Search results

The main purpose of taking up this work was to see the influence of metallic nanoparticles on various fabric properties. This paper emphasizes on mechanical, aesthetic and anti-bacterial properties of the polyester, cotton and polyester cotton-blended fabric samples.

Three fabrics, 100 per cent polyester, 100 per cent cotton and polyester cotton-blended (50:50), were procured from the market. They were subjected to mild washing treatment so that the fabrics could be impregnated with copper (Cu) nanoparticles following standard procedure. The characterization of Cu nano-loaded textiles has been done using various techniques such as scanning electron microscopy for surface morphology, X-ray fluorescence spectrometer for elemental analysis and Fourier transform infrared spectroscopy for chemical composition. However in this paper, the focus is on various fabric properties and influence of this treatment on them. Antimicrobial activity was measured as per AATCC 100 quantitative method.

The structural properties showed changes but not major ones. The impregnation of Cu nanoparticles is nothing but a chemical treatment, and it is not uncommon to find reduction in the mechanical properties of the specimen. Here also, the mechanical properties were studied but did not reveal any significant change. The aesthetic properties for cotton fabrics showed an improvement. Improvement in the anti-bacterial activity was observed for all the fabric samples but the improvement in cotton fabric is worth mentioning. Thus, nano treatment imparts anti-bacterial property without hampering the mechanical properties of the parent textiles.

It is usual to find changes in the various properties of the materials subjected to nano treatment or treatment of any sort. Though the fabric samples were subjected to similar treatment, the quantity of nanoparticles taken up by each of them was different. The reason behind this could be the difference in the crystallinity of the fabric samples. Polyester fabric showed the highest resistance, as it was least affected by the nano treatment given. Cotton fabrics composed of cotton fibers are amorphous in nature, hence showed better take-up and hence were more affected by the said treatment.

Cotton fabrics are the most favored fabric, especially in regions with hot climatic conditions. Even though these fabrics are very sought after, they have a major drawback related to the aesthetic appeal of the fabric. These fabrics have very poor resistance to the crease formation, as well as their ability to recover from the external deformation. But the study conducted on the fabric samples has shown favorable results for the cotton fabric. A significant improvement in their aesthetic and anti-bacterial activity was found. At present, textiles with nano finishing fall in niche market due to its higher cost. But finishing with in-house Cu nanoparticles may open up hygiene textiles for consumers at affordable rates.

Cotton is still the most popular natural fiber in most of the tropical and sub-tropical regions. People located in these places have a natural urge to wear fabrics made from cotton fibers. Due to the hot weather, sweating is natural. However, this tends to keep the skin in humid state resulting in various skin problems, as cotton is also prone to bacterial attack. But this work has shown positive results, meaning to say that cotton fabrics show improved resistance to the bacterial activity. Hence, its suitability for hygiene applications may soon become a reality.

It is true that a lot of work is being reported on nano materials and their application to textiles for various reasons. Recently, many reports are available related to finishing of textiles using nanoparticles. However, most of the researchers are using silver nanoparticles for the same. In this work, use of in-house Cu nanoparticles has been done to treat fabric samples, which is more economical than silver nano. Also quantity required to meet desired property with Cu nanoparticles is less than the conventional treatment. This work is a sincere attempt to prepare hygienic common textiles at economical rates using continuous application technique which offers durable efficacy against human pathogenic bacterium.

Fibre reactive dyes are very popular for cellulosic garments as they are environmentally safe and having good overall fastness properties. But application of these dyes requires a very high concentration of salt. The salt released from garment dyeing increases salinity in drain water stream which has a negative impact on environmental ecology. The present work aims to eliminate the usage of salt during dyeing of cotton goods with reactive dyes.

The methodology adopted here, for the elimination of salt in cotton dyeing, was based on the principle of cationisation (to develop a positive charge) of cotton. The same was achieved by subjecting the caustic pretreated cotton fabric samples to a treatment of 1, 2 dichloroethane followed by methylamine to introduce amino groups in the cellulose structure. The treated cotton when dyed from slightly acidic bath generates positive sites due to protonation in the amino group. The reactive dyes being anionic (negatively charged) in solution get attracted to the positive charges on the fibre which eliminates the salt requirements for satisfactory dye exhaustion.

The investigation was conducted for cold brand, hot brand and highly exhaustive reactive dyes. The modified cotton showed excellent dye exhaustion for all the dyes in the absence of salt. The treatment was found to improve the dye fixation also. The modification was assessed through elemental analysis.

This study may be further extended to viscose material after suitably modifying the treatment conditions.

A pretreatment to cotton which could eliminate the usage of salt in its dyeing with reactive dyes is revealed.

The study explored a newer technique of cotton dyeing without salt usage. Both garment dyeing units and fabric/yarn finishing industries would thus be helpful.

This study aimed to Simultaneous matching of color and antimicrobial properties of silk fabric treated with silver nanoparticle. The antimicrobial finishing using silver nanoparticles (AgNPs) is one of the most important finishing processes in the textile industry. Color matching is widely applied in the textile industry, but there has been a need for the prediction of AgNPs concentration for the matching of dyed silver-treated samples.

In this research, the silk fabrics were dyed with various concentrations of C.I. Acid Red 359 dye at 0.5, 1, 1.5 and 2 per cent (w/w). The dyed fabrics were then coated with AgNPs in several concentrations at 0.015, 0.030, 0.050, 0.100 and 0.250 ml/l. The prediction of dye and AgNPs concentrations were evaluated using single constant color matching and artificial neural network techniques.

The obtained results indicate that the accuracy of dye concentration prediction, as well as AgNPs concentration prediction, was improved by using a neural network method. Also, the correlation between actual and predicted dye and AgNPs concentrations in the best neural networks is more than the single constant color matching method.

Simultaneous antibacterial and color matching of nanosilver-treated fabric is novel. This method achieved acceptable accuracy for antibacterial and color matching.

The purpose of this paper is to examine the drivers of independent sales contractor (ISC) performance. As independently contracted sales agents, the ISC model is a growing method of non-permanent employment utilized in many sectors. Specifically, this study seeks to fill a gap in the literature related to the under-researched link between ISCs and organizational identification.

This study conducts an exploratory, mixed-methods study based on data collected from 189 ISCs from a professional services firm.

Results demonstrate that outcomes related to sales performance, retention and advocacy are influenced directly and indirectly by organizational identification. It also shows that tangible benefits related to financial and marketing values are the strongest predictors of ISC organizational identification. Intangible dimensions such as value congruence, management trust and embeddedness play a limited role in the model.

Results show that ISC sales performance is enhanced when an ISC views their identity and the identity of the firm as highly interdependent. These findings suggest that organizational identification can be a key performance indicator when evaluating the return on marketing investment for a firm.

This study provides some important guidance to managers responsible for ISCs. First, the study identifies the primary drivers of organizational identification. Specifically, the study demonstrates that financial and marketing benefits are the primary relational antecedents of organizational identification. Both value congruence and operational benefits play relatively minor roles. Similarly, the results show that both organizational identification and historic sales performance are critical predictors of sales performance.

Few researchers have examined the link between ISCs and organizational identification. Organizational identification is of particular importance in the study of ISCs, as they possess the dual identity of an independent agent and that of a sales representative of the firm they are under contract. This study contributes to existing literature by extending previous studies that examine antecedents of sales performance.

The purpose of this paper is to clarify whether there are differences in the implementation of quality management (QM) and the results achieved, based on the position of the person responsible for QM and his/her strategic priorities.

Data from 256 firms that have implemented QM are collected. A multigroup analysis with LISREL is employed to contrast the hypotheses using a sample of general managers on the one hand and of quality managers on the other.

This study shows that QM is stronger implemented when it is headed by the general manager than by the quality manager. The authors also find that in both samples of general managers and quality managers, only one of the three strategic priorities analyzed, cost orientation, shows a positive effect on financial results. When the influence of QM on financial results is considered, the relationship is significant just in the case of the sample of quality directors.

The limitations of the analysis performed suggest lines of research that can substantially enrich the analysis of the role of management in the implementation of QM systems. A first step would be to expand the study sample, since the subsample for general managers was not very large. Gathering more recent data could contribute to strengthening the results obtained and to identifying additional explanatory variables. For example, information on functional experience or training could clarify the strategic focus adopted by managers.

This study highlights that the general manager's commitment to quality confers greater credibility in the rest of the organization. Although the general managers impose greater implementation of QM, they do not perceive that this influences the financial results achieved directly. The incorporation of strategic priorities in this study also shows that the perception of differentiation in marketing in firms that have implemented QM is similar both for quality managers and for general managers. However, the former (quality managers) also show that differentiation in innovation has a positive effect on QM.

Literature has shown an indisputable consensus on the relevance of leadership and the commitment of top management to the success of QM, but few studies provide more in‐depth specific knowledge of the characteristics and actions developed by the person who leads the commitment to quality. This study tackles the role of the manager responsible for QM in the firm, based on his or her functional position, whether general manager or quality manager. It contributes by investigating how a manager's strategic priorities condition the level of QM implementation, as well as the financial performance achieved.

Bacterial cellulose (BC) is an ideal alternative filtering material. However, current functionalization approaches for BC have not been fully discovered industrially as well as academically applying textile processing. This study aims to create a sustainable fabric-like membrane made of BC/activated carbon (AC) for applications in filtration using textile padding method, to protect people from respiratory pandemics.

Fabric-like BC is first mechanically dehydrated then AC is loaded via a textile padding step. The finishing efficacy, properties of fabric-like BC/AC and NaOH pretreatment are analyzed and characterized by scanning electron microscope (SEM), field emission scanning electron microscope (FE SEM), X-ray diffraction (XRD), CIELab color space, color strength (K/S), nitrogen adsorption-desorption isotherm including Brunauer–Emmett–Teller (BET) specific surface area and Barrett–Joyner–Halenda (BJH) pore size and volume.

This research results in a fabric-like BC/AC with pore diameters of 3.407 ± 0.310 nm, specific surface area of 115.28 m²/g and an efficient scalable padding process, which uses 8 times less amount of chemical and nearly 30 times shorter treating duration than conventional methods.

Our globe is now consuming an alarming amount of non-degradable disposable masks resulting in massive trash buildup as a future environmental problem. Besides, current disposable masks requiring a significant upfront technological investment have posed challenges in human protection from respiratory diseases, especially for countries with limited conditions. By combining a sustainable material (BC) with popular padding method of textile industry, the fabric-like BC/AC will offer sustainable and practical values for both humankind and nature.

This research has offered an effective padding process to functionalize BC, and a unique fabric-like BC/AC membrane for filtration applications.

Dehydrated bacterial cellulose’s (BC) intrinsic rigidity constrains applicability across textiles, leather, health care and other sectors. This study aims to yield a novel BC modification method using glycerol and succinic acid with catalyst and heat, applied via an industrially scalable padding method to tackle BC’s stiffness drawbacks and enhance BC properties.

Fabric-like BC is generated via mechanical dehydration and then finished by using padding method with glycerol, succinic acid, catalyst and heat. Comprehensive material characterizations, including international testing standards for stiffness, bending properties (cantilever method), tensile properties, moisture vapor transmission rate, moisture content and regain, washing, thermal gravimetric analysis, derivative thermogravimetry, Fourier-transform infrared spectroscopy and colorimetric measurement, are used.

The combination of BC/glycerol/succinic acid dramatically enhanced porous structure, elongation (27.40 ± 6.39%), flexibility (flexural rigidity of 21.46 ± 4.01 µN m; bending modulus of 97.45 ± 18.20 MPa) and moisture management (moisture vapor transmission rate of 961.07 ± 86.16 g/m²/24 h; moisture content of 27.43 ± 2.50%; and moisture regain of 37.94 ± 4.73%). This softening process modified the thermal stability of BC. Besides, this study alleviated the drawbacks for washing (five cycles) of BC and glycerol caused by the ineffective affinity between glycerol and cellulose by adding succinic acid with catalyst and heat.

The study yields an effective padding process for BC softening and a unique modified BC to contribute added value to textile and leather industries as a sustainable alternative to existing materials and a premise for future research on BC functionalization by using doable technologies in mass production as padding.

While aiming to create methods for fibre recycling, the question of colours in waste textiles is also in focus; whether the colour should be kept or should be removed while recycling textile fibre. More knowledge is needed for colour management in a circular economy approach.

The research included the use of different dye types in a cotton dyeing process, the process for decolourizing and the results. Two reactive dyes, two direct dyes and one vat dye were used in the study. Four chemical treatment sequences were used to evaluate colour removal from the dyed cotton fabrics, namely, HCE-A, HCE-P-A, HCE-Z-P-A and HCE-Y-A.

The objective was to evaluate how different chemical refining sequences remove colour from direct, reactive and vat dyed cotton fabrics, and how they influence the specific cellulose properties. Dyeing methods and the used refining sequences influence the degree of colour removal. The highest achieved final brightness of refined cotton materials were between 71 and 91 per cent ISO brightness, depending on the dyeing method used.

Only cotton fibre and three different colour types were tested.

With cotton waste, it appears to be easier to remove the colour than to retain it, especially if the textile contains polyester residues, which are desired to be removed in the textile refining stage.

Colour management in the CE context is an important new track to study in the context of the increasing amount of textile waste used as a raw material.

The purpose of this paper is to give compiled information on previously applied cotton fabric surface modifications. The paper covered most of the modifications done on cotton fabric to improve its properties or to add some functional properties. The paper presented mostly studied research works that brought a significant surface improvement on cotton fabric.

Different previous works on surface modifications of cotton fabrics such as pilling, wrinkle and microbial resistance, hydrophobicity, cationization, flame retardancy and UV-protection characteristics were studied and their methods of modification including the main findings are well reported in this paper.

Several modification treatments on surface modification of cotton fabrics indicated an improvement in the desired properties in which the modification is needed. For instance, the pilling tendency, wrinkling, microbial degradation and UV degradation drawbacks of cotton fabric can be overcome through different modification techniques.

To the best of the author’s knowledge, there are no compressive documents that covered all the portions presented in this review. The author tried to cover the surface modifications done to improve the main properties of cotton fabric.

Chitosan is widely considered as a natural polymer and a diverse finish to impart antibacterial property and enhanced dye uptake of textiles. Herein, the authors have investigated the feasibility of using chitosan/starch blend as a thickener in screen printing of cellulosic fabrics with some natural dyes.

The polymeric blend of chitosan/starch was prepared and used as a thickener for screen printing with three natural dye extracts, namely, Curcuma tinctoria (turmeric), Beta vulgaris (beet) roots and Lawsonia alba (henna) leaves on cellulosic fabrics like cotton and viscose. The viscosity and rheological properties of print paste as a fresh and after overnight shelving were examined. The influence of polymeric blends on cellulosic fabrics' print properties was inspected by determining their colorfastness, rubbing fastness, tensile strength and antibacterial activity.

The results depicted that chitosan/starch blend as printing thickener increased the shade depth with good wet and dry rubbing fastness for all the test natural dyes. The antibacterial activity of resultant printed cellulosic fabrics was found to be satisfactory against broad-spectrum bacterial strains.

This study's outcome is the development of chitosan blend thickeners to print the cellulosic fabrics with indigenous natural dyes.

The authors found no previous report on the synthesis of chitosan-based antibacterial blend thickeners with three distinct natural dyes and their application in screen printing of native and regenerated cellulosic fabrics of cotton and viscose, respectively.