Search results

Roller compacted concrete (RCC) pavement is used in areas subjected to heavy impact loads; therefore, higher impact resistance is a desirable property of consideration. This study aims to investigate the effect of partial replacement of fine aggregate with crumb rubber (CR) and the addition of nanosilica (NS) by weight of cementitious materials on the impact resistance of roller compacted rubbercrete (RCR).

Four replacement levels of CR (0, 10, 20 and 30 per cent) and four addition levels of NS (0, 1, 2 and 3 per cent) were considered. The impact resistance test was carried out using the drop weight test recommended by ACI 544.

The results showed that the impact resistance of RCR increases with an increase in both CR and NS addition, though for CR above 20 per cent, sudden drop in impact resistance was observed. However, NS reduces the ductility of RCR by decreasing the post-cracking impact resistance. Response surface methodology was used to develop models for predicting the impact resistance of RCR, and the developed models showed a high degree of correlation. As a result of wide variations in the impact drop test data, two-parameter Weibull distribution function was used for the data analysis, and it was found that the probabilistic distributions of the first crack and ultimate failure impact resistance follow the two-parameter Weibull distribution function.

In this work, the effect of partial replacement of fine aggregate with CR and the addition of NS by weight of cementitious materials on the impact resistance of RCC pavement has been investigated. CR has been used to increase the impact resistance of RCC Pavement.

This paper analyses the Mohammed cartoons controversy, the boycott of Danish products in the Middle East, and the consequences for the Danish companies involved.

The objectives have been achieved by means of a ideology‐critical discourse analysis of Danish newspaper articles on the subject.

The wider ramifications of an insult and freedom of expression discourse are shown. Managerial consequences of the boycott are outlined for Jyllands‐Posten and Arla Foods.

The paper is of value for researchers and managers who want to understand the politicisation of markets and the major consequences for management and marketing strategy.

The study aims to investigate the low-velocity impact (LVI) on the surface of a beam with a changeable cross-sectional area. In the study “LVI on a beam with a changeable cross-sectional area and clamped-free boundary conditions”, the effect of changes in the cross-section are on the contact force, the beam displacement, the impactor displacement and the impactor velocity are investigated.

To obtain the motion equations, first, a field of displacements of the beam is written using third-order shear deformation of beams, including the exponential shear–strain function, and then the energy method is used. By combining Hamilton’s approaches and Ritz’s method, finally, the equations of motion are extracted. Using ABAQUS finite element code, validation of the theoretical approach is carried out. In this study, the beam with changeable cross-sectional area is considered in such a way that the height of the beam is constant, but the width of the beam changes linearly.

The results show that assuming the width of the beam in the clamped support is constant, an increase in the width of the beam in the free support leads to an increase in the peak contact force and the residual velocity of the impactor, also, the peak displacement of the beam and the impactor are decreased.

It can be shown from the analysis of LVI on beams with nonuniform cross-sectional area that the important influence on the contact force, impactor residual velocity, beam displacement and impactor displacement is achieved.

The purpose of this paper is to investigate the effect of graphene platelets (GPLs) on the low-speed contact between a mass and surface of a multi-layer polymer beam.

This problem is primarily organized by first-order shear deformation beam theory and nonlinear Hertz rule. GPLs are distributed along the beam thickness direction. The Halpin–Tsai micromechanics model is applied for computing the effective Young’s modulus of the GPLs/polymer composites. In the formulation process, the principle of conservation of energy is first used and the histories of results are extracted using the separation of variables and Runge–Kutta method.

In comparing the responses with the available data, a good agreement is observed. The effects of the weight fraction and distribution pattern on the impact response of polymer beam reinforced with GPLs are studied. Results show that contact force is increased, contact time and beam recess are decreased with increasing of weight fraction of GPLs. Also, among the different distribution patterns, the contact force depended on value of GPLs at the point of contact.

The effects of GPLs addition on the multi-layer polymer beam has a novelty in impact problems.

The purpose of this paper is to present an applied method to design the low-speed contact between a mass and surface of a beam using an analytical solution based on the first-order shear deformation beam theory. Also, a simulation of impact process is carried out by ABAQUS finite element (FE) code.

In theoretical formulation, first strains and stresses are obtained, then kinetic and potential energies are written, and using a combination of Ritz and Lagrange methods, a set of system of motion equations in the form of mass, stiffness and force matrices is obtained. Finally, the motion equations are solved using Runge–Kutta fourth order method.

The von Mises stress contours at the impact point and contact force from the ABAQUS simulation are illustrated and it is revealed that the theoretical solution is in good agreement with the FE code. The effect of changes in projectile speed, projectile diameter and projectile mass on the results is carefully examined with particular attention to evaluate histories of the impact force and beam recess. One of the important results is that changes in projectile speed have a greater effect on the results than changes in projectile diameter, and also changes in projectile mass have the least effect.

This paper presents a combination of methods of energy, Ritz and Lagrange and also FE code to simulate the problem of sandwich beams under low velocity impact.

The purpose of this paper is to evaluate the possible use of oil shale as a soil stabilizing agent for expansive soils.

An experimental work has been fulfilled to investigate the influence of oil shale ash (OSA) on the geotechnical behavior of the expansive soil of Irbid, Jordan. Three swelling-shrinkage soils were considered in this study along with various percentages of OSA varying at 2, 4, 6, 8, 10 and 12 per cent by dry weight of the soil. A series of laboratory tests were conducted on the soil samples before and after mixing it with OSA. These tests were soil classification, Atterberg limits, compaction test, falling head permeability test, unconfined compression test, free swelling, swelling pressure and California bearing ratio (CBR) test.

Laboratory tests results indicated that OSA is effective in improving the texture and strength of the treated soil by reducing plasticity index, swelling potential and swelling pressure and moderately enhancing soil strength properties including the unconfined compressive strength (q_u), maximum dry unit weight (γ_d-max.) and CBR test.

OSA showed potential as a low-cost soil stabilizing agent for swell-shrink soils.