Search results

Metal matrix composites (MMC) has been a section which gives an overview of composite materials and owing to those exceptional physical and mechanical properties, particulate-reinforced aluminum MMCs have gained increasing interest in particular engineering applications. Owing to the toughness and abrasive quality of reinforcement components such as silicon carbide (SiC) and titanium carbide (TiC), such materials are categorized as difficult materials for machining. The work aims to develop the model for evaluating the machinability of the materials via the response surface technique by machining three distinct types of hybrid MMCs.

The combined effects of three machining parameters, namely “cutting speed” (s), “feed rate” (f) and “depth of cut” (d), together with three separate composite materials, were evaluated with the help of three performance characteristics, i.e. material removal rate (MRR), cutting force (CF) and surface roughness (SR). Response surface methodology and analysis of variance (ANOVA) both were initially used for analyzing the machining parameters results.

The contours were developed to observe the combined process parameters along with their correlations. The process variables were concurrently configured using grey relational analysis (GRA) and the composite desirability methodology. Both the GRA and composite desirability approach obtained similar results.

The results obtained in the present paper will be helpful for decision-makers in manufacturing industries, who work on metal cutting area especially composites, to select the suitable solution by implementing the Grey Taguchi and modeling techniques.

The originality of this research is to identify the suitability of process parameters combination based on the obtained research results. The optimization of machining parameters in turning of hybrid metal matrix composites is carried out with two different methods such as Grey Taguchi and composite desirability approach.

The purpose of this paper is to scrutinize the heat and mass transfer attributes of three-dimensional bio convective flow of nanofluid across a slendering surface with slip effects. The analysis is carried out subject to irregular heat sink/source, thermophoresis and Brownian motion of nanoparticles.

At first, proper transmutations are pondered to metamorphose the basic flow equations as ODEs. The solution of these ODEs is procured by the consecutive application of Shooting and Runge-Kutta fourth order numerical procedures.

The usual flow fields along with density of motile microorganisms for sundry physical parameters are divulged via plots and scrutinized. Further, the authors analyzed the impact of same parameters on skin friction, heat and mass transfer coefficients and presented in tables. It is discovered that the variable heat sink/source parameters play a decisive role in nature of the heat and mass transfer rates. The density of motile microorganisms will improve if we add Al-Cu alloy particles in regular fluids instead of Al particles solely. A change in thermophoresis and Brownian motion parameters dominates heat and mass transfer performance.

To the best of the knowledge, no author made an attempt to investigate the flow of nanofluids over a variable thickness surface with bio-convection, Brownian motion and slip effects.

The purpose of this paper is to propose the knowledge of thermal transport of magneto hydrodynamic non-Newtonian fluid flow over a melting sheet in the presence of exponential heat source.

The group of PDE is mutated as dimension free with the assistance of similarity transformations and these are highly nonlinear and coupled. The authors solved the coupled ODE’s with the help of fourth-order Runge–Kutta based shooting technique. The impact of dimensionless sundry parameters on three usual distributions of the flow was analyzed and bestowed graphically. Along with them friction factor, heat and mass transfer rates have been assessed and represented with the aid of table.

Results exhibited that all the flow fields (velocity, concentration and temperature) are decreasing functions of melting parameter. Also the presence of cross-diffusion highly affects the heat and mass transfer performance.

Present paper deals with the heat and mass transfer characteristics of magnetohydrodynamics flow of non-Newtonian fluids past a melting surface. The effect of exponential heat source is also considered. Moreover this is a new work in the field of heat transfer in non-Newtonian fluid flows.

The purpose of this paper is to address the combined effects of thermal radiation and chemical reaction on steady MHD mixed convective heat and mass transfer flow past a vertical surface under the influence of Joule and viscous dissipation.

The governing system of partial differential equations is transformed to dimensionless equations using dimensionless variables. The dimensionless equations are then solved analytically using perturbation technique.

With the help of graphs, the effects of the various important parameters entering into the problem on the dimensionless velocity, dimensionless temperature and dimensionless concentration fields within the boundary layer are discussed. The authors noticed that the velocity increases with an increase in the porosity parameter. An increase in the Prandtl number Pr, decreases the velocity and the temperature field. An increase in the radiation parameter, decreases the velocity and the temperature field. Also the effects of the pertinent parameters on the skin-friction coefficient and rates of heat and mass transfer in terms of the Nusselt and Sherwood numbers are presented numerically in tabular form.

To the best of the authors’ knowledge, recent this work has not been finished by any other researchers.

The purpose of this paper is to investigate the steady 2D buoyancy effects on MHD flow over a permeable stretching sheet through porous medium in the presence of suction/injection.

Similarity transformations are employed to transform the governing partial differential equations into ordinary differential equations. The transformed equations are then solved numerically by a shooting technique.

The working fluid is examined for several sundry parameters graphically and in tabular form. It is observed that with an increase in magnetic field and permeability of porous parameter, velocity profile decreases while temperature and concentration enhances. Stretching sheet parameter reduces velocity, temperature and concentration, whereas it increases skin friction factor, Nusselt number and Sherwood number.

Till now no numerical studies are reported on the effects of heat source and thermal radiation on MHD flow over a permeable stretching sheet embedded in porous medium in the presence of chemical reaction.

The purpose of this paper is to focus on MHD unsteady flow of Carreau fluid over a variable thickness melting surface in the presence of chemical reaction and non-uniform heat sink/source.

The flow governing partial differential equations are transformed into ordinary ones with the help of similarity transformations. The set of ODEs are solved by a shooting technique together with the R.K.–Fehlberg method. Further, the graphs are depicted to scrutinize the velocity, concentration and temperature fields of the Carreau fluid flow. The numerical values of friction factor, heat and mass transfer rates are tabulated.

The results are presented for both Newtonian and non-Newtonian fluid flow cases. The authors conclude that the nature of three typical fields and the physical quantities are alike in both cases. An increase in melting parameter slows down the velocity field and enhances the temperature and concentration fields. But an opposite outcome is noticed with thermal relaxation parameter. Also the elevating values of thermal relaxation parameter/ wall thickness parameter/Prandtl number inflate the mass and heat transfer rates.

This is a new research article in the field of heat and mass transfer in fluid flows. Cattaneo–Christov heat flux model is used. The surface of the flow is assumed to be melting.

This paper aims to analyze heat and mass transfer of magnetohydrodynamic (MHD) non-Newtonian fluids flow past an inclined thermally stratified porous plate using a numerical approach.

The flow equations are set up with the non-linear free convective term, thermal radiation, nanofluids and Soret–Dufour effects. Thus, the non-linear partial differential equations of the flow analysis were simplified by using similarity transformation to obtain non-linear coupled equations. The set of simplified equations are solved by using the spectral homotopy analysis method (SHAM) and the spectral relaxation method (SRM). SHAM uses the approach of Chebyshev pseudospectral alongside the homotopy analysis. The SRM uses the concept of Gauss-Seidel techniques to the linear system of equations.

Findings revealed that a large value of the non-linear convective parameters for both temperature and concentration increases the velocity profile. A large value of the Williamson term is detected to elevate the velocity plot, whereas the Casson parameter degenerates the velocity profile. The thermal radiation was found to elevate both velocity and temperature as its value increases. The imposed magnetic field was found to slow down the fluid velocity by originating the Lorentz force.

The novelty of this paper is to explore the heat and mass transfer effects on MHD non-Newtonian fluids flow through an inclined thermally-stratified porous medium. The model is formulated in an inclined plate and embedded in a thermally-stratified porous medium which to the best of the knowledge has not been explored before in literature. Two elegance spectral numerical techniques have been used in solving the modeled equations. Both SRM and SHAM were found to be accurate.

The purpose of this paper is to present an exploration of multiple slips and temperature dependent thermal conductivity effects on the flow of nano Williamson fluid over a slendering stretching plate in the presence of Joule and viscous heating aspects. The effectiveness of nanoparticles is deliberated by considering Brownian moment and thermophoresis slip mechanisms. The effects of magnetism and radiative heat are also deployed.

The governing partial differential equations are non-dimensionalized and reduced to multi-degree ordinary differential equations via suitable similarity variables. The subsequent non-linear problem treated for numerical results. To measure the amount of increase/decrease in skin friction coefficient, Nusselt number and Sherwood number, the slope of linear regression line through the data points are calculated. Statistical approach is implemented to analyze the heat transfer rate.

The results show that temperature distribution across the flow decreases with thermal conductivity parameter. The maximum friction factor is ascertained at stronger magnetic field.

In the current paper, the magneto-nano Williamson fluid flow inspired by a stretching sheet of variable thickness is examined numerically. The rationale of the present study is to generalize the studies of Mebarek-Oudina and Makinde (2018) and Williamson (1929).

This paper aims to simulate the steady laminar mixed convection incompressible viscous and electrically conducting hybrid nanofluid (CuO-Cu/blood) flow near the plane stagnation-point over a horizontal porous stretching sheet along with an external magnetic field and induced magnetic field effects that can be applicable in the biomedical fields like the flow dynamics of the micro-circulatory system and especially in drug delivery.

The basic partial differential equations (PDEs) are altered to a set of dimensionless ordinary differential equations (ODEs) with the help of suitable similarity variables which are then solved numerically using bvp4c scheme from MATLAB. Inasmuch as validation results have shown a good agreement with previous reports, the present novel mass-based algorithm can be used in this problem with great confidence. Governing parameters are both nanoparticle masses, base fluid mass, empirical shape factor of both nanoparticles, suction/injection parameter, magnetic parameter, reciprocal magnetic Prandtl number, Prandtl number, heat source parameter, mixed convection parameter, permeability parameter and frequency ratio. The effect of these parameters on the flow and heat transfer characteristics of the problem is discussed in detail.

It is shown that the use of CuO and Cu hybrid nanoparticles can reduce the hemodynamics effect of the capillary relative to pure blood case. Moreover, as the imposed magnetic field enhances, the velocity of the blood decreases. Besides, when the blade shapes for both nanoparticles are taken into account, the local heat transfer rate is maximum that is also compatible with experimental observations.

An innovative mass-based model of CuO-Cu/blood hybrid nanofluid has been applied. The novel attitude to one-phase hybrid nanofluid model corresponds to considering nanoparticles mass as well as base fluid mass to computing the solid equivalent volume fraction, the solid equivalent density and also solid equivalent specific heat.

Porous medium has always been introduced as an environment for increasing heat transfer in cooling systems. However, increase in heat transfer and resolving pressure drop in the fluid flow have been focused on by researchers.The purpose of this paper is to study the effects of creating porous micro-channels inside porous macro-blocks to optimize system performance in channels.

To simulate flow field, a developed numerical code that solves Navier–Stokes equations by finite volume method and semi-implicit method for pressure linked equations (SIMPLE) algorithm will be used together with bi-disperse porous medium (BDPM) method. Working fluid is air with Pr = 0.7 in laminar state. Influence of permeability changes by creation of micro-channels containing porous medium in vertical, horizontal and cross-shape patterns will be investigated.

By creating porous micro-channels inside macro-blocks, not only does the heat transfer increase significantly but the pressure also drops remarkably. Increase in performance evaluation criteria (PEC) is more evident in lower Reynolds numbers that can increase the PEC to 75 per cent by creating cross-shape micro-channels. By changing the permeability of micro-channels, PEC will increase by reducing the pressure drop but it has minor changes in Nu.

The current work is applicable to optimizing system performance by decreasing the pressure drop and increasing the heat transfer.

The developed patterns are useful in increasing the system performance including the increase in heat transfer and decrease in pressure drop in systems such as air coolers required in electrical circuits.

Development and optimization of system performance by new patterns using BDPM in comparison to the previous patterns.