formation modes are dominating in DMLS: conduction mode and keyhole mode. Melt pool formed by conduction mode generally has an aspect ratio of 1:2 (depth vs width) and is in elliptical shape. Appropriate selection of scanning laser power and speed are required to maintain a low characteristic length and width ratio to prevent ballings. Melt pool formed by keyhole mode has an aspect ratio of 1:1 or less. High-energy contour promotes formation of key-hole-shaped melt pool which fills the gaps between layers and smoothens the up-skin surface roughness. Low-energy contour scan is necessary for down-skin surface to form small melt pool profiles and achieve low Ra.
Originality/value
This paper provides valuable insight into the origins of surface quality problem of DMLS, which is a very critical issue for upgrading the process for manufacturing real components. This paper helps promote the understanding of the attributes and capabilities of this rapidly evolving three-dimensional printing technology and allow appropriate control of processing parameters for successful fabrication of components with sound surface quality.