Search results

The government has taken an initiative to improve the MBBS admission process in the country to eradicate the academic dishonesty and encourage the deserving candidates for MBBS enrolment. The Supreme Court has paved the way to hold the National Eligibility-cum-Entrance Test (NEET), a common entrance test for admission to undergraduate and postgraduate medical courses, from the 2016-17 academic year onwards. This paper aims to focus on the contention raised by various stakeholders associated with it and examines the pass percentage of plus two State Board examinations in 2015, 2016 and 2017 and admission details for 2016 and 2017.

The researchers adopted exploratory research. The researchers studied the medical admission process at national and global levels. They collected data of MBBS admission, NEET, State Board and CBSE plus two results and information from newspapers, website and magazine articles. Many experts published articles in newspapers. No study analysed data and made an exhaustive exploratory study. This motivates the researcher to do the same. Simple percentage, percentage change, correlation analysis and the sign test are used to determine whether the State Board or CBSE students get benefitted out of NEET to become medical professionals.

There is no significant relationship between MBBS enrolment of students (both State Board and CBSE students) before and after the NEET was introduced. From correlation analysis, it is inferred that the pass percentage of students who studied under State Board and MBBS enrolment were lesser in 2017 than 2016. It is also inferred that many districts students’ enrolment in MBBS course have increased from 2016 to 2017. The researchers concluded that because of NEET, CBSE students got more enrolment in MBBS course in 2017 compared with State Board students in 2016.

The researchers found that the students with State Board examinations enrolled in lesser number for MBBS course than CBSE students in Tamil Nadu. There is a scope for improvement in designing and implementing NEET with the deliberations among different stakeholders involved with the medical education system, which will help in reducing the rampant corruption and, most importantly, pave the way for a selection based on merit in medical education. Possibly, this will also work as a safeguard to the sanctity of the medical profession in India and at the global level.

The researcher collected data from newspapers, websites and journals. Many experts discuss about, for and against NEET. No one analysed the data. This is a unique article that has more statistical analysis and meaningful interpretations from analysis. This paper will be useful to the government at national and global levels to frame medical admission procedure and policies.

THE Tsing Hua 15‐ft. wind tunnel, with interchangeable 18‐ft. section for full scale engine and airscrew tests, was recently erected in Central China. It was planned as the central organ for aerodynamic research in China and, as such, was subject to interesting design conditions. The main features of the tunnel design, as well as the considerations underlying their choice, are described in this article.

Nowadays, ample industries are fascinated to look for high strength and light weight materials for the development of robust parts. Because of light weight and high stiffness to weight ratio; usage of aluminum parts is growing rapidly, especially in automotive engineering. Process improvement of Al alloys and their grain structure refinement is the current area of interest in casting companies. In this research work, an investigation has been carried out to enhance the process improvement of die casting by optimization of various significant parameters and their refinement of grains by the effect of Nb-C novel grain refiner.

L27 orthogonal array (OA) has been considered to optimize the preferred casting input parameters such as molten metal temperature (°C), die temperature (°C), injection pressure (bar), Al-3.5Nb-1.5 C novel grain refiner and Ni alloying additions as key process parameters in order to increase the quality and efficiency of Al-9Si-3Cu aluminum alloy die casting by reducing the porosity formation.

It was observed that the porosity values have significantly decreased from 0.88% to 0.25% particularly at 0.1 wt.% of new grain refiner and 0.5 wt. % of Al-6Ni master alloy. As per the ANOVA results, it was observed that Al-3.5FeNb-1.5 C grain refiner (F value 2609.22), Al-6Ni alloying addition (F value 1329.13), molten metal temperature (F value 1002.43) and, injection pressure (F value 448.06) are the factors that significantly affects the porosity, whereas die temperature was found to be insignificant. The results show that new grain refiner is one the most significant factor among the other selected parameters. The contribution of the new grain refiner to the variation of mean casting porosity is around 57.74%. confidence interval (CI) has also been estimated as 0.013 for 95% consistency level to validate the predicted range of optimum casting porosity of aforesaid alloy.

To the best of the authors' knowledge, no study has been conducted in the past to investigate the combined effect of these die casting parameters and composition factors for the development of Al-Si robust cast parts. The paper represents original research and provides new information for the fabrication of die casting parts.

This paper aims to evaluate the vulnerability of typical low-rise reinforced concrete (RC) buildings located in Indonesia subjected to tsunami loading.

The vulnerability of typical three-story RC buildings located in Indonesia subjected to tsunami loading is discussed using fragility curves. Buildings without openings in all stories and buildings with openings in the first story are considered. The fragility curves are obtained by performing tsunami pushover analysis for several load cases, using different tsunami load estimation standards and references. The generalized linear method is used as a curve fitting method to construct the fragility curves.

The fragility curves show that the three-story RC buildings without openings in all stories subjected to tsunami loading have a high probability of collapse. Openings in the first story will reduce the vulnerability of the buildings.

Fragility curves are obtained by carrying out tsunami pushover analysis to evaluate the vulnerability of typical three-story RC buildings located in Indonesia. The results of this study show the need to include tsunami loads in the design code for Indonesian buildings and the benefits of having openings in the first story of the building.

The growing quantity of waste is a worrying reality that has resulted in environmental sustainability challenges. Waste paper sludge (WPS) in large quantities from paper mill industry are produced every year. Their disposal in landfills, in general, pollutes the environment. Cement manufacture also contributes to global warming by emitting carbon dioxide. As a result, a novel use of industrial wastes as a supplemental cementitious ingredient in concrete formulation can help to mitigate the environmental problem. This paper aims to study the possibility of usage of WPS as partial replacements of cement for sustainable development of concrete.

This study aims at testing the mechanical properties of concrete that has been mixed with WPS. Between 5% and 20% of the weight of cement, WPS was used to substitute it. The water binder ratios of 0.55, 0.50, 0.45 and 0.42 were all considered for an experiment to better understand the impact of WPS on concrete. In terms of workability, density, water absorption (WA), compressive strength (CS) and flexural strength (FS), concrete mixtures were created, tested and compared to traditional concrete mixes.

According to the findings, the initial and final setting times of the concrete mixtures were both significantly delayed, and the workability and density of the concrete mixtures were both significantly lowered at all water binder ratios and replacement levels. Both compressive and FS of concrete made with WSP declined significantly at all water binder ratio. Substitution of cement by WPS enhanced the WA of all the concrete mixes. The mechanical performance of concrete mixtures that were made with a replacement level of 5% exhibited noticeable improvements. Whereas the more is the replacement levels the more the loss in the mechanical properties were noted. The ideal replacement levels for the WPS are up to 5% only.

This paper contributes to the literature by exploring the ecological and sustainable effects of using WPS in construction materials.

This paper aims to present an efficient and simplified proportional-integral/proportional-integral and derivative controller design method for the higher-order stable and integrating processes with time delay in the cascade control structure (CCS).

Two approaches based on model matching in the frequency domain have been proposed for tuning the controllers of the CCS. The first approach is based on achieving the desired load disturbance rejection performance, whereas the second approach is proposed to achieve the desired setpoint performance. In both the approaches, matching between the desired model and the closed-loop system with the controller is done at a low-frequency point. Model matching at low-frequency points yields a linear algebraic equation and the solution to these equations yields the controller parameters.

Simulations have been conducted on several examples covering high order stable, integrating, double integrating processes with time delay and nonlinear continuous stirred tank reactor. The performance of the proposed scheme has been compared with recently reported work having modified cascade control configurations, sliding mode control, model predictive control and fractional order control. The performance of both the proposed schemes is either better or comparable with the recently reported methods. However, the proposed method based on desired load disturbance rejection performance outperforms among all these schemes.

The main advantages of the proposed approaches are that they are directly applicable to any order processes, as they are free from time delay approximation and plant order reduction. In addition to this, the proposed schemes are capable of handling a wide range of different dynamical processes in a unified way.

This study attempts to determine whether the level and volatility of interest rates affect the equity returns of commercial banks. Short‐term, intermediate‐term, and long‐term interest rates are used. Volatility is defined as the conditional variance of respective interest rates and is generated by using the ARCH estimation procedure. Two sets of models are estimated. The basic models attempt to determine the effect of contemporaneous and lagged interest rate volatility on bank equity returns, while the extended models incorporate additional contemporaneous macroeconomic variables. Contemporaneous interest rate volatility has little explanatory power, while lagged volatilities do possess some explanatory power, with the lag length varying depending on the interest rate series used and the time period examined. The results from the extended model suggest that the long‐term interest rate affects bank equity returns more adversely than the short‐term or the intermediate‐term interest rates. The findings establish the relevance of incorporating macroeconomic variables and their volatilities in models determining bank equity returns.

This paper aims to get the optimal controller parameters of fractional order proportional integral derivative (FOPID)/proportional integral derivative (PID) i.e. K_p, K_i, K_d, λ and µ for designing controller in automatic voltage regulator (AVR) system.

A novel method is proposed to get the optimal controller parameters for designing controller in AVR system using improved Jaya algorithm (IJA). The time domain objective and regular integral error objectives are used to design the controller to estimate the performance of the AVR system based on optimal tuning FOPID/PID controller.

The proposed method captures time domain objective of the FOPID/PID controller design and demonstrates effective transient response and better control action. The efficient tuning of FOPID controller results in high superiority of control efforts.

The simulations of IJA-based FOPID/PID controller design method are performed in MatLab tool and compared with several methods in the recent state of the art and the same are observed to be robust for the AVR system.

The developed optimal FOPID/PID controller tuning using IJA optimization method is totally a new approach for the AVR system in the literature.

The purpose of this paper was to use the barnacle Amphibalanus amphitrite reared in the laboratory to investigate the effects of juveniles on corrosion behaviour of three stainless steels (SS): UNS S31600, N08904 and UNS S32760.

Barnacle larvae were maintained in a laboratory until they reached the cypris larval stage. A total of 100 cyprids were added to four individual containers; each SS coupon (70 × 50 × 2 mm3) was immersed into the containers. After the cyprids attached to the coupons, juveniles were reared for 21 days with the microalgae Skeletonema costatum (Greville) Cleve. Values of open circuit potential (OCP), breakdown potential (Eb) and polarisation resistance (Rp) were evaluated, along with surface examinations.

OCP differences between barnacles and control coupons were not apparent. However, the lowest values of Eb and Rp were observed in the presence of juvenile barnacles, demonstrating the SS corrosion caused by these organisms. Crevice corrosion around the base of the barnacles was detected during visual inspections, despite the small size of the barnacles and the short duration of the experiments.

The A. amphitrite assays were useful as a tool for testing corrosion behaviour of the SS under laboratory conditions. This was the first study to test the use of this common protocol in anti-fouling research as a method to study marine biocorrosion.

This study aims to critically evaluate the competitiveness of Transformer-based models in financial forecasting, specifically in the context of stock realized volatility forecasting. It seeks to challenge and extend upon the assertions of Zeng et al. (2023) regarding the purported limitations of these models in handling temporal information in financial time series.

Employing a robust methodological framework, the study systematically compares a range of Transformer models, including first-generation and advanced iterations like Informer, Autoformer, and PatchTST, against benchmark models (HAR, NBEATSx, NHITS, and TimesNet). The evaluation encompasses 80 different stocks, four error metrics, four statistical tests, and three robustness tests designed to reflect diverse market conditions and data availability scenarios.

The research uncovers that while first-generation Transformer models, like TFT, underperform in financial forecasting, second-generation models like Informer, Autoformer, and PatchTST demonstrate remarkable efficacy, especially in scenarios characterized by limited historical data and market volatility. The study also highlights the nuanced performance of these models across different forecasting horizons and error metrics, showcasing their potential as robust tools in financial forecasting, which contradicts the findings of Zeng et al. (2023)

This paper contributes to the financial forecasting literature by providing a comprehensive analysis of the applicability of Transformer-based models in this domain. It offers new insights into the capabilities of these models, especially their adaptability to different market conditions and forecasting requirements, challenging the existing skepticism created by Zeng et al. (2023) about their utility in financial forecasting.