Search results

The purpose of this study is to present a novel extended hybrid analytical method (HAM) that leverages a two-dimensional (2-D) coupling between the semi-analytical Maxwell–Fourier analysis and the finite element method (FEM) in Cartesian coordinates.

The proposed model is applied to flat permanent-magnet linear electrical machines with rotor-dual. The magnetic field solution across the entire machine is established by coupling an exact analytical model (AM), designed for regions with relative magnetic permeability equal to unity, with a FEM in ferromagnetic regions. The coupling between AM and FEM occurs bidirectionally (x, y) along the edges separating teeth regions and their adjacent regions through applied boundary conditions.

The developed HAM yields accurate results concerning the magnetic flux density distribution, cogging force and induced voltage under various operating conditions, including magnetic or geometric parameters. A comparison with hybrid finite-difference and hybrid reluctance network methods demonstrates very satisfactory agreement with 2-D FEM.

The original contribution of this paper lies in establishing a direct coupling between the semi-analytical Maxwell–Fourier analysis and the FEM, particularly at the interface between adjacent regions with differing magnetic parameters.

This paper aims to propose an improved two-dimensional hybrid analytical method (HAM) in Cartesian coordinates, based on the exact subdomain technique and the magnetic equivalent circuit (MEC).

The magnetic field solution is obtained by coupling an exact analytical model (AM), calculated in all regions having relative permeability equal to unity, with a MEC, using a nodal-mesh formulation (i.e. Kirchhoff’s current law) in ferromagnetic regions. The AM and MEC are connected in both axes (x, y) of the (non-)periodicity direction (i.e. in the interface between the tooth regions and all its adjacent regions as slots and/or air-gap). To provide accuracy solutions, the current density distribution in slot regions is modeled by using Maxwell’s equations instead of the MEC characterized by an equivalent magnetomotive force (MMF) located in slots, teeth and yokes.

It is found that whatever the iron core relative permeability, the developed HAM gives accurate results for no- and on-load conditions. The finite-element analysis demonstrates excellent results of the developed technique.

The main objective of this paper is to make a direct coupling between the AM and MEC in both directions (i.e. x- and y-edges). The current density distribution is modeled by using Maxwell’s equations instead of the MEC and characterized by an MMF.

The purpose of this study is the introduction of finite permeability of ferromagnetic core in analytical approach for slotted spoke-type permanent magnet machine.

A two-dimensional analytical approach of magnetic field distribution is established for spoke-type permanent magnet machine to calculate the flux density distribution in the middle of airgap. The paper presents an analytical subdomain model accounting for stator slotting effect. The governing equations are obtained from Maxwell’s equations by using vector potential in all regions of the machine, i.e. magnet, airgap, stator slots and rotor/stator yoke. The finite element analysis is used to validate the analytical results.

It is found that the developed subdomain model including finite permeability of ferromagnetic core is accurate and is applicable for spoke-type permanent magnet machine for no-load and on-load condition. The analytical results are in accurate agreement with the numerical simulation.

Some assumptions and conditions are presented to improve and simplify the analytical method for analyzing the global saturation for spoke-type permanent magnet machine.

The purpose of this paper is to propose a two-dimensional (2-D) hybrid analytical model (HAM) in polar coordinates, combining a 2-D exact subdomain (SD) technique and magnetic equivalent circuit (MEC), for the magnetic field calculation in electrical machines at no-load and on-load conditions.

In this paper, the proposed technique is applied to dual-rotor permanent magnet (PM) synchronous machines. The magnetic field is computed by coupling an exact analytical model (AM), based on the formal resolution of Maxwell’s equations applied in subdomains, in regions at unitary relative permeability with a MEC, using a nodal-mesh formulation (i.e. Kirchhoff's current law), in ferromagnetic regions. The AM and MEC are connected in both directions (i.e. r- and theta-edges) of the (non-)periodicity direction (i.e. in the interface between teeth regions and all its adjacent regions as slots and/or air-gap). To provide accurate solutions, the current density distribution in slot regions is modeled by using Maxwell’s equations instead to MEC and characterized by an equivalent magnetomotive force (MMF) located in the slots, teeth and yoke.

It is found that whatever the iron core relative permeability, the developed HAM gives accurate results for both no-load and on-load conditions. Finite element analysis demonstrates the excellent results of the developed technique.

The main objective of this paper is to achieve a direct coupling between the AM and MEC in both directions (i.e. r- and theta-edges). The current density distribution is modeled by using Maxwell’s equations instead to MEC and characterized by an MMF.

This paper aims to propose a semianalytical model of a squirrel-cage induction machine (SCIM), considering local magnetic saturation and eddy-currents induced in the rotor bars.

The regions of the rotor and stator are divided into elementary subdomains (E-SDs) characterized by general solutions at the first harmonic of the magneto-harmonic Maxwell’s equations. These E-SDs are connected in both directions (i.e., along the r- and θ-edges).

The calculation of the magnetic field has been validated for various values of slip and iron permeability. All electromagnetic quantities were compared with those obtained using a two-dimensional finite-element method. The semianalytical results are satisfactory compared with the numerical results, considering both the amplitude and waveform.

Expansion of the recent analytical model (E-SD technique) for the full prediction of the magnetic field in SCIMs, considering the local saturation effect and the eddy-currents induced in the rotor bars.

This paper aims to the improvement of permanent magnet shape in the popular permanent magnet synchronous machine (PMSM) is proposed in this paper in view to mitigate cogging torque magnitude and torque ripple.

A two-dimensional exact analytical approach of magnetic field distribution is established for the PMSM considering magnet shape and slot opening. The optimal magnet shape is constituted of small number of layers stacked radially. The thickness of each magnet layer is considered equal to about one mm or more; however, a parametric study was performed to determine pole pitch ratio value. The finite element method is used to validate the analytical results.

Cogging torque peaks and torque ripples can be mitigated significantly more than 90 per cent compared to results issued from machine having classical magnet shape. Raising the number of magnet layers can give better results. The results of this paper are compared also with those issued from the machine having sinusoidal magnet shape and give a good solution.

A new technique for cogging torque and torque ripple mitigation is proposed in this paper by changing permanent magnet shape. The proposed final magnet shape is constituted of a set of stacked and well-dimensioned layers relative to the opening angle.