Search results

This paper examines diverging views on the Chongqing model, the policy experiment led by Bo Xilai from 2007 to 2012 that was famous for its “red songs” and the campaign against organized crime. It has impressed both the supporters of socialist identity of China and the supporters of liberal identity and led to an intense debate concerning China’s path of development. This paper attempts to discuss and clarify to what extent the Chongqing model represented a genuine socialist experiment and the implications of the model for China’s future.

The purpose of this paper is to contribute to the extant literature about the co-evolvement of Business Process Management (BPM) and the Internet of Things (IoT) by proposing the IoT-enabled Context-aware BPM (IoT-CaBPM) framework to bridge from the IoT infrastructure to context-aware business processes.

Motivated by the “Three Waves” of BPM research, IoT-enabled context-awareness is, therefore, expected to be achieved for enhancing the business process design, which pilots a new wave of BPR (Business Process Redesign/Reengineering) to enable the business process coevolve with IoT and analytics. This paper reports an illustrative case study of BPR in a Chinese bulk port, one of the hub seaports that widely adopted IoT technologies over the last few years.

The IoT implementation and data analytics has increased the efficiency and improve the monitoring effectively. The proposed IoT-CaBPM framework availably helps to identify and match nodes of IoT devices, business decisions and analytic models in order to redesign a business process towards context-aware variability. As IoT is rapidly becoming the new dominant IT paradigm is moving towards mature implementation in various industries, the corresponding BPR must be planned and executed strategically for achieving better benefits.

Despite some research extend BPM standard by integrating IoT devices as a sort of resources or report generically that the ports operations are affected by IoT, there is still a lack of layers from the IoT infrastructure to context-aware business processes. An industrial BPR case with business models in detail is also a lack for presenting the specific implications and effectiveness of the adoption of such technologies. This paper fills in this gap.

Electrical capacitance tomography (ECT) and electrical resistance tomography (ERT) are promising techniques for multiphase flow measurement due to their high speed, low cost, non-invasive and visualization features. There are two major difficulties in image reconstruction for ECT and ERT: the “soft-field”effect, and the ill-posedness of the inverse problem, which includes two problems: under-determined problem and the solution is not stable, i.e. is very sensitive to measurement errors and noise. This paper aims to summarize and evaluate various reconstruction algorithms which have been studied and developed in the word for many years and to provide reference for further research and application.

In the past 10 years, various image reconstruction algorithms have been developed to deal with these problems, including in the field of industrial multi-phase flow measurement and biological medical diagnosis.

This paper reviews existing image reconstruction algorithms and the new algorithms proposed by the authors for electrical capacitance tomography and electrical resistance tomography in multi-phase flow measurement and biological medical diagnosis.

The authors systematically summarize and evaluate various reconstruction algorithms which have been studied and developed in the word for many years and to provide valuable reference for practical applications.

With the continuous development of intelligent technologies, knowledge graph, the backbone of artificial intelligence, has attracted much attention from both academic and industrial communities due to its powerful capability of knowledge representation and reasoning. Besides, knowledge graph has been widely applied in different kinds of applications, such as semantic search, question answering, knowledge management, and so on. In recent years, knowledge graph techniques in China are also developing rapidly and different Chinese knowledge graphs have been built to support various applications. Under the background of “One Belt One Road (OBOR)” initiative, cooperating with the countries along OBOR on studying knowledge graph techniques and applications will greatly promote the development of artificial intelligence. At the same time, the accumulated experience of China on developing knowledge graph is also a good reference. Thus, in this chapter, the authors mainly introduce the development of Chinese knowledge graphs and their applications. The authors first describe the background of OBOR, and then introduce the concept of knowledge graph and three typical Chinese knowledge graphs, including Zhishi.me, CN-DBpedia, and XLORE. Finally, the authors demonstrate several applications of Chinese knowledge graphs.

The construction industry has been investigating “where Henry Ford is in the industry system.” Given that listed construction enterprises are the backbone of the promotion of the high-quality development of the industry, their research and innovation are of considerable importance. This study aims to comprehensively assess the research and development (R&D) status quo and trends within various types of construction enterprises in order to identify effective strategies to enhance R&D efficiency in the construction industry.

Based on the data won from annual reports and the CSMAR database for the period 2016–2020, this study examines 104 listed construction enterprises in China. By applying both the data envelopment analysis (DEA) method and the Malmquist productivity index, this research compares and analyzes the static and dynamic differences in R&D efficiency across different types of construction enterprises.

Results suggest that the magnitude of change in the Malmquist decomposition index of 104 listed construction enterprises gradually narrowed, but the comprehensive technological level remained relatively low. Although state-owned enterprises had an advantage in scale efficiency, meaning they could maximize output with given inputs, their technological progress efficiency, also known as the degree of technological innovation, was significantly lower than that of private enterprises. As one finding, state-owned enterprises in comparison with private enterprises experience significant R&D inefficiency. It represents the main cause of their low degree of technological innovation and efficiency.

This study assesses the R&D efficiency of listed construction enterprises in China from the perspective of different market segments, state-owned and private enterprises and suggests approaches to improve strategies for various corporate types. Thus, the study’s new findings contribute to addressing the challenge of low R&D levels in the construction industry in the fields of engineering, construction and architectural management.

The traditional drug development process is costly, time consuming and risky. Using computational methods to discover drug repositioning opportunities is a promising and efficient strategy in the era of big data. The explosive growth of large-scale genomic, phenotypic data and all kinds of “omics” data brings opportunities for developing new computational drug repositioning methods based on big data. The paper aims to discuss this issue.

Here, a new computational strategy is proposed for inferring drug–disease associations from rich biomedical resources toward drug repositioning. First, the network embedding (NE) algorithm is adopted to learn the latent feature representation of drugs from multiple biomedical resources. Furthermore, on the basis of the latent vectors of drugs from the NE module, a binary support vector machine classifier is trained to divide unknown drug–disease pairs into positive and negative instances. Finally, this model is validated on a well-established drug–disease association data set with tenfold cross-validation.

This model obtains the performance of an area under the receiver operating characteristic curve of 90.3 percent, which is comparable to those of similar systems. The authors also analyze the performance of the model and validate its effect on predicting the new indications of old drugs.

This study shows that the authors’ method is predictive, identifying novel drug–disease interactions for drug discovery. The new feature learning methods also positively contribute to the heterogeneous data integration.

This paper aims to understand how quantum leaders influence employee work behavior through effective tasks.

In this study, 516 questionnaires were collected using the interval data method to explore the triggering mechanisms and paths of emerging quantum leadership on constructive deviance.

The findings indicate that quantum leadership promotes constructive deviance through facilitating recovery experience (affective path), job crafting (task path) and the chained mediation path between the two. Additionally, the moderating effect of openness to experience strengthens the pathways between quantum leadership and recovery experience, and between quantum leadership and job crafting.

This study focuses closely on the mechanism of leadership behavior on employees, neglecting the psychological state and behavior of the leader as a key resource element in the work environment. Quantum leadership emphasizes value-bound characteristics, so the role played by quantum leaders may vary in different cultures and values.

First, this study calls for the organizational management focusing on the advantages of quantum leadership thinking and its positive effects in practice. Second, the mediating mechanisms of recovery experience and job crafting provide insights into how quantum leadership can be used to enhance constructive deviance. Third, this study elucidates how individual responses to organizational environment and leadership style vary in management practices. Our study helps managers better understand how individual characteristics, such as openness to experience, influence managerial behavior.

This study enriches the qualitative research on emerging “quantum” perspectives of leadership, expands the mechanism of employee constructive deviance and highlights the need for organizations to take measures that encourage constructive deviance by their employees, as this can lead to high-quality and long-term growth.

Based on conservation of resources theory, authors revealed the mechanisms by which quantum leadership influences employees’ constructive deviance, confirming the mediating role of recovery experience and job crafting as well as the moderating role of openness to employee experience. We explored the moderating mechanisms of the individual trait of openness to experience in the quantum leadership-to-job crafting and the recovery experience-to-job crafting.

The traction behaviours of lubricating oil significantly affect the stability and lubrication regime of aviation high-speed ball bearings. Rolling elements will slide at a low traction force (TF). Therefore, traction behaviours need to be studied, and a fitting expression for traction curves to rapidly calculate the traction coefficient (TC) should be developed.

The traction behaviours of an aviation lubricating oil were studied in severe operating conditions with a self-designed two-disc testing rig. Based on the least squares method and the Levenberg–Marquardt theory, a rapid calculation expression was developed by fitting the obtained traction curves. The correction of this expression was experimentally verified by comparing the TCs under different operating conditions. This expression was also used to modify the commonly accepted quasi-dynamic model of rolling bearings.

An increase of the load led to an increase in the TC. In comparison, the temperature and entrainment speed showed inverse effects. The proposed expression exactly predicted the trend of the experimentally acquired traction curve. The calculation with the modified dynamic model showed that the action of the TF on a single rolling element varied and that the temperature increase of the outer raceway is higher than the inner raceway, which is caused by the TF and relative sliding speed between the elements and raceways.

The proposed fitting expression is able to simplify the TC calculation of synthetic aviation lubricating oil in practical engineering applications. This paper can provide an important reference for the traction behaviour of synthetic aviation lubricating oil under severe conditions and assist with its rapid calculation and practical application in engineering.

This paper examines the evolving landscape of accounting and finance research on the Chinese capital market, building on a previous study published at Abacus in 2018.

By incorporating data from 1999 to 2023, our analysis offers a detailed examination of shifts in academic focus, methodological advancements and thematic expansions over the last quarter-century.

The study reveals a substantial increase in accounting and finance publications related to the Chinese capital market in both Tier 1 and Asia-Pacific journals. The dynamic growth of the Chinese capital market during this period reflects profound economic transformations, characterized by technological innovations, sustainability commitments and regulatory reforms.

We conclude that the globally important Chinese capital market has attracted increasing academic attention, significantly advancing the understanding of accounting and finance research in China’s capital market.

The purpose of this paper is to analyze the historical pattern of environmental cost due to grain production in China and to provide further implications of technologies and policies for the transformation of China’s agricultural development toward sustainable intensification.

The data sets about grain production, arable land and chemical fertilizer use in China were collected from FAO, NBSC, and IFA. Greenhouse gas emissions were estimated using life cycle assessments. The policies concerning grain production and the environment were collected from the Ministry of Agriculture, and the State Council of China.

China has produced enough food to feed its growing population, but has neglected the resource-environmental costs of grain production since 1978. Consequently, China’s grain production is always accompanied with a high cost of resource and environment sustainability. However, from 2006 to 2015, the growth rate of grain production has surpassed that of chemical fertilizer consumption, resulting in improvement in nutrient use efficiency and decreasing trends of environmental cost for grain production. This could be partially attributed to technology innovations, such as Soil-Testing and Fertilizer-Recommendations (STFR), soil quality and crop management improvement, and so on, and policy supports (policies of STFR, soil quality improvement, and high-yield construction). This indicated that China’s grain production is starting to transform from high-input and high-output model to “less for more.”

This study is the first to determine the detailed, historical role of technological innovation and agri-environmental policy on the sustainability of grain production in China. The findings should have significant implications for technology and policy for the transformation of China’s agriculture development to sustainable intensification.