Search results

1 – 10 of 83
Per page
102050
Citations:
Loading...
Access Restricted. View access options
Article
Publication date: 21 December 2017

Bing Bing Tu and Dong Zhao

The study of the character of structural hysteretic energy under earthquake is an essential foundation for energy-based seismic design and evaluation method. The purpose of this…

80

Abstract

Purpose

The study of the character of structural hysteretic energy under earthquake is an essential foundation for energy-based seismic design and evaluation method. The purpose of this paper is to explore the distribution law of the accumulative irrecoverable hysteretic energy for MDOF structures, a formula of the accumulated irrecoverable hysteretic energy ratio along the layers is derived.

Design/methodology/approach

The procedure is based on the energy balance principle and the concept of the equivalent single-degree-of-freedom system. Furthermore, sensitivity analysis is carried out for 16 working conditions, considering all these possibilities of local failure or damage. And then the sensitivity influencing rule is obtained and the proposed formula is simplified.

Findings

Finally, the validation of the proposed formula is investigated through comparisons with the nonlinear time-history analysis results.

Originality/value

The proposed formula can be effectively to estimate the distribution of the hysteretic energy under a given ground motion.

Details

Multidiscipline Modeling in Materials and Structures, vol. 14 no. 2
Type: Research Article
ISSN: 1573-6105

Keywords

Access Restricted. View access options
Article
Publication date: 8 October 2019

Bing Bing Tu

A large number of earthquake damages showed that infill walls have obvious influence on the seismic damage performance of RC frame structures. The purpose of this paper is to…

81

Abstract

Purpose

A large number of earthquake damages showed that infill walls have obvious influence on the seismic damage performance of RC frame structures. The purpose of this paper is to study the effect of infill walls on the cumulative plastic deformation energy of RC frame structures, for which four RC frame structures are build and the time-history response analysis under unidirectional seismic action is presented.

Design/methodology/approach

The time-history response analysis under unidirectional seismic action is presented. Then the effect of periodic reduction coefficient on the cumulative plastic deformation energy of the structures, the beams and the columns is investigated.

Findings

Finally, the quantitative calculation formulas are provided. The results show that the periodic reduction coefficient has an obvious effect on the distribution of the accumulated plastic deformation energy, and the influence rules are presented here.

Originality/value

The effect of infill walls on the cumulative plastic deformation energy of RC frame structures is quantitatively analyzed here.

Details

Multidiscipline Modeling in Materials and Structures, vol. 16 no. 2
Type: Research Article
ISSN: 1573-6105

Keywords

Access Restricted. View access options
Article
Publication date: 5 June 2023

Wei Lin, Xuewen Li, Bing Tu, Chaohua Zhang and Yulong Li

This study aims to analyze the wettability of the self-developed Sn–Bi–Zn solder and to conduct a series of analysis on the wetting kinetics, diffusion phenomenon and interfacial…

162

Abstract

Purpose

This study aims to analyze the wettability of the self-developed Sn–Bi–Zn solder and to conduct a series of analysis on the wetting kinetics, diffusion phenomenon and interfacial reaction of Sn–Bi–Zn solder on Cu substrate.

Design/methodology/approach

The wetting kinetics, diffusion phenomenon and interfacial reaction of Sn–Bi–Zn solder on Cu substrate were analyzed by experiments. The interface was observed by scanning electron microscope to study the effect of Zn content on its interface.

Findings

With the increase in brazing temperature, the final spreading equivalent radius of the solder increases significantly, and the final contact angle of the solder decreases significantly. In addition, when the Zn content is 1%, the spreading effect of solder is the best, the equivalent radius is the largest and the contact angle is the smallest. According to the microstructural analysis, the thick intermetallic compounds layer of the Sn–15Bi–xZn solders on the Cu substrate can be effectively decreased by adding appropriate Zn content.

Originality/value

The wetting kinetics, diffusion phenomenon and interfacial reaction of Sn–15Bi–xZn solder on Cu substrate at different temperatures have not been studied yet.

Details

Soldering & Surface Mount Technology, vol. 35 no. 4
Type: Research Article
ISSN: 0954-0911

Keywords

Access Restricted. View access options
Article
Publication date: 5 June 2024

Liuyong Wang, Qi Wu, Ziming Song, Yue Li, Xuewen Li, Bing Tu and Yulong Li

This study aims to investigate the wetting behavior of AgCuTi and AgCu filler metals on selective laser melting (SLMed) Ti/TiB2, and to analyze the microstructure and fracture…

75

Abstract

Purpose

This study aims to investigate the wetting behavior of AgCuTi and AgCu filler metals on selective laser melting (SLMed) Ti/TiB2, and to analyze the microstructure and fracture characteristics of SLMed Ti/TiB2/AgCuTi or AgCu alloy/SLMed Ti/TiB2 brazed joints. The wetting behavior of AgCuTi and AgCu filler metals on the selective laser melted (SLMed) Ti/TiB2 has been studied. The analysis of microstructures and fracture characteristics in vacuum-brazed SLMed Ti/TiB2 substrate, using AgCuTi and AgCu filler metals, has been conducted to elucidate the influence of brazing temperature and alloy composition on the shear strength of the brazed joints.

Design/methodology/approach

Brazing SLMed-Ti/TiB2 in a vacuum using AgCuTi and AgCu filler metals, this study aims to explore the optimal parameters for brazed joints at various brazing temperatures (800°C−950°C).

Findings

The findings suggest that elevated brazing temperatures lead to a more extensive diffusion region in the joint as a result of the partial melting of the filler metal. The joint composition changes from distinct Ti2Cu layer/TiCu layer/filler metal to a-Ti (ss) + ß-Ti (ss)/TiCu. As the brazing temperature increases, the fracture mode shifts from brittle cleavage to ductile fracture, mainly attributed to a decrease in the CuTi within the brazed joint. This change in fracture behavior indicates an improvement in the ductility and toughness of the joint.

Originality/value

The originality of this study lies in the comprehensive analysis of the microstructure and shear strength of vacuum brazing SLMed Ti/TiB2 using AgCuTi and AgCu filler metals.

Details

Soldering & Surface Mount Technology, vol. 36 no. 4
Type: Research Article
ISSN: 0954-0911

Keywords

Access Restricted. View access options
Article
Publication date: 1 June 1999

George K. Chacko

Gives an in depth view of the strategies pursued by the world’s leading chief executive officers in an attempt to provide guidance to new chief executives of today. Considers the…

10002

Abstract

Gives an in depth view of the strategies pursued by the world’s leading chief executive officers in an attempt to provide guidance to new chief executives of today. Considers the marketing strategies employed, together with the organizational structures used and looks at the universal concepts that can be applied to any product. Uses anecdotal evidence to formulate a number of theories which can be used to compare your company with the best in the world. Presents initial survival strategies and then looks at ways companies can broaden their boundaries through manipulation and choice. Covers a huge variety of case studies and examples together with a substantial question and answer section.

Details

Asia Pacific Journal of Marketing and Logistics, vol. 11 no. 2/3
Type: Research Article
ISSN: 1355-5855

Keywords

Access Restricted. View access options
Article
Publication date: 4 June 2019

Árni Halldórsson, Ceren Altuntas Vural and Jessica Wehner

The purpose of this paper is to explore the sustainability of waste supply chains regarding the energy efficiency of first-mile waste collection systems and quality of waste…

1368

Abstract

Purpose

The purpose of this paper is to explore the sustainability of waste supply chains regarding the energy efficiency of first-mile waste collection systems and quality of waste. Roles of actors in the waste service triad are considered, particularly focusing on households.

Design/methodology/approach

Primary data are collected from respondents including municipality officers, waste service providers (WSPs) and households through brainstorming sessions, semi-structured interviews, site visits and a focus group. Secondary data are collected from official reports for validation.

Findings

Findings reveal tension between the energy efficiency of waste collection logistics and the quality of waste collected. Households are co-producers of logistic services providing important inputs in the form of sorting and moving waste and raw materials into new cycles of goods circulating in logistics systems. Other actors in the logistics service triad are the municipality as regulator and the WSP acting as a reverse-logistics service provider.

Practical implications

This study provides principles for policymakers and practitioners to evaluate the energy efficiency of waste management options, considering the quality of waste. Also, “logistics services” and “quality of waste” as concepts might provoke new thoughts on how to involve the consumer in resource recovery.

Originality/value

Few studies have focused on the end-consumer’s role in waste supply chains. By considering waste as a resource and the consumer as the supplier of this input, this study provides a new way to think about logistics services for waste collection.

Details

International Journal of Physical Distribution & Logistics Management, vol. 49 no. 4
Type: Research Article
ISSN: 0960-0035

Keywords

Access Restricted. View access options
Article
Publication date: 1 December 2011

Jia Beisi and Jiang Yingying

Although an important facet of modernist architecture in which function plays a prominent role, building flexibility is not entirely a new concept. Its relevance transcends…

65

Abstract

Although an important facet of modernist architecture in which function plays a prominent role, building flexibility is not entirely a new concept. Its relevance transcends generations, allowing space and structure to evolve through time. This paper investigates the relationship among main building structures, infill elements, and space by studying examples in ancient Chinese architecture. It reveals the role of building owners, users, and craftsmen from a survey of historical documentation. In studying these examples, it is concluded that craftsmen in ancient China were involved not only during the construction phase but throughout the period of use as well. Thus, in select cases, the relationship between craftsmen and owners or users had been preserved for generations. Finally, this paper suggests potential strategies for the building industry and technology in the move towards sustainable development.

Details

Open House International, vol. 36 no. 4
Type: Research Article
ISSN: 0168-2601

Keywords

Access Restricted. View access options
Article
Publication date: 14 March 2018

Keryn Chalmers, David Hay and Hichem Khlif

In 2001, the US moved to regulate internal control reporting by management and auditors. While some jurisdictions have followed the lead of the US, many others have not. An…

4532

Abstract

In 2001, the US moved to regulate internal control reporting by management and auditors. While some jurisdictions have followed the lead of the US, many others have not. An important question, therefore, is the relevance of internal control to stakeholders. The more specific issue of the benefits of US-style regulation of internal control reporting is also topical. We review studies on the determinants of internal control quality and its economic consequences for stakeholders including investors, creditors, managers, auditors and financial analysts. We extend previous reviews by focusing on US studies published since 2013 as well as all non-US studies investigating IC quality including countries regulating IC disclosure as well as unregulated settings and both developed and developing economies. In doing so, we identify research questions where evidence remains mixed and new directions in which there are research opportunities.

Three main insights arise from our analysis. First, evidence on the economic consequences of internal control quality suggests that the quality of internal control can have a significant effect on decision making by users of financial information. Second, the results of research on the empirical association between ownership structure, certain board characteristics and internal control quality is generally mixed. Empirical evidence concerning the association between audit committee characteristics and internal control quality generally supports a positive and significant association. Finally, while studies in non-US jurisdictions are increasing, opportunities remain to explore the determinants and consequences of internal control in other jurisdictions. Our review provides evidence for policy makers of whether there are benefits from requiring management and auditors to report on internal control over financial reporting.

Details

Journal of Accounting Literature, vol. 42 no. 1
Type: Research Article
ISSN: 0737-4607

Keywords

Access Restricted. View access options
Article
Publication date: 1 October 2005

George K. Chacko

Wireless communication, comprising telecommunication industry products and services which move voice, video, data, and graphics at the speed of the electron, is the back bone of…

1386

Abstract

Wireless communication, comprising telecommunication industry products and services which move voice, video, data, and graphics at the speed of the electron, is the back bone of the Internet. We have today a wireless world which two Chief ‘Ntrepreneur Officers (CNOs)‐American Sam Ginn (AirTouch) and Britisher Chris Gent (Vodafone)‐created by their Memory Management during the 16 years between Olympics in Los Angeles (1984) and Olympics in Sydney (2000).

Details

Management Research News, vol. 28 no. 10
Type: Research Article
ISSN: 0140-9174

Keywords

Available. Open Access. Open Access
Article
Publication date: 15 December 2022

Sigit and Rachel Shannon Twigivanya

This paper examines Malaysia's perception of China following the Asian Financial Crisis. The Asian Financial Crisis, which occurred in 1997, resulted in a contraction in…

885

Abstract

This paper examines Malaysia's perception of China following the Asian Financial Crisis. The Asian Financial Crisis, which occurred in 1997, resulted in a contraction in Malaysia's GDP, which resulted in increased unemployment in Malaysia. China is a rising economy. Several bilateral visits and trade missions meet both states to achieve an advantageous economic position. Malaysia's decision to rely on China despite historical events that had sparked tensions between the two countries. Despite Malaysia's economic downturn, the country is taking swift action to address the issue. During the crisis, Malaysia viewed Western countries as irresponsible and allowed the situation to deteriorate, which later became the reason for Malaysia's relationship with China. The crisis, however, has influenced Malaysian Chinese businesses to improve their foreign policy and bilateral relations. This paper contends that Malaysia recognizes the importance of its bilateral relationship with China in stabilizing its economic development and social activity following the crisis.

Details

Southeast Asia: A Multidisciplinary Journal, vol. 22 no. 2
Type: Research Article
ISSN: 1819-5091

Keywords

1 – 10 of 83
Per page
102050