Rouhollah Moosavi, Mehdi Banihashemi and Cheng-Xian Lin
This paper aims to numerically investigate the thermal performance evaluation of a microchannel with different porous media insert configurations.
Abstract
Purpose
This paper aims to numerically investigate the thermal performance evaluation of a microchannel with different porous media insert configurations.
Design/methodology/approach
Heat transfer and pressure drop of fluid flow through a three-dimensional (3D) microchannel with different partially and filled porous media insert configurations are investigated numerically. The number of divisions and positions of porous material inside the microchannel for 12 different arrangements are considered. A control volume method is used for single-phase laminar flow with the Darcy–Forchheimer model used for the porous media. The geometry of the problem consists of a microchannel with a rectangular cross-section of 0.4 mm × 0.2 mm and length 20 mm, with a stainless steel porous material insert with a porosity coefficient of ε = 0.32 and a Darcy number of Da = 2.7 × 10−4.
Findings
Numerical results show that when the transverse arrangement is used, as the number of partitions increases, the thermal performance is improved and the heat transfer increases up to 300% compared to that of the plain microchannel. Comparing the obtained results from the microchannels with transverse and longitudinal configurations, at low Reynolds numbers, the transverse arrangement of porous blocks and at high Reynold numbers, the longitudinal arrangement present the best thermal performance which is virtually four times higher compared to the obtained Nu numbers from the plain microchannel. The results show that as the volume of porous material is constant in the cases with various transverse porous blocks, the pressure drop is not changed in these cases. Also, the highest thermal performance ratio is when the porous material is placed along the walls in a longitudinal direction.
Originality/value
To the best knowledge of the authors, in the previous research, the effect of the arrangement and location of the porous medium in the transverse and longitudinal direction in the microchannel and their effect in different states on the behavior of flow and heat transfer has not been numerically investigated. In this study, the porous media configuration and its placement in a 3D microchannel were numerically studied. The effect of porous material layout and configurations in different longitudinal and transverse directions on the pressure drop, heat transfer and thermal performance in the 3D microchannel is investigated numerically.
Details
Keywords
Cheng-Xian Yang and Lauri M. Baker
This study aimed to investigate whether information from reliable news sources such as medical experts and government officials, along with governmental and individual risk…
Abstract
Purpose
This study aimed to investigate whether information from reliable news sources such as medical experts and government officials, along with governmental and individual risk responses, influences consumers’ perceptions of news and intention to seek more information. Additionally, it aimed to explore the relationships between these perceptions and consumers’ intentions to seek information in a food safety risk event.
Design/methodology/approach
A survey design methodology was employed. A quasi-experimental approach divided 470 Taiwanese participants into three groups, each exposed to varying online news content about food safety news, designed according to the Internalization-Distribution-Explanation-Action (IDEA) model. This involved different combinations of reliable sources and risk response advice to examine the impact on news comprehension and behaviour intentions.
Findings
The results indicated that consumers perceived the news as highly credible when they read it with reliable news sources or risk response advice. Governmental and individual risk response advice significantly impacted consumers’ understanding of news. In addition, perceptions of news credibility and understanding of news can increase individuals’ information-seeking intentions to protect themselves from food safety risks.
Originality/value
This study introduced novel insights into the application of the source credibility theory (SCT) model within Taiwanese food safety incidents, identifying key factors that motivate consumer information-seeking behaviour. It marks an initial attempt to incorporate the IDEA model-based risk communication content into research design, aligning with existing literature while highlighting the critical role of reliable sources in enhancing news credibility and consumer response.
Details
Keywords
The purpose of this paper is to provide the historical background of genealogical records and analyze the value of Chinese genealogical research through the study of names and…
Abstract
Purpose
The purpose of this paper is to provide the historical background of genealogical records and analyze the value of Chinese genealogical research through the study of names and genealogical resources.
Design/methodology/approach
The paper examines the historical evolution and value of Chinese genealogical records, with the focus on researching the Islamic Chinese names used by the people living in Guilin. The highlight of this paper includes the analysis and evolution of the Islamic Chinese names commonly adopted by the local people in Guilin. It concludes with the recommendations on emphasizing and making the best use of genealogical records to enhance the research value of Chinese overseas studies.
Findings
The paper covers the history of Islam and describes how the religion was introduced into China, as well as Muslims' ethnicity and identity. It also places focus on the importance of building a research collection in Asian history and Chinese genealogy.
Research limitations/implications
This research study has a strong subject focus on Chinese genealogy, Asian history, and Islamic Chinese surnames. It is a narrow field that few researchers have delved into.
Practical implications
The results of this study will assist students, researchers, and the general public in tracing the origin of their surnames and developing their interest in the social and historical value of Chinese local history and genealogies.
Social implications
The study of Chinese surnames is, by itself, a particular field for researching the social and political implications of contemporary Chinese society during the time the family members lived.
Originality/value
Very little research has been done in the area of Chinese local history and genealogy. The paper would be of value to researchers such as historians, sociologists, ethnologists and archaeologists, as well as students and anyone interested in researching a surname origin, its history and evolution.
Details
Keywords
Hui Zhao, Xian Cheng, Jing Gao and Guikun Yu
Building a smart city is a necessary path to achieve sustainable urban development. Smart city public–private partnership (PPP) project is a necessary measure to build a smart…
Abstract
Purpose
Building a smart city is a necessary path to achieve sustainable urban development. Smart city public–private partnership (PPP) project is a necessary measure to build a smart city. Since there are many participants in smart city PPP projects, there are problems such as uneven distribution of risks; therefore, in order to ensure the normal construction and operation of the project, the reasonable sharing of risks among the participants becomes an urgent problem to be solved. In order to make each participant clearly understand the risk sharing of smart city PPP projects, this paper aims to establish a scientific and practical risk sharing model.
Design/methodology/approach
This paper uses the literature review method and the Delphi method to construct a risk index system for smart city PPP projects and then calculates the objective and subjective weights of each risk index through the Entropy Weight (EW) and G1 methods, respectively, and uses the combined assignment method to find the comprehensive weights. Considering the nature of the risk sharing problem, this paper constructs a risk sharing model for smart city PPP projects by initially sharing the risks of smart city PPP projects through Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) to determine the independently borne risks and the jointly borne risks and then determines the sharing ratio of the jointly borne risks based on utility theory.
Findings
Finally, this paper verifies the applicability and feasibility of the risk-sharing model through empirical analysis, using the smart city of Suzhou Industrial Park as a research case. It is hoped that this study can provide a useful reference for the risk sharing of PPP projects in smart cities.
Originality/value
In this paper, the authors calculate the portfolio assignment by EW-G1 and construct a risk-sharing model by TOPSIS-Utility Theory (UT), which is applied for the first time in the study of risk sharing in smart cities.