Abdul Munir Hidayat Syah Lubis, Bambang Ariwahjoedi and Mustafar Sudin
This study aims to characterize the composition of the tribo-layer formed during sliding of steel in the presence of crude jatropha oil (CJO) and epoxidized jatropha oil (EJO…
Abstract
Purpose
This study aims to characterize the composition of the tribo-layer formed during sliding of steel in the presence of crude jatropha oil (CJO) and epoxidized jatropha oil (EJO) under boundary lubricant application.
Design/methodology/approach
CJO was obtained from a local market and used as received. EJO was obtained by epoxidation process with peroxyformic acid catalyzed by acidic ion exchange resin. The tribological test was conducted by the four ball method according to ASTM 4192. Wear scars generated on the lower balls were used to characterize the tribo-layer. Energy-dispersive X-ray and X-ray photo spectroscopy analysis were conducted to characterize the tribo-layer composition.
Findings
EJO shows a lower friction coefficient compared to CJO. Moreover, EJO also shows better wear preventive properties compared to CJO. The oxidation of CJO and EJO has lead chemisorption of the oil to steel surface to cause formation of protective layers for the steel surface. The layers were constructed from inorganic oxide in the form of iron oxides and silicon oxide together with organic layers in form of aldehyde, ketone and carboxylic acid. The formation and removal of this layer from rubbing sites are considered to affect wear-preventive and friction behaviour of steel lubricated with CJO and EJO.
Originality/value
This works highlights friction and anti-wear characteristics of CJO and EJO. This work also presents the composition of the tribo-layer that formed because of the sliding of steel lubricated with CJO and EJO. The method and result can be used for further investigation and development of lubricant.
Details
Keywords
Mas Irfan Purbawanto Hidayat, Bambang Ariwahjoedi and Setyamartana Parman
The purpose of this paper is to present a new approach of meshless local B-spline based finite difference (FD) method for solving two dimensional transient heat conduction…
Abstract
Purpose
The purpose of this paper is to present a new approach of meshless local B-spline based finite difference (FD) method for solving two dimensional transient heat conduction problems.
Design/methodology/approach
In the present method, any governing equations are discretized by B-spline approximation which is implemented in the spirit of FD technique using a local B-spline collocation scheme. The key aspect of the method is that any derivative is stated as neighbouring nodal values based on B-spline interpolants. The set of neighbouring nodes are allowed to be randomly distributed thus enhanced flexibility in the numerical simulation can be obtained. The method requires no mesh connectivity at all for either field variable approximation or integration. Time integration is performed by using the Crank-Nicolson implicit time stepping technique.
Findings
Several heat conduction problems in complex domains which represent for extended surfaces in industrial applications are examined to demonstrate the effectiveness of the present approach. Comparison of the obtained results with solutions from other numerical method available in literature is given. Excellent agreement with reference numerical method has been found.
Research limitations/implications
The method is presented for 2D problems. Nevertheless, it would be also applicable for 3D problems.
Practical implications
A transient two dimensional heat conduction in complex domains which represent for extended surfaces in industrial applications is presented.
Originality/value
The presented new meshless local method is simple and accurate, while it is also suitable for analysis in domains of arbitrary geometries.