Search results

Drawing upon the theory of organizational commitment and relative standing, this study aimed to develop an integrative model to examine how organizational cultural differences impact on mergers and acquisitions (M&A) performance.

The study used regression analysis and moderated path analysis to test the hypothesis with a sample of 103 executives from 49 firms acquired by Chinese state-owned enterprises.

The paper arrives at the conclusion that the executives’ organizational commitment mediated the association between organizational cultural differences and M&A performance. Besides, the authors also confirmed the moderator role of relative standing.

The paper suggests ways that can help practitioners better eliminate cultural differences obstacles during the M&A by presenting an integrative framework and showed an actual Chinese case.

This study contributes to the M&A literature by developing an integrative model to explain the complexity between organizational cultural differences and M&A performance with a Chinese executive sample.

This study aims to use a bottom-up, inductive approach to derive destination image attributes from large quantities of online consumer narratives and establish a destination classification system based on relationships among attributes and places.

Content and social network analyses were used to explore the consumer image structure for destinations based on online narratives. Cluster analysis was then used to group destinations by attributes, and ANOVA provided comparisons.

Twenty-two attributes were identified and combined into three groups (core, expected, latent). Destinations were classified into three clusters (comprehensive urban, scenic and lifestyle) based on their network centralities. Using data on Chinese tourism, the most mentioned (core) attributes were determined to be landscape, traffic within the destination, food and beverages and resource-based attractions. Social life was meaningful in consumer narratives but often overlooked by researchers.

Destinations should determine into which category they belong and then appeal to the real needs of tourists. Destination management organizations should provide the essential attributes while paying greater attention to highlighting the destinations’ social life atmosphere.

This research produced empirical work on Chinese tourism by combining a bottom-up, inductive research design with big data. It divided the 49 destinations into three categories and established a new system based on rich data to classify travel destinations.

本研究旨在使用自下而上的归纳方法从大量的在线消费者的叙述中总结出目的地形象的属性, 并根据目的地形象的属性和地点之间的关系建立一个目的地分类系统。

首先通过内容分析方法和社会网络分析方法分析在线消费者的叙述数据得出目的地的消费者形象结构, 然后采用聚类分析方法按照属性对目的地形象进行分组, 并通过方差分析进行比较。

结果显示总结出22种属性, 并将其组合为三组(核心、预期和潜在)。目的地根据其网络中心度被分为三个集群(综合城市、风景和生活方式)。最常被提及的(核心)属性是景观、目的地的交通、食品和饮料以及资源型景点。在消费者的叙述数据中表明社会生活是有意义的, 但常常被研究人员忽视。

首先本研究通过将自下而上的归纳研究设计与大数据相结合对中国旅游业进行了实证研究。其次通过将49个旅游目的地分为三类以及基于大数据建立了一个新的旅游目的地分类系统。

旅游目的地应该明确自己属于哪一类目的地类型然后迎合游客的真正需求。DMOs应该提供旅游目的地的基本属性, 注重提升旅游目的地的社会生活氛围。

Se realizó un análisis de contenido en redes sociales para explorar la estructura de la imagen de los destinos por parte de los consumidores basándose en las descripciones en línea. A continuación, se empleó el análisis de clusters para agrupar los destinos por atributos, estableciendo comparaciones mediante el análisis ANOVA.

Los propósitos de esta investigación eran utilizar un enfoque ascendente e inductivo para obtener atributos de imagen de los destinos a partir de grandes cantidades de descripciones de consumidores en línea, y establecer un sistema de clasificación de destinos basado en las relaciones entre atributos y lugares.

Se identificaron 22 atributos que luego se agruparon en tres grupos (principales, esperados, latentes). Los destinos se clasificaron en tres grupos (urbano integral, paisajístico y de estilo de vida) en función de sus centralidades de red. Utilizando datos sobre el turismo chino, se determinó que los atributos (centrales) más mencionados eran el paisaje, el tráfico dentro del destino, la comida y las bebidas, y las atracciones basadas en los recursos. La vida social era importante en los comentarios de los consumidores, pero a menudo los investigadores la pasaban por alto.

Los destinos deberían determinar a qué categoría pertenecen y luego apelar a las necesidades reales de los turistas. Los DMO deberían proporcionar los atributos esenciales prestando mayor atención a resaltar el entorno de vida social de los destinos.

Esta investigación elaboró un trabajo empírico sobre el turismo chino combinando un diseño de investigación inductiva ascendente con big data. Dividió los 49 destinos en tres categorías y estableció un nuevo sistema basado en los grandes datos para clasificar los destinos turísticos.

The role of inventors' creativity is crucial for technological innovation within enterprises. The mobility of inventors among different enterprises is a primary source for companies to acquire external knowledge. The mechanism of “learning-by-hiring” is widely recognized by companies. Therefore, it is important to determine how to allocate network resources to enhance the creativity of inventors when companies hire mobile inventors.

The study suggests an analytical framework that analyzes alterations in tie strength and structural holes resulting from the network embeddedness of mobile inventors as well as the effect of the interaction between these two variables on changes in inventor’s creativity after the mobility. In addition, this paper examines the moderating impact of cognitive richness of mobile inventors and cognitive distance between mobile inventors and new employers on the correlation between network embeddedness and creativity.

This study found that: (1) The increase of tie strength has a significant boost in creativity. (2) Increasing structural holes can significantly improve the creativity of mobile inventors. (3) When both the tie strength and the structural holes increase, the creativity of the mobile inventors significantly increases. (4) It is important to note that when there is a greater cognitive distance, stronger tie strength promotes the creativity of mobile inventors. Additionally, cognitive richness plays a significant role in moderating the relationship between changes in structural holes and the creativity of mobile inventors.

These findings provide theoretical guidance for firms to effectively manage mobile inventors and optimize collaborative networks within organizations.

This study aims to investigate the mechanism of the misinformation spread based on the elaboration likelihood model and the effects of four factors – emotion, topic, authority and richness – on the depth, breadth and structural virality of misinformation spread.

The authors collected 2,514 misinformation microblogs and 142,006 reposts from Weibo, used deep learning methods to identify the emotions and topics of misinformation and extracted the structural characteristics of the spreading network using the network analysis method.

Results show that misinformation has a smaller spread size and breadth than true news but has a similar spread depth and structural virality. The differential influence of emotions on the structural characteristics of misinformation propagation was found: sadness can promote the breadth of misinformation spread, anger can promote depth and disgust can promote depth and structural virality. In addition, the international topic, the number of followers, images and videos can significantly and positively influence the misinformation's spread size, depth, breadth and structural virality.

The influencing factors of the structural characteristics of misinformation propagation are clarified, which is helpful for the detection and management of misinformation.

This study aims to investigate the influence of inventors’ abilities to acquire external knowledge, provide broad and professional knowledge and patenting output (i.e. different types of inventors) on the formation of structural holes.

The authors collected 59,798 patents applied for and granted in the USA by 33 of the largest firms worldwide in the pharmaceutical industry between 1975 and 2014. A random-effects tobit model was used to test the hypotheses.

The inventors’ ability to acquire external knowledge contributes to the formation of structural holes. While inventors’ ability to provide broad knowledge positively affects the formation of structural holes, their ability to provide professional knowledge works otherwise. In addition, key inventors and industrious inventors are more likely to form structural holes than talents.

The results identify individual factors that affect the formation of structural holes and improve the understanding of structural hole theory. This study is unique in that most scholars have studied the consequences of structural hole formation rather than their antecedents. Studies on the origin of structural holes neglect the effect of inventors’ knowledge abilities and patenting output. By addressing this gap, this study contributes to a more comprehensive theoretical understanding of structural holes. The results can guide managers in managing structural holes in accordance with inventors’ knowledge abilities and patenting outputs, which optimize the allocation of network resources.

The purpose of this study is to reduce the residual stress in welded workpieces, optimize the vibratory stress relief treatment process through the use of a vibration generator and enhance the durability and longevity of the workpiece by developing a vibratory stress relief robot that incorporates a multi-manipulator system.

The multi-manipulator combination work is designed so that each manipulator is deployed according to the requirements of vibration stress relief work. Each manipulator works independently and coordinates with others to achieve multi-dimensional vibratory stress relief of the workpiece. A two-degree-of-freedom mobile platform is designed to enable the transverse and longitudinal movement of the manipulator, expanding the working space of the robot. A small electromagnetic superharmonic vibration generator is designed to produce directional vibrations in any orientation. This design addresses the technical challenge of traditional vibration generators being bulky and unable to achieve directional vibrations.

The residual stress relief experiment demonstrates that the residual stress of the workpiece is reduced by approximately 73% through three-degree-of-freedom vibration. The multi-dimensional vibration effectively enhances the relief effect of residual stress, which is beneficial for improving the strength and service life of the workpiece.

A new multi-manipulator robot is proposed to alleviate the residual stress generated by workpiece welding by integrating vibratory stress relief with robotics. It is beneficial to reduce material and energy consumption while enhancing the strength and service life of the workpiece.

This paper aims to design a single and double throat oil groove structure, which can reduce the drag torque of the wet clutch.

A three-dimensional simulation model was established herein using the computational fluid dynamics method. The influence of oil groove structure on the oil film flow field and the drag torque is obtained by a simulation.

Compared with the traditional radial oil groove, the results show that the single throat oil groove structure reduces the drag torque by about 24.59%; the double throat oil groove reduces the drag torque by about 47.27%. As the speed difference increases, the average temperature rise of the oil film of the double throat oil groove is 4°C lower than that of the single throat oil groove, indicating that it has good heat dissipation performance. The analysis results were verified by experimental results.

In this paper, the radial oil groove is taken as the reference object, and the structure of the oil groove is designed and improved. The simulation analysis and experiment verify the rule of the influence of the oil groove structure on the drag torque, which provides a new design idea for reducing the drag torque of wet clutch.

This study aims to monitor and guide the assembly process. The operators need to change the assembly process according to the products’ specifications during manual assembly of mass customized production. Traditional information inquiry and display methods, such as manual lookup of assembly drawings or electronic manuals, are inefficient and error-prone.

This paper proposes a projection-based augmented reality system (PBARS) for assembly guidance and monitoring. The system includes a projection method based on viewpoint tracking, in which the position of the operator’s head is tracked and the projection images are changed correspondingly. The assembly monitoring phase applies a method for parts recognition. First, the pixel local binary pattern (PX-LBP) operator is achieved by merging the classical LBP operator with the pixel classification process. Afterward, the PX-LBP features of the depth images are extracted and the randomized decision forests classifier is used to get the pixel classification prediction image (PCPI). Parts recognition and assembly monitoring is performed by PCPI analysis.

The projection image changes with the viewpoint of the human body, hence the operators always perceive the three-dimensional guiding scene from different viewpoints, improving the human-computer interaction. Part recognition and assembly monitoring were achieved by comparing the PCPIs, in which missing and erroneous assembly can be detected online.

This paper designed the PBARS to monitor and guide the assembly process simultaneously, with potential applications in mass customized production. The parts recognition and assembly monitoring based on pixels classification provides a novel method for assembly monitoring.

Oil-free heat pumps that use the system refrigerant gases as lubricants are preferred for thermal management in future space applications. This study aims to numerically and experimentally investigate the static performance of externally pressurized thrust bearings lubricated with refrigerant gases.

The refrigerant gases R22, R410A and CO₂ were chosen as the research objects, while N₂ was used for comparison. Computational fluid dynamics was used to solve the full 3 D Navier–Stokes equations to determine the load capacity, static stiffness and static pressure distribution in the bearing film. The numerical results were experimentally verified.

The results showed that the refrigerant-gas-lubricated thrust bearings had a lower load capacity than the N2-lubricated bearings, but they presented a higher static stiffness when the bearing clearance was less than 9 µm. Compared with the N2-lubricated bearings, the optimal static stiffness of the R22- and CO2-lubricated bearings increased by more than 46% and more than 21%, respectively. The numerical and experimental results indicate that a small bearing clearance would be preferable when designing externally pressurized gas thrust bearings lubricated with the working medium of heat pump systems for space applications.

The findings of this study can serve as a basis for the further investigation of refrigerant gases as lubricants in heat pump systems, as well as for the future design of such gas bearings in heat pump systems for space applications.

As the crucial support component of the propeller power system, the reliability of the operation of submersible pumps is influenced by the lubrication performance of water-lubricated thrust bearings. When the water-lubricated thrust bearings are under start-stop or heavy load conditions, the effect of surface morphology is crucial as the mixed lubrication regime is encountered. This paper aims to develop one mixed lubrication model for the water-lubricated thrust bearings to predict the effects of surface skewness, kurtosis and roughness orientation on the loading carrying capacity and tribological behavior.

This paper developed one improved mixed lubrication model specifically for the water-lubricated thrust bearing system. In this model, the hydrodynamic model was improved by using the height of the rough surface and its probability density function, combined with the average flow model. The asperity contact model was improved by using the equation for the Pearson system of frequency curves to characterize the non-Gaussian aspect of surface roughness distribution.

According to the results, negative skewness, large kurtosis and lateral surface pattern can improve the tribological performance of water-lubricated thrust bearings. Optimizing the surface morphology is a reasonable design method that can improve the performance of water-lubricated thrust bearings.

In this paper, one mixed lubrication model specifically for the water-lubricated thrust bearing with the effect of surface roughness into consideration was developed. Based on the developed model, the effect of surface morphology on tribological behavior can be evaluated.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-08-2023-0247/