Search results

This paper addresses a highly under-research question of employee voice in Belarus using labour process theory, specifically, Ramsay’s (1977) cycles of control theory to assess the evolution of voice at transitional periphery. Using the sample of 10 industrial enterprises, the paper explores the degree of management control over formal voice and the role of trade unions in defending of independent voice at the collective level. Informal voice at the individual level is also analysed. The findings demonstrate that the degree of direct control over formal voice in Belarus exceeds that in the Soviet Union due to suppression of independent trade union voice. The loss of workers’ control over the labour process has led to decreasing informal voice at the individual level. However, the earlier argument on workers’ patience is not supported due to a growing number of organised workers protests.

This paper presents an efficient procedure for reconstructing the aged region of ferromagnetic material.

The aging of the ferromagnetic material leads to changes of B ‐H relationship. This property may be used for detection of the degraded parts of ferromagnetic pieces. In numerical procedures the region with a possible aged zone is described by a finite number of subdomains where the flaw vector is defined with binary entries.

Because of the small B ‐H changes, the magnetic field modifications linearly depend (matrix T) by the flaw vectors. Using a double Gauss pivotation scheme, an enough well conditioned and invertible submatrix is extracted from the matrix T. The unknowns associated with this submatrix (called main unknowns) can be easily obtained by a linear relationship from the rest of the unknowns (called minor). In the set of the minor unknowns we search for that vector which gives the smallest error of the principal unknowns in comparison with the values 0 or 1.

This procedure leads to a spectacular increasing of the efficiency in comparison with the known procedures.

The purpose of this paper is to identify, explore, rank the relative importance and determine the prevalent allocation response trends of the major construction risk factors considered by general contractors operating in the State of Qatar.

A structured questionnaire survey comprising 37 potential risk factors was distributed to a statistically representative sample of contractors. The influence ranks of the factors explored were determined using the “Relative Importance Index (RII)” technique, whereas the prevalent trend of contractors’ attitudes toward risk allocation of each factor investigated was quantified and expressed as a percentage, based on the number of respondents who selected a specific option, in relation to the total number of respondents.

The results obtained indicate that risks related to the “client” group are perceived as most critical, followed by the “consultant”, “contractor” and “exogenous” group-related factors, respectively. The outcomes further show that the “transfer” option is the contractors’ prevalent response to “client” and “consultant”-related risks, while the “retention” decision is the principal pattern linked to “contractor” and “exogenous” group-related risk factors.

The dominant respondents’ perception that the crucial construction risks are related to clients and consultants suggests that these two parties have an essential role in controlling the negative ramifications of the associated factors.

The findings suggest that increasing designers’ awareness of the significant effect of applying the constructability concept can considerably help reducing the risks concomitant of the construction operation. Policy makers may contribute, moreover, in alleviating the risk of incompetent technical staff and operatives’ employment by controlling the migration of inexperienced and unskilled construction workforce into the State.

Given the knowledge gap for the major construction risk factors considered by general contractors in Qatar, the results reported in this study can provide clients, industry practitioners and policy makers with guidance to effectively manage the significant risks determined, which can further assist in achieving a reasonable level of competitiveness and cost-effective operation.

The construction industry has struggled to deliver schemes on time to budget and right-first-time (RFT). There have been many studies into nonconformance and rework through quantitative research over the years to understand why the industry continues to see similar issues of failure. Some scholars have reported rework figures as high as 12.6% of total contract value, highlighting major concerns of the sustainability of construction projects. Separately, however, there have been few studies that explore and detail the views of industry professions who are caught in the middle of quality issues, to understand their perceptions of where the industry is failing. As such, this paper interrogates qualitative data (open-ended questions) on the topic of nonconformance and rework in construction to understand what industry professionals believe are the causes and suggested improvement areas.

A qualitative approach is adopted for this research. An industry survey consisting of seven open-ended questions is presented to two professional working groups within a Tier 1 contractor, and outputs are analysed using statistic software (NVivo 12) to identify prominent themes for discussion. Inductive analysis is undertaken to gain further insight into responses to yield recurrent areas for continuous improvement.

Qualitative analysis of the survey reveals a persistent prioritisation of cost and programme over quality management in construction project. Furthermore, feedback from construction professionals present a number of improvement areas that must be addressed to improve quality. These include increased training and competency investment, overhauling quality behaviours, providing greater quality leadership direction and reshaping the way clients govern schemes.

There are limitations to this paper that require noting. Firstly, the survey was conducted within one principal contractor with varying levels of knowledge across multiple sectors. Secondly, the case study was from one major highways scheme; therefore, the generalisability of the findings is limited. It is suggested that a similar exercise is undertaken in other sectors to uncover similar improvement avenues.

The implications of this study calls for quality to be re-evaluated at project, company, sector and government levels to overhaul how quality is delivered. Furthermore, the paper identifies critical learning outcomes for the construction sector to take forward, including the need to reassess projects to ensure they are appropriately equip with competent personnel under a vetted, progressive training programme, share collaborative behaviours that value quality delivery on an equal standing to safety, programme and cost and tackle the inappropriate resource dilemmas projects finding themselves in through clear tendering and accurate planning. In addition, before making erratic decisions, projects must assess the risk profiling of proceed without approved design details and include the client in the decision-making process. Moreover, the findings call for a greater collaborative environment between the construction team and quality management department, rather than being seen as obstructive (i.e. compliance based policing). All of these must be driven by leadership to overhaul the way quality is managed on schemes. The findings demonstrate the importance and impact from open-ended survey response data studies to enhance quantitative outcomes and help provide strengthened proposals of improvement.

This paper addresses the highly sensitive area of quality failure outcomes and interrogates them via an industry survey within a major UK contractor for feedback. Unique insights are gained into how industry professionals perceive quality in construction. From previous research, this has been largely missing and offers a valuable addition in understanding the “quality status quo” from those delivering schemes.

The purpose of this study is to dope silver (Ag) and fluorine (F) in zinc oxide (ZnO) for the enhancement of electrical and optical properties of ZnO, as previous studies reported the improvement of these properties using individual doping of F and Ag. In this paper, F and Ag co-doped ZnO nanorods were synthesized using a modified hydrothermal method.

The hydrothermal method was modified and used for the synthesis of the doped ZnO nanostructures, where stainless autoclave and oven were replaced with the Duran laboratory bottle and water boiler system in the process. The ultraviolet metal-semiconductor-metal photodetector (PD) was fabricated using DC sputtering method.

Vertically aligned nanorods images were captured from field emission scanning electron microscopy. XPS analysis confirmed greater spin-orbital interaction in the F and Ag co-doped ZnO sample and revealed the presence of F, Ag, Zn and O in the samples, indicating a successful doping process. X-ray diffraction revealed a hexagonal wurtzite structure with enhanced crystal quality upon co-doping. The bandgap decreased from 3.19 to 3.14 eV upon co-doping because of reduced defects density in the sample. Finally, an ultra-violet PD was fabricated with enhanced sensitivity and response times upon co-doping.

The low-cost, less energy-consuming Duran laboratory bottle and water boiler system were used as the substitute of expensive, more energy-consuming stainless autoclave and oven in a hydrothermal method for synthesis of F and Ag co-doped ZnO and subsequent fabrication of PD.

The purpose of this paper is to use Bourdieu’s Theory of Capital–Field–Habitus to explore how refugees, asylum seekers and migrants accumulate and mobilise social, cultural, symbolic and economic capital to find meaningful work in the Australian construction industry.

The paper reports the results of a survey of refugees, asylum seekers and migrants who have either successfully or unsuccessfully searched for employment in the Australian construction industry.

The findings dispel widely held negative stereotypes of about this group by describing a highly capable workforce which could address significant skills shortages in the industry, while concurrently diversifying the workforce. However, it is found that refugees, asylum seekers and migrants face considerable barriers to finding meaningful employment in the construction industry. In circumventing these barriers, education institutions, charities and community-based organisations play an especially important role, alongside friends and family networks. They do this by helping refugees, asylum seekers and migrants accumulate and deploy the necessary capital to secure meaningful work in the construction industry. Disappointingly, it is also found that the construction industry does little to help facilitate capital accumulation and deployment for this group, despite the urgent need to address diversity and critical skills shortages.

Employing Pierre Bourdieu’s Theory of Capital–Field–Habitus, the findings make a number of new theoretical and practical contributions to the limited body of international research relating to the employment of refugees, asylum seekers and migrant workers in the construction. The results are important because meaningful employment is widely accepted to be the single most factor in the successful integration of refugees, asylum seekers and migrants into a host society and the construction industry represents an important source of potential employment for them.

The purpose of this paper is to identify the role of informal economic relations (IER) in the day-to-day working of organizations, thereby opening a way to theorizing and informed practice. The authors will present and discuss about the manifestation of informality in “everyday” reality of Soviet and transformation economies. Informed by Cultural theory and in particular the work of Gerald Mars, the authors are taking account ontologically and methodologically of Labour process theory.

Through presentation of ethnographic data of detailed accounts and case vignettes in production and retail in the Soviet period of the late 1970s and 1980s and from the construction sector in contemporary Russia, with a focus on the labour process, the authors inform and discuss key processes in the informal working of organizations.

In the Soviet system the informal economy co-existed in symbiosis with the formal command economy, implicitly adopting a “live and let live” attitude. In addition, informal relations were essential to the working of work organizations, sustaining workers’ “negative control” and bargaining power. contemporary Russian capitalism, while embracing informal economic activities, a legacy of the Soviet period, advocates an “each to his own” approach which retains the flexibility but not the bargaining space for employees. That facilitates exploitation, particularly of the most vulnerable workers, with dire consequences for the work process.

The paper provides a platform for theorizing about the role and place of IER in organizations. Of importance to managerial practice, the paper informs on those aspects of the work routine that remain hidden from view and are often excluded from academic discourse. The social implications are profound, shedding light on central issues such as recruitment, income distribution, health and safety and deregulated forms of employment.

The paper examines economic behaviour under different economic-political regimes demonstrating continuities and changes during a fundamental social-economic reorientation of an important regional economy, through close observation at the micro and meso-level of, respectively, the workplace, organizations and industry, outlining theoretical, practical and social implications.

This research examines the employability challenges faced by skilled female migrants in the Australian construction industry, focusing on barriers to employment and their negative impacts on confidence, health and well-being. The paper concludes with recommendations for construction firms and policymakers to improve the employability of these women, offering insights that are applicable internationally.

Using employability theory, the study draws on semi-structured interviews with 16 skilled female migrants seeking employment in the Australian construction industry. The interviews captured the lived experiences of these women, and thematic analysis was applied to identify key barriers and inform recommendations for construction firms and policymakers.

The findings provide new conceptual insights into the multiple barriers which female skilled migrants have to overcome in improving their employability in the construction industry. It is also found that these experiences of seeking employment in construction align with the theoretical concept of “contextualized employability” and have potentially profound negative impacts on skilled female migrants’ confidence, hope, health, well-being and family and community relationships. This is despite the Australian construction industry facing a serious labour and skills shortage and being the most gender segregated industry in Australia. The study highlights the need for tailored support, improved industry practices and collaborative efforts from government and private sectors to enhance the employability and integration of skilled female migrants in the construction industry.

The research is limited by its focus on the Australian context, which may not be generalisable to other countries with different institutional systems, policies and cultural attitudes towards migrants. The sample size of 16 participants, while providing in-depth insights, may not capture the full diversity of experiences among female skilled migrants. Further research is needed in other countries to compare findings and develop more comprehensive strategies. Despite these limitations, the study’s implications highlight the urgent need for better support systems and industry reforms to improve the employability of skilled female migrants in the construction sector.

Improving the employability of skilled female migrants promotes social integration, mental health and stronger community ties. It challenges gender stereotypes and reduces discrimination in the construction industry, contributing to a more diverse and inclusive workforce. Practical recommendations include mentorship programs, inclusive recruitment and tailored training. Social procurement policies could set hiring targets for female migrants in the construction industry, while streamlined qualification recognition and tax incentives can encourage hiring. Non-profits and community organisations can support these efforts through mentorship, networking and internships, helping these women build sustainable careers and strengthen workforce diversity. The recommendations aim at enhancing the job prospects and overall well-being of these women while addressing labour shortages in the construction industry.

This study contributes original insights into the under-researched area of skilled female migrants’ employability in the construction industry. It expands employability theory by highlighting the impact of intersecting factors such as gender, migration status and industry-specific barriers on employment outcomes. Its practical recommendations offer pathways for policymakers and industry leaders to improve the integration and employment outcomes of this untapped talent pool.

This paper aims to discuss the concepts of Industry 4.0, Industry 5.0, the New Normal and sustainable development (SD). The simultaneous existence of two Industrial Revolutions raises questions, thus, necessitating discussions and clarifications. The issue of SD has become a compulsory prerequisite for the future survival of humanity.

An exploratory and inductive methodology was used to examine the phenomenon under analysis. Qualitative and quantitative data were gathered through a multi-step methodological process. A brief analysis using VoS viewer software enabled the authors to comprehend recent theoretical developments and analytical perspectives.

The findings underscore the relationship between the new sustainability challenges, digital transactions and organisational competitiveness. These intricate competitive challenges can be surmounted by focusing on educational offerings, particularly in universities. By forging international educational connections, the challenges posed by SD can be relatively easily overcome.

The authors conducted a comparative study of university students from four different countries: Georgia, Hungary, Italy and Ukraine. The authors observed differences in the average values across various countries, as well as disparities among respondents from the same country. Moreover, the results reveal a tendency among female respondents to be more inclined towards issues of green management and sustainability. SD cannot be realised without international collaboration. The authors present a schematic representation of the systemic connections among the universities of the participating countries to achieve SD.