Search results

The purpose of this study is to produce a numerical model capable of predicting the mixed convection flows in a rectangular cavity filled with a porous medium and to analyze the effects of several parameters on convective flow in porous media in a differentially heated enclosure.

The authors used the finite volume method.

The authors predicted and analyzed the effects of Richardson number, Darcy number, porosity values and Prandtl number in heat transfer and fluid flow. On other hand, the porosity and Richardson number values lead to reducing the heat transfer rate of mixed convection flow in a porous medium.

A comparison between Darcy–Brinkman–Forchheimer model and Darcy–Brinkman model is discussed and analyzed. The authors finally conclude that the Darcy–Brinkman model overestimates the heat transfer rate.

The purpose of this study is to investigate the effects of heat generation or absorption on heat transfer and fluid flow within two- and three-dimensional enclosure for homogeneous medium filled with different metal liquid. Numerical results are presented and analyzed in terms of fluid flow, thermal field structures, as well as average Nusselt number profiles over a wide range of dimensionless quantities, Grashof number (Gr) (104 and 105), SQ (varied between −500 to 500) and Prandtl number (Pr = 0.015, 0.024 and 0.0321). The results indicate that when the conductive regime is established for a Grashof number Gr = 104, the 2D model is valid and predicts all three-dimensional results with negligible difference. This was not the case in the convective regime (Gr = 105) where the effect of the third direction becomes important, where a 2D-3D difference was seen with about 37 per cent. Also, in most cases, the authors find that the heat absorption phenomena have the opposite effect with respect to the heat generation.

Numerical results are presented and analyzed in terms of fluid flow, thermal field structures, as well as average Nusselt number profiles over a wide range of dimensionless quantities.

Grashof number (Gr) (104 and 105), SQ (varied between −500 to 500) and Prandtl number (Pr = 0.015, 0.024 and 0.0321).

The results indicate that when the conductive regime is established for a Grashof number Gr = 104, the 2D model is valid and predicts all three-dimensional results with negligible difference.

The purpose of this paper is to examine numerically the three natural convection of air induced by temperature difference between a cold outer cubic enclosure and a hot inner cylinder. Simulations have been carried out for Rayleigh numbers ranging from 103 to 107 and titled angle of the enclosure from 0° to 90°. The developed mathematical model is governed by the coupled equations of continuity, momentum and energy, and is solved by finite volume method. The effects of cylinder inclination and Rayleigh number on fluid flow and heat transfer are presented. The distribution of isocontours of temperature and isosurfaces of velocity eventually reaches a steady state in the range of Rayleigh numbers between 103 and 107 for titled inclination of 90°; however, for the remaining inclinations, Rayleigh number must be in the range 103-106 to avoid unsteady state, which is manifested by the division of the area containing the maximum local heat transfer rate into three parts for a Rayleigh number equal to 107 and an inclination of 90°. We mention that instability study is not included in the present paper, which is solely devoted to three-dimensional calculations. Results also indicate that optimal average heat transfer rate is obtained for both high Rayleigh number of 106 and high inclination of 90° for the two cases of the inner cylinder and cubical enclosure.

The manuscript deals with prediction of the three-dimensional natural convection phenomena in a cubical cavity induced by an isothermal cylinder at the center with different inclinations by simulating the flow using highly numerical methods such as finite volume method.

It is found that the local Nusselt number through active walls for titled inclination set at 90°, the symmetry of the flow is conserved and the area containing the maximum heat transfer is divided into three smaller areas situated near the upper portion of the wall, taking the maximum value. That may be due to the preparation of local occurrence of instabilities and bifurcation phenomena that appear for Ra > 107, which is not included in the present paper to save journal space. It was found also that an optimal heat transfer appears when the cylinder orientation becomes vertical (a = 90°). For this inclination, buoyancy forces act upward, corresponding to an aiding situation. In addition, heat transfer rate is increasing with Rayleigh numbers, so correlations of average Nusselt through the cubical cavity and the cylinder are established as function of two parameters (Ra, a). Comparisons of the numerical results with those obtained from all correlations show good agreements.

To the author’s knowledge, studies have thus far adressed three-dimensional cuboids enclosures induced by an inner shape which the location is changed. However, no study has examined three-dimensional natural convection between the inner isothermal cylinder and outer cooled cubical enclosure when the outer enclosure is tilted.

This study aims to analyze entropy generation and magnetohydrodynamic (MHD) natural convection of hybrid nanofluid in a square cavity, with a heated elliptical block placed at the center, in presence of a periodic-variable magnetic field.

In this paper, simulations were performed with a FORTRAN home code. The numerical methodology used to solve Navier–Stokes, energy and entropy generation equations with corresponding boundary conditions, is essentially based on the finite volume method and full multigrid acceleration.

The cavity is filled with Ag–Tio₂/Water hybrid nanofluid. The main objective of this investigation is to predict the effects of body’s size (6 cases), type of applied magnetic field (variable or uniform), the non-dimensional period number of the variable magnetic field (VMF) (0.2 ≤ Λ ≤ 0.8), the inclination angle of the VMF (0 ≤ χ ≤ 90), Rayleigh number (5 × 103 ≤ Ra ≥ 105) and Hartmann number (5 ≤ Ha ≥ 100) on thermal performance, heat transfer rate, entropy generation and flow patterns.

To the authors’ best knowledge, this paper is the first numerical investigation deals with the entropy generation and natural convection of hybrid nanofluid in a two-dimensional cavity, with specific thermal boundary conditions, containing an elliptical block under periodic-variable magnetic field. Different combinations between flow-governing parameters were made to find optimal thermal performance.

This paper aims to analyze the effect of aspect ratio A and aspect velocity ratio a on the bifurcation occurrence phenomena in lid-driven cavity by using finite volume method (FVM) and multigrid acceleration. This study has been performed for certain pertinent parameters; a wide range of the Reynolds number values has been adopted, and aspect ratios ranging from 0.25 to 1 and various velocity ratios from 0.25 to 0.825 have been considered in this investigation. Results show that the transition to the unsteady regime follows the classical scheme of Hopf bifurcation, giving rise to a perfectly periodic state. Flow periodicity has been verified through time history plots for the velocity component and phase-space trajectories as a function of Reynolds number. Velocity profile for special case of a square cavity (A = 1) was found to be in good agreement between current numerical results and published ones. Flow characteristics inside the cavity have been presented and discussed in terms of streamlines and vorticity contours at a fixed Reynolds number (Re = 5,000) for various aspect ratios (a = 0).

The numerical method is based on the FVM and multigrid acceleration.

Computations have been investigated for several Reynolds numbers and aspect ratios A (0.25, 0.5, 0.75, 0.825 and 1). Besides, various velocity ratios (a = 0.25, 0.5, 0.75 and 0.825) at fixed aspect ratios (A = 0.25, 0.5 and 0.75) were considered. It is observed that the transition to the unsteady regime follows the classical scheme of Hopf bifurcation, giving rise to a perfectly periodic state. Flow periodicity is verified through time history plots for velocity components and phase-space trajectories.

The bifurcations between steady and unsteady states are investigated.

Two-dimensional incompressible fluid flows around a rectangular shape placed over a larger rectangular shape at low Reynolds numbers (Re) have been numerically analyzed in the present work. The vortex shedding is investigated at different arrangements of the two shapes allowing the investigation of three possible configurations. The calculations are carried out for several values of Re ranging from 1 to 200. The effect of the obstacle geometry on the vortex shedding is analyzed for crawling, steady and unsteady regimes. The analysis of the flow evolution shows that with increasing Re beyond a certain critical value, the flow becomes unstable and undergoes a bifurcation. This paper aims to observe that the transition of the unsteady regime is performed by a Hopf bifurcation. The critical Re beyond which the flow becomes unsteady is determined for each configuration. A special attention is paid to compute the drag and lift forces acting on the rectangular shapes, which allowed determining; the best configuration in terms of both drag and lift. The unsteady periodic wake is characterized by the Strouhal number, which varies with the Re and the obstacle geometry. Hence, the values of vortex shedding frequencies are calculated in this work.

The dimensionless Navier–Stokes equations were numerically solved using the following numerical technique based on the finite volume method. The temporal discretization of the time derivative is performed by an Euler backward second-order implicit scheme. Non-linear terms are evaluated explicitly; while, viscous terms are treated implicitly. The strong velocity–pressure coupling present in the continuity and the momentum equations are handled by implementing the projection method.

The present paper aims to numerically study the effect of the obstacle geometry on the vortex shedding and on the drag and lift forces to analyze the flow structure around three configurations at crawling, steady and unsteady regimes.

A special attention is paid to compute the drag and lift forces acting on the rectangular shapes, which allowed determining; the best shapes configuration in terms of both drag and lift.

This paper aims to study the impact of convexity and concavity of the vertical borders on double-diffusive mixed convection. In addition, the study of entropy generation is performed. This numerical study has been carried out for different patterns of wavy edges to reveal their effects on heat and mass transfer phenomena.

Four different flow features are treated by varying the directions of convexity and concavity of the vertical walls. A uniform temperature, as well as concentration distributions, are introduced to the left border while keeping a cold temperature and low concentration for the right border. The horizontal boundaries are in adiabatic condition. The upper border of the chamber is moving in the right direction with an equal speed. The governing Navies–Stokes equations are designed to describe energy and species transport phenomena, and these equations are solved by compact scheme.

The investigated results are analyzed for various parameters, namely, Prandtl number, Richardson number, thermal Grashof number, Lewis number, Buoyancy ratio and amplitude of the wavy walls. It is observed that the thermal and solutal transfer performance becomes effective with lower Richardson numbers. The results reveal that the concavity and convexity of the side borders of the cabinet can control the thermosolutal performance. It is also observed that among all wavy chambers, Case-4 records maximum thermosolutal transfer rate, while Case-3 attains minimum thermosolutal transfer rate.

This work is an example of solar thermal power conversion, power collection systems, systems of energy deficiency, etc.

This study comprehensively examines entropy generation and thermosolutal performance of a ternary hybrid nanofluid in a partially active porous cabinet. The purpose of this study is to comprehend the intricate phenomena of double diffusion by investigating the dispersion behavior of Al₂O₃, CuO, and Ag nanoparticles in water.

The cabinet design consists of two horizontal walls and two curved walls with the lower border divided into a heated and concentrated region of length b and the remaining sections are adiabatic. The vertical borders are cold and low concentration, while the upper border is adiabatic. Two cavity configurations such as convex and concave are considered. A uniform porous medium is taken within the ternary hybrid nanofluid. This has been characterized by the Brinkman-extended Darcy model. Thermosolutal phenomena are governed by the Navier-Stokes equations and are solved by adopting a higher-order compact scheme.

The present study focuses on exploring the influence of several well-defined parameters, including Rayleigh number, Darcy number, Lewis number, Buoyancy ratio number, nanoparticle volume concentration and heater size. The results indicate that the ternary hybrid nanofluid outperforms both the mono and hybrid nanofluids in all considered aspects.

This study brings forth a significant contribution by uncovering novel flow features that have previously remained unexplored. By addressing a well-defined problem, the work provides valuable insights into the enhancement of thermal transport, with direct implications for diverse engineering devices such as solar collectors, heat exchangers and microelectronics.

The purpose of this paper is to carry out a comprehensive review of some latest studies devoted to natural convection phenomenon in the enclosures because of its significant industrial applications.

Geometries of the enclosures have considerable influences on the heat transfer which will be important in energy consumption. The most useful geometries in engineering fields are treated in this literature, and their effects on the fluid flow and heat transfer are presented.

A great variety of geometries included with different physical and thermal boundary conditions, heat sources and fluid/nanofluid media are analyzed. Moreover, the results of different types of methods including experimental, analytical and numerical are obtained. Different natures of natural convection phenomenon including laminar, steady-state and transient, turbulent are covered. Overall, the present review enhances the insight of researchers into choosing the best geometry for thermal process.

A comprehensive review on the most practical geometries in the industrial application is performed.