Search results

1 – 1 of 1
Per page
102050
Citations:
Loading...
Access Restricted. View access options
Article
Publication date: 25 February 2019

Dániel Straubinger, Attila Géczy, András Sipos, András Kiss, Dániel Gyarmati, Oliver Krammer, Dániel Rigler, David Bušek and Gábor Harsányi

This paper aims to present a novel approach on investigating critical current densities in the solder joints of chip-size surface-mounted components or device (SMD) components and…

173

Abstract

Purpose

This paper aims to present a novel approach on investigating critical current densities in the solder joints of chip-size surface-mounted components or device (SMD) components and ball grid array (BGA) lead-free solder joints with the focus of via-in-pad geometries. The investigation involves a numerical approach and a physical validation with selected geometry configurations and high current loads to reveal possible failure sources. The work is a continuation of a previous study.

Design/methodology/approach

Current density was investigated using finite element modeling on BGA joints. Dummy BGA components, 0402 and 0603 zero ohm jumper resistors, were used, both in daisy chain setups on standard FR4 printed circuit boards (PCBs). Respective physical loading experiments were set to find effects of elevated current density at hot zones of the joints. Cross-section analysis, scanning electron microscopy and shear force tests were used to analyze the joints.

Findings

The findings reveal alterations in the joints, while the current loading is not directly affecting the structure. The modeling reveals the current density map in the selected formations with increased current crowding zones. Overall, the degradation does not reach the level of electromigration (EM)-induced voiding due to the limiting factor of the FR4 substrate.

Practical implications

The heavy current load affects joint reliability, but there are limitations of EM-induced failures on PCB-based assemblies due to the thermomechanical weakness of the FR4 material.

Originality/value

The experiments investigate current density from a novel aspect on frequently used BGA surface mounted components with modeling configurations focusing on possible effects of via-in-pad structure.

Details

Circuit World, vol. 45 no. 1
Type: Research Article
ISSN: 0305-6120

Keywords

1 – 1 of 1
Per page
102050