Search results

Coupled metallographic examination and heat transfer numerical simulation are applied to reveal the laser sintering mechanisms of Ti powder of 63‐315 μm particle diameter. A Nd:YAG laser beam with a diameter of 2.7‐5.3 mm and a power of 10‐100 W is focused on a bed of loose Ti powder for 10 s in vacuum. The numerical simulation indicates that a nearly hemispherical temperature front propagates from the laser spot. In the region of α‐Ti just behind the front, heat transfer is governed by thermal radiation. The balling effect, formation of melt droplets, is not observed because the temperature increases gradually and the melt appears inside initially sintered powder which resists the surface tension of the melt.

This study aims to develop a holistic method that integrates finite element modeling, machine learning, and experimental validation to propose processing windows for optimizing the laser powder bed fusion (LPBF) process specific to the Al-357 alloy.

Validation of a 3D heat transfer simulation model was conducted to forecast melt pool dimensions, involving variations in laser power, laser scanning speed, powder bed thickness (PBT) and powder bed pre-heating (PHB). Using the validated model, a data set was compiled to establish a back-propagation-based machine learning capable of predicting melt pool dimensional ratios indicative of printing defects.

The study revealed that, apart from process parameters, PBT and PHB significantly influenced defect formation. Elevated PHBs were identified as contributors to increased lack of fusion and keyhole defects. Optimal combinations were pinpointed, such as 30.0 µm PBT with 90.0 and 120.0 °C PHBs and 50.0 µm PBT with 120.0 °C PHB.

The integrated process mapping approach showcased the potential to expedite the qualification of LPBF parameters for Al-357 alloy by minimizing the need for iterative physical testing.