Search results

During the past several years, research and studies in the field of solar energy have been continuously increased. One of the substantial applications of solar energy is related to industrial utilization for the drying process by efficient heat transfer methods. This study aims to upgrade the overall performance of an indirect solar dryer using a solar absorber extension tube (SET) equipped with ball-type turbulators.

In this work, three various SETs including hollow (SET Type 1), 6-balls (SET Type 2) and 10-balls (SET Type 3), have been simulated using Fluent software to evaluate heat transfer characteristics and flow structure along the air passage. Then, the modified solar drying system has been manufactured and tested at different configurations.

The findings indicated that adding a SET improved the performance notably. According to the results, using turbulators in the tube has a positive effect on heat transfer. The highest overall thermal efficiency was found in the range of 51.47%–64.71% for the system with SET Type 3. The maximum efficiency increment of the system was found as 19% with the use of SET. Also, the average specific moisture extraction rate, which is a significant factor to survey the effectiveness of the dehumidification system was found between 0.20 and 0.38 kg kWh⁻¹.

In the present study, a novel SET has been developed to upgrade the performance of the solar dehumidifier. This new approach makes it possible to improve both thermal and drying performances.

Over the recent years, solar energy has received outstanding attention from researchers. Solar energy applications and related large-scale projects are increasing to meet growing global energy demand as an economical, non-polluting and renewable energy source. The purpose of this study is investigating different plenum and absorber configurations of solar air heating wall (SAHW) experimentally and numerically.

In this study, various configurations of SAHW have been numerically simulated to determine the most effective design. According to the simulation results, two SAHWs with various plenum thicknesses have been fabricated and tested at different conditions.

Numerical simulation results indicated that parallel-flow SAHWs exhibited better performance in comparison with other placements of absorber plate. Regarding to the experimentally attained results, the highest thermal efficiency was reached to 80.51%. Also, the average deviation between experimentally and numerically obtained outlet temperature is 5.5%.

Considering the obtained results in the present study, designed SAHW has admissible efficiency to be used in various industrial and residential applications such as; air preheating, space heating and drying.

Heat exchangers (HEs) which provide heat transfer and transfer energy through direct or indirect contact between fluids have an essential role in many processes as a part of various industries from pharmaceutical production to electronic devices. Using nanofluid as working fluid and integrating different types of turbulators could be used to upgrade the thermal effectiveness of HEs. Recently, to obtain more increment in thermal effectiveness, hybrid nanofluids are used that are prepared by mixing two or more various nanoparticles. The purpose of this experimental and numerical study is investigating different scenarios for improving the effectiveness of a concentric U-tube type HE.

In the numerical section of this study, different turbulator modifications, including circular and quarter circular rings, were modeled to determine the effect of adding turbulator on thermal performance. In addition, Al₂O₃/water and SiO₂/water single and Al₂O₃–SiO₂/water hybrid nanofluids were experimentally tested in an unmodified concentric U-tube HE in two different modes, including counter flow and parallel flow. Al₂O₃–SiO₂/water hybrid nanofluid was prepared at 2% (wt./wt.) particle ratio and compared with Al₂O₃/water and SiO₂/water single type nanofluids at same particle ratios and with distilled water.

Numerical modeling findings exhibited that integrating turbulators to the concentric tube type HE caused to raise in the effectiveness by improving heat transfer area. Also, experimental results indicated that using both hybrid and single type nanofluids notably upgraded the thermal performance of the concentric U-tube HE. Integrating turbulators cannot be an effective alternative in a concentric U-tube type HE with lower diameter because of raise in pressure drop. Numerically achieved findings exhibited that using quarter circular turbulators decreased pressure drop in comparison with circular turbulators. According to the experimental outcomes, using hybrid Al₂O₃–SiO₂/water nanofluid leads to obtain more thermal performance in comparison with single type nanofluids. The highest increment in overall heat transfer coefficient of HE by using Al₂O₃–SiO₂/water nanofluid achieved as 58.97% experimentally.

The overall outcomes of the current research exhibited the positive impacts of using hybrid nanofluid and integrating turbulators. In this empirical and numerical survey, numerical simulations were performed to specify the impact of applying different turbulators and hybrid nanofluid on the flow and thermal characteristics in a concentric U-tube HE. The achieved outcomes exhibited that using hybrid nanofluid can notably increase the thermal performance with negligible pressure drop in comparison with two different turbulator modifications.

Using suspended nanoparticles in the base fluid is known as one of the most efficient ways for heat transfer augmentation and improving the thermal efficiency of various heat exchangers. Different types of nanofluids are available and used in different applications. The main purpose of this study is to investigate the effects of using hybrid nanofluid and number of plates on the performance of plate heat exchanger. In this study, TiO₂/water single nanofluid and TiO₂-Al₂O₃/water hybrid nanofluid with 1% particle weight ratio have been used to prepare hybrid nanofluid to use in plate type heat exchangers with three various number of plates including 8, 12 and 16.

The experiments have been conducted with the aim of examining the impact of plates number and used nanofluids on heat transfer enhancement. The performance tests have been done at 40°C, 45°C, 50°C and 55°C set outlet temperatures and in five various Reynolds numbers between 1,600 and 3,800. Also, numerical simulation has been applied to verify the heat and flow behavior inside the heat exchangers.

The results indicated that using both nanofluids raised the thermal performance of all tested exchangers which have a various number of plates. While the major outcomes of this study showed that TiO₂-Al₂O₃/water hybrid nanofluid has priority when compared to TiO₂/water single type nanofluid. Utilization of TiO₂-Al₂O₃/water nanofluid led to obtaining an average improvement of 7.5%, 9.6% and 12.3% in heat transfer of heat exchangers with 8, 12 and 16 plates, respectively.

In the present work, experimental and numerical analyzes have been conducted to investigate the influence of using TiO₂-Al₂O₃/water hybrid nanofluid in various plate heat exchangers. The attained findings showed successful utilization of TiO₂-Al₂O₃/water nanofluid. Based on the obtained results increasing the number of plates in the heat exchanger caused to obtain more increment by using both types of nanofluids.